header06
header05
header04
header03
header02
header01
header
header13
header12
header09
header11
header10
header08
header07


2024

Sölle, B., Reisinger, D., Heupl, S., Jelinek, A., Schlögl, S., Rossegger, E. (09/2024). "Reshapable bio-based thiol-ene vitrimers for nanoimprint lithography: Advanced covalent adaptability for tunable surface properties", Reactive and Functional Polymers, Vol. 202, Art. Nr. 105972, DOI: 10.1016/j.reactfunctpolym.2024.105972

Babin, M., Eder, G. C., Voronko, Y., Oreski, G. (08/2024). "Water vapor permeability of polymeric packaging materials for novel glass-free photovoltaic applications, Journal of applied Polymer Science, Vol. 141, Issue 30, Art. Nr. e55694, DOI: 10.1002/app.55733

Geier, J., Barretta, C., Hinczica, J., Haar, B., Bredács, M., Witschnigg, A., Mayrbäurl, E., Oreski, G. (08/2024). "Feasibility study on the production of low melt flow rate recycled polypropylene from postconsumer waste", Journal of Applied Polymer Science, Vol. 141, Issue 30, Art. Nr. e55694, DOI: 10.1002/app.55694

Adothu, B., Kumar, S., John, J. J., Oreski, G., Mathiak, G., Jäckel, B., Alberts, V., Jahangir, J. B., Alam, M. A., Gottschalg, R. (08/2024). "Comprehensive review on performance, reliability, and roadmap of c-Si PV modules in desert climates: A proposal for improved testing standard", Progress in Photovoltaics: Research and Applications, Vol. 32, pp 495 - 527, DOI: 10.1002/pip.3827

Sharma, H., Bender, M., Kim, G., Lee, D., Caglayan, C., Schlögl, S., Yun, G. J., Kumar, A., Rana, S. (08/2024). "Reprocessable carbon fiber vitrimer composites: Reclamation and reformatting of carbon fibers for second generation composite materials", Journal of Applied Polymer Science, e56074, DOI: 10.1002/app.56074

Traintinger, M., Azevedo, M., Kerschbaumer, R. C., Lechner, B., Lucyshyn, T. (07/2024). "Optimization Strategy for Process Design in Rubber Injection Molding: A Simulation-Based Approach Allowing for the Prediction of Mechanical Properties of Vulcanizates"; Polymers, Vol. 16, Issue 14, Art. Nr. 2033, DOI: 10.3390/polym16142033

Theiler, G., Cano Murillo, N., Hausberger, A. (07/2024). "Effect of Hydrogen Pressure on the Fretting Behavior of Rubber Materials", Lubricants, Vol. 12, Issue 7, Art. Nr. 233, DOI: 10.3390/lubricants12070233

Gleirscher, M., Kopp, D., Hausberger, A., Angerer, P., Lackner, J., Schlögl, S. (07/2024). "Characterization of atmospheric pressure plasma deposited (APPD) coatings to improve the friction behavior of thermoplastic surfaces", Surface and Coatings Technology, Vol. 488, Art. Nr. 131040, DOI: 10.1016/j.surfcoat.2024.131040 

Fleisch, M., Thalhamer, A., Schlögl, S., Fuchs, P. F., Pinter, G., Berer, M. (06/2024). "MetamaterialFinder: a software framework for discovering and analyzing mechanical metamaterials based on simple closed curves", Advances in Engingeering Software, Vol. 192, 103626, DOI: https://doi.org/10.1016/j.advengsoft.2024.103626

Schrank, T., Ramoa, B., Feuchter, M., Pinter, G., Pantani, R., Berer, M. (05/2024). "Morphological structure and mechanical properties of a nucleated Polyexymethylene (POM) homopolymer resin processed under conventional injection molding conditions", Polymer Testing, Vol. 134, 108444, DOI: https://doi.org/10.1016/j.polymertesting.2024.108444

Jafari-Tabrizi, A., Gruber, D. P., Gams, A. (04/2024). "Exploiting image quality measure for automatic trajectory generation in robot-aided visual quality inspection", The Internationl Journal of Advanced Manufacturing Technology, DOI: https://doi.org/10.1007/s00170-024-13609-5

Yu, Q., Kamble, V. G., Gruber, D. P., Fuchs, P. F., Fendt, K., Krivec, T. (04/2024). "Literature Review: Global Critcality Assessment Based on Feature Surrogates at the PCBA Levels", IEEE Xplore, 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micorsystems (EuroSimE), DOI: https://10.1109/EuroSimE60745.2024.10491544

Kasinikota, V. P., Muehleisen, W., Grinschgl, M., Steiner, A., Hasil, S., Lang, M. C. (04/2024). "Characterization and Modeling of Cure-Induced Thermo Mechanical Properties and Chemical Shrinkage of Epoxy Resins", IEEE Xplore, 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micorsystems (EuroSimE), DOI: https://10.1109/EuroSimE60745.2024.10491441

Peng, C., Tao, Q., Krivec, T., Casas, G., Latorre, S., Antretter, T., Macher, J., Fuchs, P. (04/2024). "Exploring the Impact of Laser Drilling on Material Thermal Decomposition: A Computational Study Using KratosMultiphysics", IEEE Xplore, 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micorsystems (EuroSimE), DOI: https://10.1109/EuroSimE60745.2024.10491467

Kamble, V. G., Patel, D. R., Schipfer, C., Thalhamer, A., Zuendel, J., Krivec, T., Antretter, T., Fuchs, P. F. (04/2024). "A comprehensive methodology for criticality assessment of microvias in printed circuit board assemblies", IEEE Xplore, 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micorsystems (EuroSimE), DOI: https://10.1109/EuroSimE60745.2024.10491487

Porathur, F. J., Kamble, V. G., Stadler, E., Huber, F., Gruber, D. P., Fuchs, P. F. (04/2024). "Warpage Optimization of Package Substrates Using Metamodels - A Review", IEEE Xplore, 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micorsystems (EuroSimE), DOI: https://10.1109/EuroSimE60745.2024.10491528

Kasinikota, V. P., Muehleisen, W., Grinschgl, M., Steiner, S., Hasil, S., Lang, M. C. (04/2024). "Characterization and Modeling of Cure-Induced Thermo Mechanical Properties and Chemical Shrinkage of Epoxy Resins", IEEE Xplore, https://doi.org/10.1109/EuroSimE60745.2024.10491441

Pijáková, B., Elbataioui, A., Rafailovic, L., Bautista, A. D., Schlögl, S., Dvoráková, E., Mühlbacher, I., Ráhel, J., (04/2024). "Plasma Modification of Polyacrylonitrile Powder or Solution Prior Electrospinning", In 15th International Conference on Nanomaterials-Research and Application: NANOCON 2023 (pp. 154 - 159). Tanger Ltd., Ostrava

Clute, C., Balasooriya, W., Murillo, N. C., Theiler, G., Kaiser, A., Fasching, M., Schwarz, T., Hausberger, A., Pinter, G., Schlögl, S. (04/2024). "Morphological investigations on silica and carbon-black filled acrylonitrile butadiene rubber for sealings used in high-pressure H2 applications", International Journal of Hydrogen Energy, 67, 540 - 552, DOI: https://doi.org/10.1016/j.ijhydene.2024.04.133

Wanghofer, F., Kriehuber, M., Reisinger, D., Floh, F., Wolfahrt, M., Schlögl, S. (04/2024). "Design of Reversible Adhesives by Using a Triple Function of Ionic Liquids", Macromolecular Materials and Engineering. 2400011, DOI: https://doi.org/10.1002/mame.202400011

Cazin, I., Ocepek, M., Kecelj, J., Strazar, A. S., Schlögl, S. (04/2024). "Synthesis of Bio-Based Polyester Resins for Vat Photopolymerization 3D Printing", Materials, 17(8), 1890, DOI: https://doi.org/10.3390/ma17081890

Klingler, A., Reisinger, D., Schlögl, S., Wetzel, B., Breuer, U., Krüger, J. K. (04/2024). "Vitrimer Transition Phenomena from the Perspective of Thermal Volume Expansion and Shape (in) stability", Macromolecules, DOI: https://doi.org/10.1021/acs.macromol.4c00207

Jelinek, A., Rossegger, E., Schlögl, S., Kiener, D., Alfreider, M. (04/2024). "Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. untreated surfaces", Materials & Design, 112994, DOI: https://doi.org/10.1016/j.matdes.2024.112994

Bergoglio, M., Palazzo, G., Reisinger, D., Porcarello, M., Kortaberria, G., Schlögl, S., Sangermano, M. (04/2024). "Cationic UV curing of bio-based epoxidized castor oil vitrimers with electrically conductive properties", Reactive and Functional Polymers, https://doi.org/10.1016/j.reactfunctpolym.2024.105936

Schieppati, J., Gehling, T., Azevedo, M., Kerschbaumer, R. C., Christöfl, P., Oreski, G., Fasching, M. A., Schwarz, T., Pinter, G. (04/2024). "Investigation into the state of cure of elastomers through nanoindentation", Polymer Testing, Vol. 133, DOI: https://doi.org/10.1016/j.polymertesting.2024.108417

Peng, C., Tao, Q., Krivec, T., Casas, G., Latorre, S., Antretter, T., Macher, J., Fuchs, P. (04/2024). "Exploring the Impact of Laser Drilling on Material Thermal Decomposition: A Computational Study Using KratosMultiphysics", 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), pp 1 - 7, DOI: 10.1109/EuroSimE60745.2024.10491467.

Bandl, C., Kern, W., Ranz, M., Grabner, B. (04/2024). "Functionalization of PTFE substrates with quaternary ammonium groups - An approach towards anion conducting properties", Applied Surface Science 661, 160084 (2024), DOI: https://doi.org/10.1016/j.apsusc.2024.160084

Müller, M. W., Drusgala, M., Fischer, R. C., Kern, W., Haas, M., Bandl, C. (04/2024). "Nanoparticles bearing germanium based photoinitiators at their surface: Preparation and use in grafting-from photopolymeriszation reactions", Applied Surface Sceince 661, 160035 (2024), DOI: https//doi.org/10.10/j.apsusc.2024.160035

Theiler, G., Cano Murillo, N., Halder, K., Balasooriya, W., Hausberger, A., Kaiser, A. (03/2024). "Effect of high-pressure hydrogen environment on the physical and mechanical properties of elastomers", International Journal of Hydrogen Energy, Vol. 58, pp 389 - 399, DOI: 10.1016/j.ijhydene.2024.01.148

Grabmayer, T., Manhart, J., Fleischmann, D., Kaiser, S., Schaller, R., Holzner, A.,  Schlögl, S. (03/2024). "Dual cross‐linking of XNBR latex with epoxy‐functional calcium silicate particles for the production of accelerator‐free medical gloves", Journal of Applied Polymer Science, e55498, DOI: https://doi.org/10.1002/app.55498

Cazin, I., Plevová, K., Alabiso, W., Vidović, E., Schlögl, S. (03/2024). "Dual-Wavelength Vat Photopolymerization 3D Printing with Hybrid Acrylate-Epoxy Resins: Influence of Resin Composition on Microstructure and Mechanical Properties", Advanced Engineering Materials, https://doi.org/10.1002/adem.202301699

Höller, R., Hrbinič, K., Reisinger, D., Alabiso, W., Schuschnigg, St., Fleisch, M., Waly, C., Rossegger, E., Schlögl, S. (02/2024). "Rapid tooling for rubber extrusion molding by digital light processing 3D printing with dual curable vitrimers", Applied Materials, p e202300133, DOI: https://doi.org/10.1002/appl.202300133

Korotkov, R., Shutov, V., Orlov, A., Bornosuz, N., Kulemza, D., Onuchin, D., Shcherbina, A., Gorbunova, I., Sirotin, I. (02/2024). "The Kinetic Study of the Influence of Common Modifiers on the Curing Process of Epoxy Vitrimers", Polymers, Vol. 16, Issue 3, Art. Nr. 392, DOI: 10.3390/polym16030392

Balasooriya, W., Kaiser, A., Fasching, M., Hausberger, A., Schwarz, T., Pinter, G. (02/2024). "Characterization of fracture behavior under impact-like loading conditions of elastomeric grades for high-pressure gas application", Polymer, Vol. 294, Art. Nr. 126718, DOI: 10.1016/j.polymer.2024.126718

Malik, M. S., Wolfahrt, M., Pinter, G., Schlögl, S. (02/2024). "Redox cationic frontal polymerization: a rapid curing approach for carbon fiber-reinforced composites with high fiber content", Chemical Monthly, Vol. 155, pp 205 - 217, DOI: https://doi.org/10.1007/s00706-023-03168-y

Geier, J., Bredács, M., Witschnigg, A., Vollprecht, D., Oreski, G. (02/2024). "Analysis of different polypropylene waste bales: Evaluation of the source material for PP recycling", Waste Management & Research: The Journal for a Sustainable Circular Economy, Vol. "Special Issue", p 9, DOI: https://doi.org/10.1177/0734242X241227369

Wanghofer, F., Trausner, C., Reisinger, D., Wolfahrt, M., Schlögl, S. (01/2024). "Influence of Anion and Cation Structures on Ionic Liquid Epoxy-Based Vitrimers", ACS Applied Polymer Materials, Vol. 6, Issue 1, pp 649 - 657, DOI: 10.1021/acsapm.3c02293

Klingler, A., Gilberg, M., Reisinger, D., Schlögl, S., Wetzel, B., Krüger, J. K. (01/2024). "Thermal volume expansion as seen by Temperature-modulated optical refractometry, Oscillating dilatometry and Thermo-mechanical analysis", Polymer Testing, Vol. 131, pp 108340, DOI: https://doi.org/10.1016/j.polymertesting.2024.1.08340

 

2023

Barretta, C. Lindig, S., Bredács, M., Astigarraga, A., Helfer, E., Oreski, G. (12/2023). "Ageing Detection of Encapsulants and Backsheets in the Field via NIR Spectroscopy", Conference Record of the IEEE Photovoltaic Specialists Conference, DOI: 10.1109/PVSC48320.2023.10359783

Gehling, T., Kerschbaumer, R. C., Pinter, G., Fasching, M. A., Schwarz, T., Schieppati, J. (12/2023). "Investigating the impact of manufacturing conditions on crack growth rate in nitrile butadiene rubber for enhanced service life – Part 01", Results in Engineering, Vol. 20, Art. Nr. 101484, DOI: 10.1016/j.rineng.2023.101484

Aung, H. H., Li, D., Liu, J., Barretta, C., Sheng, Y., Jo, Y. J., Jimenez, J., C., Barcelos, E. I., Oreski, G., French, R. H., Bruckman, L. S. (12/2023). "Lifetime and Degradation Study of Poly(Methyl Methacrylate) via a Data-Driven Study Protocol Approach", Integrating Materials and Manufacturing Innovation, Vol. 12, Issue 4, pp 349 - 370, DOI: 10.1007/s40192-023-00322-6

Sölle, B., Shaukat, U., Rossegger, E., Schlögl, S. (12/2023). "Synthesis and Characterization of Bio-Based Transesterification Catalysts for Green 3D-Printable Dynamic Photopolymers", Polymer Chemistry, Vol 14, pp 4991 - 5003, DOI: https://doi.org/10.1039/D3PY00989K

Shaukat, U., Thalhamer, A., Rossegger, E., Schlögl, S. (12/2023). "Dual-vat photopolymerization 3D printing of vitrimers", Additive Manufacturing, Vol. 79, p 103930, DOI: https://doi.org/10.1016/j.addma.2023.103930

Alabiso, W., Li, Y., Brancart, J., Van Assche, G., Rossegger, E. Schlögl, S. (12/2023). "The use of a sulfonium-based photoacid generator in thiol-ene photopolymers for the controlled activation of transesterification through chemical amplification", Polymer Chemistry, DOI: https://doi.org/10.1039/D3PY01106B

Sangermano, M., Bergoglio, M., Schögl, S. (12/2023). "Biobased Vitrimeric Epoxy Networks", Macromolecular Materials and Engineering, DOI: https://doi.org/10.1002/mame.202300371

Malik, M. S., Wolfahrt, M., Pardo, J. J. D., Bublitz, D., Schlögl, S. (12/2023). "Prospects in the application of a frontally curable epoxy resin for cured-in-place-pipe rehabilitation", Journal of Applied Polymer Science, Vol. 141, Issue 9, e55024, DOI: https://doi.org/10.1002/app.55024

Kopp, D., Gleirscher, M., Stummer, M., Major, L., Hausberger, A., Schlögl, S., Lackner, J. M., Kaindl, R., Prethaler, T., Colcite, A. M., Waldhauser, W. (12/2023). "Ternary low-friction coatings on thermoplastics by plasma spraying: Investigations on the process-structure", Surface Coating and Technology, Vol. 477, p 130303, DOI: https://doi.org/10.1016/j.surfcoat.2023.130303

Traintinger M., Kerschbaumer R., Hornbachner M., Lechner B., Lucyshyn T. (11/2023). "Investigation on strategies for optimizing process definition in rubber processing: A study on mechanical and chemical properties of vulcanizates as basis for the development of a new calculation model for quality prediction", Journal of Applied Polymer Science, p 18, DOI: https://doi.org/10.1002/app.54901

Schweiger, M., Röper, F., Wolfahrt, M., Täsler, J., Schirmer, H., Salzmann, M., Feuchter, M., Resch-Fauster, K. (11/2023). "Tensile properties of flexible composites with knitted reinforcements from various yarn materials", Polymer Composites, DOI: https//doi.org/10.1002/pc.27942

Barretta C., Koinig G., Bredács M., Geier, J., Meinhart, L., Grath, E., Helfer, E., Oreski G. (10/2023). "Sorting of plastic packaging films, removal of multilayers and effects on properties of recyclates", Proceedings of Sardinia 2023, pp 4, ISBN: 9788862650335

Walluch, M., Kerschbaumer, R. C., Hornbachner, M. (10/2023). "Correlation of crosslinking degree and dynamic mechanical properties of rubber parts", AIP Conference Proceedings, Vol. 2884, Issue 1, Art. Nr. 130001, DOI: 10.1063/5.0169330

Wanghofer, F., Javanshour, F.,  Sarlin, S., Wolfahrt, M., Schlögl, S. (10/2023). "Delopment and optimization of graphene oxide filled epoxy composition for high toughness and gas barrier in liner-less type v hydrogen pressure vessels", Proceedings SAMPE Europe Conference 2023 Madrid, ISBN 978-90-829101-9-3

Malik, M.S., Wolfahrt, M., Schlögl, S. (10/2023). "Redox Cationic Frontal Polymerization: A new strategy towards fast and efficient curing of defect free fiber reinforced polymer composites", RSC Advances, Vol. 13, pp 28993 - 29003, DOI: 10.1039/d3ra05976f

Thalhamer, A., Fleisch, M., Schuecker, C., Fuchs , P., Schlögl, S., Berer, M. (10/2023). "A black-box optimization strategy for customizable global elastic deformation behavior of unit cell-based tri-anti-chiral metamaterials", Advances in Engineering Software, Vol. 186, DOI: https://doi.org/10.1016/j.advengsoft.2023.103553

Geier, J., Barretta, C., Hochrainer, N., Fink, T., Bredács, M., Oreski, G. (10/2023). "Polypropylene Recycling - how to improve the quality of PP recyclates", Proceedings SARDINIA 2023, pp 5

Resch-Fauster, K., Oreski, G. (09/2023). "31. Leobener Kunststoffkolloquium "Circular Thiniking in Polymer Technology", 31. Leobener Kunststoffkolloquium "Circular Thiniking in Polymer Technology", ISBN: 978-3-9519792-4-3

Travnicek, L., Poduska, J., Messiha, M., Arbeiter, F., Pinter, G., Nahlik, L., Hutar, P. (09/2023). "Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipes", Engineering Fracture Mechanics, Vol. 289, Article number 109423,  DOI: 10.1016/j.engfracmech.2023.109423

Brune, B., Ortner, I., Eder, G. C., Voronko, Y., Gassner, A., Berger, K. A., Oreski, G., Knöbl, K., Neumaier, L., Feichtner, M. (09/2023), "Connecting material degradation and power loss of PV modules using advanced statistical methodology", Solar Energy Materials and Solar Cells, Vol. 260, Article number 112485, DOI: 10.1016/j.solmat.2023.112485

Röper, F., Sommacal, S., Compston, P., Tauchner, J., Wolfahrt, M., Pinter, G. (09/2023). "Tension-after-impact (TAI) performance and 3D damage visualization of carbon-fiber epoxy composites with adhesively bonded patch repairs", Composite Structures, Vol. 322,Article number 117338, DOI: 10.1016/j.compstruct.2023.117338

Block, A., B., Barretta, C., Faes, A., Virtuani, A., Vlk, A., Ledinsky, M., Oreski, G., Ballif, C. (09/2023). "Stability of black interconnect coatings for solar photovoltaic module applications", Solar Cells, Vol. 262, Article number 112540, DOI: 10.1016/j.solmat.2023.112540

Wanghofer, F., Trausner, C., Reisinger, D., Wolfahrt, M., Schlögl, S. (09/2023), "Ionic liquid based vitrimers – effect of anion and cation on mechanical and self-healing properties", Proceedings 31st Leoben-Conference of Polymer Engineering & Science, ISBN 978-3-9519792-4-3 self-publishi

Hausberger, A., Pecora, M., Favier, D., Rossegger, E., Tockner, M., Ules, T., Haselmann, M., Schlögl, S., Gauthier, C. (09/2023). "In Situ Observation of Micro-Patterned Elastomeric Surfaces: The Formation of the Area of Real Contact and the Influence on Its Friction and Deformation Behaviour", Materials, Vol. 16, p 6489, DOI: https://doi.org/10.3390/ma16196489

Alabiso, W., Sölle, B., Reisinger, D., Guedes de la Cruz, G., Schmallegger, M., Griesser, T., Rossegger, E., Schlögl, S. (09/2023). "On-demand Activation of Transesterification via Chemical Amplification in Dynamic Thiol-ene Photopolymers", Angewandte Chemie International Edition, p e202311341, DOI: https://doi.org/10.1002/anie.202311341

Alabiso, W., Sölle, B., Reisinger, D., Guedes de la Cruz, G., Schmallegger, M., Griesser, T., Rossegger, E., Schlögl, S. (09/2023). "Bedarfsorientierte Aktivierung der Umesterungsreaktionen durch chemische Verstärkung in dynamischen Thiol-en Photopolymeren", Angewandte Chemie, p e202311341, DOI: https://doi.org/10.1002/ange.202311341

Nicolay, P., Schlögl, S., Thaler, S. M., Humbert, C., Filipitsch, B. (08/2023). "Smart Materials for Green (er) Cities, a Short Review", Applied Sciences, Vol. 13(16), p 9289, DOI: https://doi.org/10.3390/app13169289

Rezvan, A., Sharifikolouei, E., Soprunyuk, V., Schranz, W., Todt, J., Lassnig, A., Gammer, C., Sifferlinger, N., A., Asci, A., Okulov, I., Schlögl, S., Keckes, J. (08/2023). "Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material", Materials and Design, Vol. 223, p 112256, DOI: https://doi.org/10.1016/j.matdes.2023.112256

Mühleisen W., Yan D., Wolf T., Grinschgl M., Kasinikota V., La, M. (08/2023). "In-Line Monitoring of a Curing Process With a Multisensor Concept", IEEE Sensor Letters, Vol. 7, issue 9, pp 2475-1472, DOI: https://doi.org/10.1109/LSENS.2023.3307094

Pommer, R., Saf, R., Supplit, R., Holzner, A., Plank, H., Trimmel, G. (08/2023). "Thermally-triggered multi-shape-memory behavior of binary blends of cross-linked EPDM with various thermoplastic polyethylenes and their potential applications as temperature indicators", Polymer, Vol. 284, p 126302, DOI: 10.1016/j.polymer.2023.126302

Ules, T., Grießer, M., Hausberger, A., Schipfer, C., Mohammad M., Fuchs P., Schlögl, S., Gruber, D. P. (07/2023). "Tactile friction and perception of UV-curable coatings and their relation to physical surface parameters and contact mechanic simulation", Journal of Coatings Technology and Research, DOI: https://doi.org/10.1007/s11998-023-00792-5

Hable, A., Matore, M., Scherr, A., Krivec, T., Gruber, D. P. (07/2023). "Detection of Printed Circuit Board Defects with Photometric Stereo and Convolutional Neural Networks", WSCG 2023 Computer Science Research Notes, Vol. CSRN 3301, pp 300 - 305, DOI: 10.24132/CSRN.3301.92

Wanghofer, F., Wolfberger, A., Oreski, G., Neumaier, L., Schlögl, S. (07/2023). "Investigation of expandable fillers for reversible adhesive bonding in photovoltaic modules", International Journal of Adhesion and Adhesives, Vol. 126, pp 103454, DOI: https://doi.org/10.1016/j.ijadhadh.2023.103454

Schwaiger, M., Waly, C., Huszar, M., Oreski, G., Feuchter, M., Arbeiter, F., Resch-Fauster, K. (07/2023). "Bioinspired fracture toughness enhancement of a fully bio-based epoxy resin", Polymer Testing, Vol. 124, pp 1 - 10, DOI: doi.org/10.1016/j.polymertesting.2023.108098

Krassnig, P.J., Haselmann, M., Gruber, D. P. (06/2023). "Inspection approach for automated
in-line defect detection on decorated foil plates", Conference Proceedings -
4th International Conference on Advances in Signal Processing and Artificial Intelligence (ASPAI' 2022), e-ISBN: 978-84-09-45050-3

Jafari-Tabrizi, A., Ules, T., Grießer, M., Tranchida, D., Gruber, D. P. (06/2023). "A robot-based measurement setup for tactile surface classification", ASPAI' 2023 Conference Proceedings, pp 175 - 158

Lindig, S., Ascencio-Vásquez, J., Leloux, J., Moser, D., Aghaei, M., Fairbrother, A., Gok, A., Ahmad, S., Kazim, S., Lobato, K., Van Sark, W.J.G.H.M, Pearsall, N., Burduhos, B.G., Raghoebarsing, A., Oreski, G., Schmitz, J., Theelen, M., Yilmaz, P., Kettle, J. (06/2023). "Performance and Degradation in Silicon PV Systems Under Outdoor Conditions in Relation to Reliability Aspects of Silicon PV Modules - Summary of Results of COST Action PEARL PV", Conference Record of IEEE Photovoltaic Specialists Conference, DOI: 10.1109/PVSC48320.2023.10359742

Barretta, C., Meinhart, L., Krebs, H., Brandstätter, A., Oreski, G. (06/2023). "Damp Heat Exposure of Glass/Glass Coupons with Different Encapsulants", Conference Record of IEEE Photovoltaic Specialists Conference, DOI: 10.1109/PVSC48320.2023.10359598

Reisinger, D., Kriehuber, M. U., Bender, M., Bautista-Anguis, D., Rieger, B., Schlögl, S. (06/2023). "Thermally Latent Bases in Dynamic Covalent Polymer Networks and their Emerging Applications", Advanced  Materials,  Vol. 35, DOI: 10.1002/adma.202300830

Reisinger, D., Hellmayr, A., Paris, M., Haas, M., Griesser, T., Schlögl. S. (06/2023). "Spatially resolved photoactivation of dynamic exchange reactions in 3D-printed thiol-ene vitrimers", Polymer Chemistry, Vol. 14, pp 3082 - 3090, DOI: 10.1039/d3py00377a

Raguz, I., Berer, M., Fleisch, M., Holzer, C., Brancart, J., Vanderborght, B., Schlögl, S. (06/2023). "Soft dielectric actuator produced by multi-material fused filament fabrication 3D printing", Polymers for Advanced Technologies, Vol. 34, pp 1967 - 1978, DOI: 10.1002/pat.6024

Kashef Tabrizian, S., Alabiso, W., Shaukat, U., Terryn, S., Rossegger, E., Brancart, J., Legrand, J., Schlögl, S., Vanderborght, B. (06/2023). "Vitrimeric shape memory polymer-based fingertips for adaptive grasping", Frontiers in Robotics and AI, Vol. 10, DOI: 10.3389/frobt.2023.1206579

Bijalwan, V., Rana, S., Yun, G. J., Singh, K. P., Jamil, M., Schlögl, S. (06/2023). "3D Printing of Covalent Adaptable Networks: Overview, Applications and Future Prospects", Polymer Reviews, DOI: 10.1080/15583724.2023.2227692

Polyak, P., Mackei, F., Toth, A., Bredacs, M. (06/2023). "Estimation of the Mechanical Properties of Poly(3-hydroxybutyrate) from IR Data", Journal of Polymers and the Environment, DOI: 10.1007/s10924-023-02934-7

Cazin, I., Rossegger, E., Roppolo, I., Sangermano, M., Granitzer, P., Rumpf, K., Schlögl, S. (06/2023). "Digital light processing 3D printing of dynamic magneto-responsive thiol-acrylate composites", RSC Advances, Vol. 13, pp 17536-17544, DOI:  10.1039/D3RA02504G

Oreski, G., Barretta, C., Macher, A., Eder, G., Neumayer, L., Feichtner, M., Aarnio-Winterhof, M. (06/2023). "Investigation of the crack propensity of co-extruded polypropylene backsheet films for photovoltaic modules", Solar Energy Materials & Solar Cells, Vol. 259, DOI: https://doi.org/10.1016/j.solmat.2023.112438

Rossegger, E., Shaukat, U., Moazzen, K., Fleisch, M., Berer, M., Schlögl, S. (06/2023). "The role of photolatent catalysts on the exchange kinetics of dual-wavelength 3D printable and photopatternable thiol-click vitrimers", Polymer Chemistry, Vol 14, pp 2640 - 2651, DOI: https://doi.org/10.1039/D3PY00333G

 Bredács, M., Geier, J., Barretta, C., Horvath, R., Geiser, M., Nader, K., Oreski, G., Gergely, S. (06/2023). "Towards circular plastics: Density and MFR prediction of PE with IR spectroscopic techniques", Poylmer Testing, Vol. 124, DOI: https://doi.org/10.1016/j.polymertesting.2023.108094

Muller, M. Drusgala, M., Fischer, R. C., Torvisco, A., Kern, W., Haas, M., Bandl, C. (06/2023). "Surface-Initiated Polymerizations Mediated by Novel Germanium-Based Photoinitiators", ACS Applied Materials & Interfaces; DOI: 10.1021/acsami.3c05528

Oreski, G., Ottersböck, B., Barretta, C., Christöfl, P., Radl, S. Pinter, G. (06/2023). "Degradation of PET – Quantitative estimation of changes in molar mass using mechanical and thermal characterization methods", Polymer Testing, Vol. 125, DOI: https://doi.org/10.1016/j.polymertesting.2023.108130

Fleisch, M., Thalhamer, A., Meier, G., Huber, P., A., F., Fuchs, P., F., Pinter, G.,  Schlögl, S., Berer, M. (06/2023). "Chiral-based mechanical metamaterial with tunable normal-strain shear coupling effect", Engineering Structures, Vol. 284, pp 15, DOI: 10.1016/j.engstruct.2023.115952

Rossegger, E., Shaukat, U., Moazzen, K., Fleisch, M., Berer, M., Schlögl, S. (05/2023). "The effect of photolatent catalysts on the exchange kinetics of dual-wavelength 3D printable and photopatternable thiol-click vitrimers", Polymer Chemistriy, Vol. 14, pp 2640 - 2651, DOI: 10.1039/d3py00333g

Bautista-Anguis, D., Wolfberger, A., Rabe, M., Tomaszcyk, S., Schlögl, S. (05/2023). "Implementation of thermo-responsive polymer coatings for an early warning against critical temperature states of thermo-sensitive electronic devices with metal oxide (MOx) gas sensors", Progress in Organic Coatings, Vol. 178, DOI: 10.1016/j.porgcoat.2023.107444

Azevedo, M., Monks, A.-M., Kerschbaumer, R.C., Schlögl, S., Saalwächter, K., Walluch, M., Consolati, G., Holzer, C. (05/2023). "Peroxide-based crosslinking of solid silicone rubber, part II: the counter-intuitive influence of dicumylperoxide concentration on crosslink effectiveness and related network structure", J. Applied Polymer Science, Vol. e54111, pp 001 - 017, DOI: 10.1002/app.54111

Jafari-Tabrizi, A.  Gruber, D. P.,  Gams, A. (05/2023). "Modification and Optimization of the Trajectory of an Industrial Robot to Scan a 3D-Surface for Quality Inspection", Advances in Service and Industrial Robotics. RAAD 2023, Vol. 135, pp 223 - 341, DOI: 10.1007/978-3-031-32606-6_39

Christöfl, P., Jakes, J.E., Geier, J., Pinter, G., Oreski, G., Stone, D.,  Teichert, C. (04/2023). "Improved NI methods for polymer based multilayer film cross- sections", IEEE, pp 1- 8, DOI: doi: 10.1109/EuroSimE56861.2023.10100815

Weninger, M., Zundel, J., Krivec. T., Rewein, M., Waschnig, S., Fuchs, P., Obst, C. (04(2023). "Evaluation of thermomechanical behavior of electronic devices through the use of a reduced order modelling approach", EuroSimE 2023, Graz, ISBN: 979-835034597-1, DOI: 10.1109/EuroSimE56861.2023.10100800

Lang, M., Oreski, G., Helfer, E., Fuchs, P., Halm, A., Klenk, M. (04/2023). "FEM simulation of influence of different polymeric module materials and layouts on thermomechanical deformations in strings of shingled solar cells", EuroSimE 2023, ISBN: 979-835034597-1, DOI: 10.1109/EuroSimE56861.2023.10100805

Thalhamer, A., Rossegger, E., Hasil, S., Hrbinic, K., Feigl, V., Pfost, M.,  Fuchs, P. (04/2023). "Thermomechanical and Electrical Material Characterization for a DLP Printing Process Simulation of Electrically Conductive Parts", 2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), pp. 1 - 10, DOI:10.1109/EuroSimE56861.2023.10100754

Grabmayer, T., Manhart, J., Kaiser, S., Schaller, R., Holzner, A., Schlögl, S. (04/2023). "Crosslinking of XNBR latex with multifunctional epoxides: An energy-efficient curing strategy for the fabrication of accelerator-free rubber gloves", Journal of Applied Polymer Science, Vol. 140, p e53973, DOI:  https://doi.org/10.1002/app.53973

Bredács, M., Kanatschnig, E., Frank, A., Oreski, G., Pinter, G., Gergely, S. (03/2023). "Identifying active and degraded phenolic antioxidants in aged PE with IR-microscopy", Polymer Degradation and Stability, 212, art. no. 110345, 2023.
https://doi.org/10.1016/j.polymdegradstab.2023.110345

Schaschnig, M. M., Duy, R., Todt, M., Pettermann, H. E. (03/2023). "Simulations of the snap-through behavior of a fiber reinforced elastomer structure for the design of a simple clamping mechanism", PAMM, Proceedings in Applied Mathematics and Mechanics, Section 4, DOI: https://doi.org/10.1002/pamm.202200075

Hinczica J., Messiha M., Koch T., Frank A., Pinter G. (03/2023). "Influence of Recyclates on Mechanical Properties and Lifetime Performance of Polypropylene Materials", Procedia Structural Integrity, Vol. 42, pp 8, 139-146, DOI 10.1016/j.prostr.2022.12.017

Gleirscher, M., Wolfberger, A., Schlögl, S., Holynska, M., Hausberger, A. (02/2023). "Accelerated Thermo-Catalytic Degradation of Perfluoropolyether (PFPE) Lubricants for Space Applications", Lubricants, 11 (2), art. no. 81, (2023), https://doi.org/10.3390/lubricants11020081

Bergoglio, M., Reisinger, D., Schlögl, S., Griesser, T., Sangermano, M. (02/2023). "Sustainable Bio-Based UV-Cured Epoxy Vitrimer from Castor Oil", Polymers, Vol. 15, DOI: 10.3390/polym15041024

Gobetti, A., Cornacchia, G., Petrogalli, C., Kerschbaumer, R.C., La Monica, M., Ramorino, G. (01/2023). "Characterization of recycled end-of-life rubber tire filled with black slag", Journal of Reinforced Plastics and Composites, (2023). https://doi.org/10.1177/07316844231155398

Gehling, T., Schieppati, J., Balasooriy, W., Kerschbaumer, R.C., Pinter, G. (01/2023). "Fatigue Behavior of Elastomeric Components: A Review of the Key Factors of Rubber Formulation, Manufacturing, and Service Conditions", Polymer Reviews, pp 42, DOI: 10.1080/15583724.2023.2166955

2022

Hable, A., Tabatabai, P.,  Lichtenegger, L. H., Scherr, A., Krivec, T., Gruber, P. D. (12/2022). "Detection of Printed Circuit Board Defects on ENIG and ENIPIG Surface Finishes with Convolutional Neural Networks and Evaluation of Training Parameter", Journal of Microelectronics and Electronic Packaging, Vol. 19 (4), pp 123 - 130, DOI: 10.4071/001c.57717

Drvoderic, M., Gfrerrer, M., Wiener, J., Pinter, G., Pletz, M., Schuecker, C. (12/2022). "Comparing crack density and dissipated energy as measures for off-axis damage in composite laminates", International Journal of Fatigue, Vol. 169, pp 1 - 10, DOI: https://doi.org/10.1016/j.ijfatigue.2022.107486

Kettle, J., Aghaei, M., Ahmad, S., Fairbrother, A., Irvine, S., Jacobsson, J. J., Kazim, S., Kazukauskas, V., Lamb, D., Lobato, K., Mousdis, G. A., Oreski, G. (12/2022). "Review of technology specific degradation in crystalline silicon, cadmium telluride, copper indium gallium selenide, dye sensitised, organic and perovskite solar cells in photovoltaic modules: Understanding how reliability improvements in mature technologies can enhance emerging technologies", Progress in Photovoltaics: Research an Applications, Vol. 30, Issue 12, pp 1365 - 1392, DOI: 10.1002/pip.3577

Rossegger, E., Li, Y., Frommwald, H., Schlögl, S. (12/2022). "Vat photopolymerization 3D printing with light-responsive thiol-norbornene photopolymers", Chemical Monthly, pp 1-8, https://doi.org/10.1007/s00706-022-03016-5

Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q., Schingale, A. (12/2022). "Towards virtually optimized curing cycles for polymericen capsulations in microelectronics", Microelectronics Reliability, Vol. 139, DOI: 10.1016/j.microrel.2022.114799

Sharma, H., Rana, S., Singha, P., Hayashi, M., Binder, W. H., Rossegger, E, Kumar, A., Schlögl, S. (12/2022). "Self-healable fiber-reinforced vitrimer composites: overview and future prospects", RSC Advances, 12(50), pp 13, 32569-32582, https://doi.org/10.1039/D2RA05103F

Shaukat, U., Rossegger, E., Rand, S., Schlögl, S. (12/2022). "Vat Photopolymerization 3D-Printing of Dynamic Thiol-Acrylate Photopolymers Using Bio-Derived Building Blocks", Polymers, Vol. 14(24), pp 5377, https://doi.org/10.3390/polym14245377

Dertnig, C., Guedes de la Cruz, G., Neshchadin, D., Schlögl, S., Griesser, T. (11/2022). "Blocked Phosphates as Photolatent Catalysts for Dynamic Photopolymer Networks", Angewandte Chemie, https://doi.org/10.1002/ange.202215525

Lang, M., Oreski, G., Helfer, E., Halm, A., Klenk, M., Fuchs, P. (11/2022). "FEM simulation of deformations and stresses in strings of shingled solar cells under mechanical and thermal loading", AIP Conference Proceedings, Vol. 2709, p 020008, DOI: https://doi.org/10.1063/5.0126221

Li, Y., Shaukat, U., Schlögl, S., Xue, T., Li, J., Nie, J., Zhu, X. (11/2022). "A pyrrole–carbazole photoinitiator for radical and cationic visible light LED photopolymerization", European Polymer Journal, Vol. 182, p 111700, https://doi.org/10.1016/j.eurpolymj.2022.111700

Müller, S. M., Schlögl, S., Wiesner, T., Haas, M., Griesser, T. (11/2022). "Recent Advances in Type I Photoinitiators for Visible Light Induced Photopolymerization", ChemPhotoChem, pp14, https://doi.org/10.1002/cptc.202200091

Azevedo, M., Monks, A.M., Kerschbaumer, R.C., Schlögl, S., Holzer, C. (10/2022). "Peroxide-Based Crosslinking of Solid Silicone Rubber, Part I: Insights into the Influence of Dicumylperoxide Concentration on the Curing Kinetics and Thermodynamics Determined by a Rheological Approach", MDPI Polymers, Vol. 14, P 22, pp 4404, https://doi.org/10.3390/polym14204404

Stiller, T., Berer, M., Katta, A. D. K., Haar, B., Truszkiewicz, E., Kraschitzer, W., Stepanovsky, H., Pinter, G., Lackner, J. M. (10/2022). "Powder ageing of Polyamide 6 in laser sintering and its effects on powder and component characteristics", Additive Manufacturing, Vol. 58, DOI: 10.1016/j.addma.2022.102987

Volpe, V., Speranza, V., Schrank, T., Berer, M., Pantani, R. (10/2022). "An investigation of crystallization kinetics of polyoxymethylene in processing conditions", Polymers for Advanced Technologies, Volume 43, Issue 2, DOI: 10.1002/pat.5916

Brune B., Ortner I., Eder G., Voronko Y., Oreski G., Berger K., Knöbl K., Neumaier L., Feichtner M. (10/2022). "Quantifying the influence of encapsulant and backsheet composition on PV-module power and electrical degradation", Progress in Photovoltaics: Research and Applications, DOI: 10.1002/pip.3679

Aminabadi, S. S., Tabatabai, P., Steiner, A., Gruber, D. P., Friesenbichler, W., Habersohn, C., Berger-Weber, G. (09/2022). "Industry 4.0 In-Line AI Quality Control of Plastic Injection Molded Parts", Polymers, Vol. 14, Issue 17: DOI: 10.3390/polym14173551

Cazin, I., Gleirscher, M. O., Fleisch, M., Berer, M., Sangermano, M., Schlögl, S. (09/2022). "Spatially controlling the mechanical properties of 3D printed objects by dual-wavelength vat photopolymerization", Additive Manufacturing, Vol. 57, pp 9, https://doi.org/10.1016/j.addma.2022.102977

Koinig, G., Grath, E., Barretta, C., Friedrich, K., Vollprecht, D., Oreski, G. (09/2022). "Lifecycle Assessment for Recycling Processes of Monolayer and Multilayer Films: A Comparison", Polymers, Vol. 14, pp 35, https://doi.org/10.3390/polym14173620

Rossegger, E., Strasser, J., Höller, R., Fleisch, M., Berer, M., Schlögl, S. (09/2022). "Wavelength Selective Multi-Material 3D Printing of Soft Active Devices Using Orthogonal Photoreactions", Macromolecular Rapid Communications, pp 9, https://doi.org/10.1002/adem.202200749

Wanghofer, F., Wolfberger, A., Oreski, G., Schlögl, S., Neumaier, L. (09/2022). "Assessment of Epoxy Functionalized Poly(dimethylsiloxane) Vitrimers Catalyzed with Covalently Attached Amines as Reversible Adhesives", Macromolecular Materials and Engineering, pp 9, https://doi.org/10.1002/mame.202200237

Rossegger, E., Höller, R., Hrbinic, K., Sangermano, M., Griesser, T., Schlögl, S. (09/2022). "3D printing of soft magneto-active devices with thiol-click photopolymer composites", Advanced Engineering Materials, pp 2200749, DOI: https://doi.org/10.1002/adem.202200749

Koinig, G., Kuhn, N., Barretta, C., Friedrich, K., Vollprecht, D. (09/2022). "Evaluation of Improvements in the Separation of Monolayer and Multilayer Films via Measurements in Transflection and Application of Machine Learning Approaches", Veröffentlichung, Polymers, Vol. 14, pp 28, https://doi.org/10.3390/polym14193926

Macher, J., Golestaneh, P., Macher, A. E., Morak, M., Hausberger, A. (08/2022). "Filler Models Revisited: Extension of the Nielson Model with Respect to the Geometric Arrangements of Fillers", Polymers, Vol. 14, DOI: 10.3390/polym14163327

Rossegger, E., Yang, L., Frommwald, H., Schlögl, S. (08/2022). "Vat photopolymerization 3D printing with light-responsive thiol-norbornene photopolymers", Chemical Monthly, pp 8, https://doi.org/10.1007/s00706-022-03016-5

Saeidi Aminabadi, S., Jafari-Tabrizi, A., Gruber, D.P., Berger-Weber, G., Friesenbichler, W. (08/2022). "An Automatic, Contactless, High-Precision, High-Speed Measurement System to Provide In-Line, As-Molded Three-Dimensional Measurements of a Curved-Shape Injection-Molded Part", Technologies, 10 (4), art. no. 95, (2022), https://doi.org/10.3390/technologies10040095

Oreski, G., Stein, J. S., Eder, G. C., Berger, K., Bruckman, L., French, R., Vedde, J., Weiß, K. A. (07/2022). "Motivation, benefits, and challenges for new photovoltaic material & module developments", Progress in Energy, Vol. 4, DOI: 10.1088/2516-1083/ac6f3f

Stiller, T., Hausberger, A., Berer, M., Schwan, A.M., Hinterer, A., Spalt, S., Pinter, G., Lackner, J.M. (07/2022). "Determination of Cyclic Load Limits for Plasma-Sprayed Copper Tracks on Material Extrusion-Based Printed Surfaces", Advanced Engineering Materials, (2022), https://doi.org/10.1002/adem.202200567

Belei, C., Pommer, R., Amancio-Filho, S.T. (06/2022). "Optimization of additive manufacturing for the production of short carbon fiber-reinforced polyamide/Ti-6Al-4V hybrid parts", Materials & Design, Volume 219, pp 17, doi.org/10.1016/j.matdes.2022.110776

Fleisch, M., Thalhamer, A., Meier, G., Fuchs, P., Pinter, G., Schlögl, S., Berer, M. (06/2022). "Asymmetric chiral and antichiral mechanical metamaterials with tunable Poisson's ratio", APL Materials, Vol. 10, pp 17, DOI 10.1063/5.0091756

Ottersböck, B., Oreski, G., Pinter, G., (06/2022). "How to accelerate natural weathering of polymeric photovoltaic backsheets – A comparison with standardized artificial aging", Solar Energy Materials and Solar Cells, Vol. 244, pp 7, https://doi.org/10.1016/j.solmat.2022.111819

Shaukat, U., Rossegger, E., & Schlögl, S. (06/2022). "A Review of Multi-Material 3D Printing of Functional Materials via Vat Photopolymerization", Polymers, Vol. 14, pp 69, 2449, DOI: https://doi.org/10.3390/polym14122449

Song, R., Morak, M., Muliana, A. (06/2022). "A Thermo-viscoelastic Model of Anisotropic Polyamide Glass Fiber Composites", Composite Structures, Vol. 296, pp 26, DOI: 10.1016/j.compstruct.2022.115850

Koinig, G., Friedrich, K., Rutrecht, B., Oreski, G., Barretta, C., Vollprecht D. (05/2022). "Influence of reflective materials, emitter intensity and foil thickness on the variability of nearinfrared spectra of 2D plastic packaging materials", Waste Management, Vol.144, pp 9, 543-551, https://doi.org/10.1016/j.wasman.2021.12.019

Lang, M., Hirner, S., Wiesbrock, F., Fuchs, P. (05/2022). "A Review on Modeling Cure Kinetics and Mechanisms of Photopolymerization", Polymers 2022, Vol. 14, pp 60, https://doi.org/10.3390/polym14102074

Mansouri, M.R. , Fuchs, P.F. , Baghani, M., Schuecker, C. (05/2022). "Matrix–fiber interfacial debonding in soft composite materials: Cyclically behavior modeling and microstructural evolution", Composites Part B, Volume 237, pp 12, https://doi.org/10.1016/j.compositesb.2022.109853

Schieppati, J. (05/2022). "Fatigue Analysis and Defect Size Evaluation of Filled NBR including Temperature Influence", Materials, Vol. 15 (11), pp 23, 3745-3768, https://doi.org/10.3390/ma15113745

Christöfl, P., Ottersböck, B., Czibula, C., Macher, A., Teichert, C., Pinter, G., Oreski, G. (04/2022). "Nanoindentation for fast investigation of PET film degradation", JOM, 30 years of Oliver&Pharr, Vol. 74, pp 8, 2287-2294, https://doi.org/10.1007/s11837-022-05278-0

Koinig, G., Rutrecht, B., Friedrich, K., Barretta, C., Vollprecht, D. (04/2022). "Latent Recycling Potential of Multilayer Films in Austrian Waste Management", Polymers, Vol. 14, pp15, https://doi.org/10.3390/polym14081553

Oreski, G., Pinter, G. (04/2022). "Peeling of Flexible Laminates—Determination of Interlayer Adhesion of Backsheet Laminates Used for Photovoltaic Modules", materials, Special Issue Fracture Mechanics Investigation of Polymeric Materials, pp 11, https://doi.org/10.3390/ma15093294

Karekar, A., Pommer, R., Prem, B., Czibula, C., Teichert, C., Trimmel, G., Saalwächter, K. (03/2022). "NMR-based cross-link densities in EPDM and EPDM/ULDPE blend materials and correlation with mechanical properties", Macromolecular Materials and Engineering, Volume 2022, pp 16, doi.org/10.1002/mame.202100968

Reisinger, D., Dietliker, K., Sangermano, M., Schlögl, S. (03/2022). "Streamlined concept towards spatially resolved photoactivation of dynamic transesterification in vitrimeric polymers by applying thermally stable photolatent bases", Polymer Chemistry, Volume 13, Issue 9, Pages 1169 - 11767

Schrank, T., Berer, M., Haar, B., Ramoa, B., Lucyshyn, T., Feuchter, M., Pinter, G., Speranza, V., Pantani, R. (03/2022). "Injection molding simulation of Polyoxymethylene using crystallization kinetics data and comparison with the experimental process", Polymer Crystallization, Vol. 2022, pp 1-15, https://doi.org/10.1155/2022/2387752

Song, R., Berer, M., Muliana, A. (03/2022). "Mechanical responses of Semi-crystalline thermoplastic polymers at various temperatures", International Journal of Solids and Structures, Volume 238, pp 21, DOI 10.1016/j.ijsolstr.2021.111398

Aghaei, M., Fairbrother, A., Gok, A., Ahmad, S., Kazin, S., Lobato, K., Oreski, G., Reinders, A., Theelen, M., Yilmaz, P., Kettle, J. (02/2022). "Review of degradation and failure phenomena in photovoltaic modules", Renewable and Sustainable Energy Reviews, Vol. 159, pp 18, https://doi.org/10.1016/j.rser.2022.112160

Malik., M. S., Wolfahrt, M., Sangermano, M., Schlögl, S. (02/2022). "Effect of a Dicycloaliphatic Epoxide on the Thermo-Mechanical Properties of Alkyl, Aryl Epoxide Monomers Cured via UV-Induced Cationic Frontal Polymerization", Macromolecular Materials and Engineering, Vol. 2100976, pp 1-10, DOI: 10.1002/mame.202100976

Müller, M., Bandl, Ch., Kern, W. (02/2022). "Surface-Immobilized Photoinitiators for Light Induced Polymerization and Coupling Reactions", Polymers, Vol. (14)608, pp 49, DOI: https://doi.org/10.3390/polym14030608

Stadler, G., Primetzhofer, A., Pinter, G., Grün, F. (02/2022). "Evaluation and consideration of local specimen material properties in lifetime prediction of short fiber-reinforced PA6T/6I", Fatigue and Fracture of Engineering Materials, Vol. 4, pp 10, https://doi.org/10.1111/ffe.13634

Strohmeier, L., Balasooriya, W., Schrittesser, B., van Duin, M., Schlögl, S. (02/2022). "Hybrid In Situ Reinforcement of EPDM Rubber Compounds Based on Phenolic Novolac Resin and Ionic Coagent", Applied Sciences (Switzerland), Volume 12, Issue 5, March-1 2022, Article number 2432, https://doi.org/10.3390/app12052432

2021

Drvoderic, M., Pletz, M., Schuecker, C. (12/2021). "Modeling Stiffness Degradation of Fiber-Reinforced Polymers Based on Crack Densities Observed in Off-Axis Plies", Journal of Composite Science, Vol. 6, DOI: 10.3390/jcs6010010

Messiha, M., Frank, A., Arbeiter, F., Pinter, G. (12/2021). "How hydrogen bonds influence the slow crack growth resistance of polyamide 12", Polymer, Volume 23917, DOI: 10.1016/j.polymer.2021.124437.

Messiha, M., Frank, A., Heimink, J., Arbeiter, F., Pinter, G. (12/2021). "Mechanisms of rapid fracture in PA12 grades", Theoretical and Applied Fracture Mechanics, Volume 117, DOI: 10.1016/j.tafmec.2021.103145

Messiha, M., Frank, A., Heimink, J., Arbeiter, F., Pinter, G. (12/2021). "Structure-property relationships of polyamide 12 grades exposed to rapid crack extension", Materials, Volume 14, Issue 19, DOI10.3390/ma14195899

Bredács, M., Barretta, C., Castillon, L. F., Frank, A., Oreski, G., Pinter, G., Gergely, S. (11/2021). "Prediction of polyethylene density from FTIR and Raman spectroscopy using multivariate data analysis", Elsevier, Vol. 104, pp 107406, DOI: 10.1016/j.polymertesting.2021.107406

Wanghofer, F., Wolfberger, A., Wolfahrt, M., Schlögl, S. (11/2021). "Cross-Linking and Evaluation of the Thermo-Mechanical Behavior of Epoxy Based Poly(ionic Liquid) Thermosets",Polymers 13 (22): 3914, DOI: 10.3390/polym13223914

Khudiakova, A., Brunner, A.J., Wolfahrt, M., Wettemann, T., Godec, D., Pinter, G. (10/2021). "On the investigation of quasi-static crack resistance of thermoplastic tape layered composites with multiple delaminations: Approaches for quantification", Composites Part A: Applied Science and Manufacturing, Volume 149, DOI:,10.1016/j.compositesa.2021.106484

Tabatabai, P., Gruber, D.P. (10/2021). "Knights and liars on graphs", Journal of Integer Sequences, Volume 24, Issue 52021, Article number 21.5.8

Todorovic, A., Blößl, Y., Oreski, G., Resch-Fauster, K. (10/2021). "High-performance composite with 100% bio-based carbon content produced from epoxidized linseed oil, citric acid and flax fiber reinforcement", Composites Part A: Applied Science and Manufacturing, Vol. 152, pp 10666, DOI: https://doi.org/10.1016/j.compositesa.2021.106666

Ules, T., Haselmann, M., Grießer, M., Gruber, D.P. (10/2021). "Finger Contact Area Analysis with Convolutional Neural Networks", Applied Artificial Intelligence, DOI: 0.1080/08839514.2021.1987035

Alabiso, W., Hron, T. M., Reisinger, D., Bautista Anguís, D., Schlögl, S. (09/2021). "Shape memory-assisted self-healing of dynamic thiol-acrylate networks", Polymer Chemistry, Vol. 12, pp 11, pp 5704 – 5714, https://doi.org/10.1039/D1PY00925G

Christoefl, P.,Czibula, C., Seidlhofer, T., Berer, M., Macher, A., Helfer, E., Schrank, T., Oreski, G., Teichert, C., Pinter, G. (09/2021), "Morphological characterization of semi-crystalline POM using nanoindentation", International Journal of Polymer Analysis and Characteriazation, Vol. 26, pp 692 - 706, DOI: 10.1080/1023666X.2021.1968122

Fleisch, M., Thalhamer, A., Meier, G., Raguz, I., Fuchs, P., Pinter, G., Schlögl, S., Berer, M. (09/2021). "Functional mechanical metamaterial with independently tunable stiffness in the three spatial directions", Materials Today Advances, Vol. 11, pp 13, DOI: 0.1016/j.mtadv.2021.100155

Hausberger, A., Stiller, T., Kappl, C., Hensgen, L., Grün, F. (09/2021). "Improving the tribological properties of technical polymers with metal sulphide compounds", "Lubricants, Volume 9, Issue 9, DOI1 0.3390/lubricants9090090

Plesa, I., Radl, S., Schichler, U., Ramsauer, F., Ladstätter, W., Bergmann, I., Kern, W., Schlögl, S. (09/2021). "Influence of morphology and chemical surface composition on electrical conductivity of SiC microspheres", Surface Science, Vol. 715, pp 1, doi.org/10.1016/j.susc.2021.121942

Schieppati, J., Schrittesser, B., Wondracek, A., Robin, S., Holzner, A., Pinter, G. (09/2021). "Effect of mechanical loading history on fatigue crack growth of non-crystallizing rubber", Engineering Fracture Mechanics, Vol. 257, pp 13, https://doi.org/10.1016/j.engfracmech.2021.108010

Truszkiewicz, E., Thalhamer, A., Rossegger, M., Vetter, M., Meier, G., Rossegger, E., Fuchs, P., Schlögl, D., Berer, M. (09/2021). "Mechanical behavior of 3D-printed polymeric metamaterials for lightweight applications", Journal of Applied Polymer Science, Vol. 139 (6), pp 12, DOI: https://doi.org/10.1002/app.51618

Voronko, Y., Eder G.C., Breitwieser, C., Mühleisen, W., Neumaier, L., Feldbacher, S., Oreski, G., Lenck, N. (09/2021). "Repair options for PV modules with cracked backsheets", Energy Science and Engineering, Volume 9, Issue 9, Pages 1583 - 1595, DOI 10.1002/ese3.936

Zauner, M., Mühleisen, W., Holzmann, D., Baumgart, M., Oreski, G., Feldbacher, S., Feichtner, M., Nemitz, W., Leiner, C., Sommer, C. Reil, F. (09/2021). "Light guidance film for bifacial photovoltaic modules", Renewable Energy, Vol 181, pp 604 - 15, DOI: https://doi.org/10.1016/j.renene.2021.09.069

Kerschbaumer, R.C., Bolka, S., Pesl, T., Duretek, I., Lucyshyn, T. (08/2021). "The Relationship between a Defined Microstructure within the Mold Surface and the Corresponding Roughness on the Part: A Systematic Study on Particle Size, Filler-, and Compatibilizer Content", Polymers, Vol. 13, pp 2757, DOI: https://doi.org/10.3390/polym13162757

Pilz, G., Wurzer, S., Morak, M., Pinter, G. (08/2021). "Assessment of the stepped isothermal method for accelerated creep testing of high-density polyethylene", "Mechanics of Time-Dependent Materials, DOI1 0.1007/s11043-021-09512-1

Plesa, I., Notingher, P. V., Schlögl, S., Stancu, C., Wanner, A. J., Wewerka, K., Marx, P., Wiesbrock, F. (08/2021). "Structural Model for the Estimation of the Equivalent Permittivity of Nanodielectrics based on Polyethylene and Epoxy Resins", IEEE Access, Vol. 9, pp 123927-123938, DOI 10.1109/ACCESS.2021.3109337

Shaukat, U., Rossegger, E., Schlögl, S. (08/2021). "Thiol–acrylate based vitrimers: From their structure–property relationship to the additive manufacturing of self-healable soft active devices", Polymer, Vol. 231, pp 124110, https://doi.org/10.1016/j.polymer.2021.124110

Bošnjakovic, D., Fleisch, M., Zhang, X., Drevenšek-Olenik, I. (07/2021). "Electrically tuneable optical diffraction gratings based on a polymer scaffold filled with a nematic liquid crystal", Polymers, Vol. 13, Issue 14, Art. Nr. 2292, DOI: 10.3390/polym13142292

Fleisch, M., Thalhamer, A., Meier, G., Raguž, I., Fuchs, P. F., Pinter, G., Schlögl, S., Berer, M. (07/2021). "Functional mechanical metamaterial with independently tunable stiffness in the three spatial directions", Materials Today Advances, Vol. 11, pp 100155, https://doi.org/10.1016/j.mtadv.2021.100155

Romano, A., Sangermao, M., Rossegger, E., Mühlbacher, I., Griesser, T., Giebler, M., Palmara, G., Frascella, F., Roppolo, I., Schlögl, S. (07/2021). "Hybrid silica micro-particles with light-responsive surface properties and Janus-like character", Polymer Chemistry, Fol 12, Issue 27, pp 3925 - 3938, DOI: 10.1039/d1py00459j

Stieger, S., Mitsoulis, E., Walluch, M., Ebner, C., Kerschbaumer, R.C., Haselmann, M., Mostafaiyan, M., Kämpfe, M., Kühnert, I., Wießner, S. (07/2021). "On the Influence of Viscoelastic Modeling in Fluid Flow Simulations of Gum Acrylonitrile Butadiene Rubber", Polymers, Vol. 13(14), pp 18, https://doi.org/10.3390/polym13142323

Mansour, D., Herzog, C., Christöfl, P., Pitta-Bauermann, L., Oreski, G., Schüler, A., Philipp, D., Gebhardt, P. (06/2021). "Nanoindentation Reveals Crosslinking Behavior of Solar Encapsulants—The Methodological Advantages over Bulk Methods", Polymers, Vol. 13, pp 3328 - 3345, DOI: https://doi.org/10.3390/polym13193328

Dlhý, P., Poduška, J., Berer, M., Gosch, A., Slávik, O., Náhlík, L., Hutar, P. (05/2021). "Crack Propagation Analysis of Compression Loaded Rolling Elements", Materials, Vol. 14, pp 24, https://doi.org/10.3390/ma14102656

Nothingher, P. V., Stancu, C., Plesa, I. (05/2021), "Failure Mechanisms in XLPE Cables", Materials Horizons: From Nature to Nanomaterials, pp. 271-347 (2021), https://doi.org/10.1007/978-981-16-0514-7_11

Blaschke, F., Marx, P., Hirner, S., Mühlbacher, I., Wewerka, K., Wiesbrock, F. (04/2021). "Dielectric properties of shrinkage-free poly(2-oxazoline) networks from renewable resources", Polymers, Volume 13, Issue 82, DOI: 10.3390/polym13081263

Notingher, P.V., Stancu, C., Plesa, I. (04/2021), "Electrical Insulation: XLPE Versus Conventional Materials", Materials Horizons: From Nature to Nanomaterials, pp. 215-297 (2021), https://doi.org/10.1007/978-981-16-0486-7_10

Gosch, A., Arbeiter, F. J., Berer, M., Vojtek, T., Hutar, P., Pinter, G. (04/2021), "Fatigue characterization of polyethylene under mixed mode I/III conditions", International Journal of Fatigue, Vol. 145, pp 1 - 13, DOI: 10.1016/j.ijfatigue.2020.106084

Gosch, A., Arbeiter, F.J., Agnelli, S., Berer, M., Baldi, F. (04/2021). "Size-Induced Constraint Effects on Crack Initiation and Propagation Parameters in Ductile Polymers", Materials, Vol. 14, pp 23, DOI: https://doi.org/10.3390/ma14081945

Macher, J., Hausberger, A., Macher A.E., Morak, M., Schrittesser, B. (04/2021). "Critical review of models for H2-permeation through polymers with focus on the differential pressure method", International Journal o f Hydrogen Energy, Vol. 46, pp 17, pp 22574 - 22590, DOI: http://dx.doi.org/10.1016/j.ijhydene.2021.04.095

Mansouri, M.R., Beter, J., Fuchs, P.F., Schrittesser, B., Pinter, G. (04/2021). "Quantifying matrix-fiber mechanical interactions in hyperelastic materials", International Journal of Mechanical Sciences, Vol. 195, DOI: 10.1016/j.ijmecsci.2021.106268

Moazzen, K., Rossegger, E., Alabiso, W., Shaukat, U., Schlögl, S. (04/2021). "Role of Organic Phosphates and Phosphonates in Catalyzing Dynamic Exchange Reactions in Thiol-Click Vitrimers", Macromolecular Chemistry and Physics, Vol. 222, DOI: 10.1002/macp.202100072

Reisinger, D., Kaiser, S., Rossegger, E., Alabiso, W., Rieger, B., Schlögl, S. (04/2021). "Introduction of Photolatent Bases for Locally Controlling Dynamic Exchange Reactions in Thermo-Activated Vitrimers", Angewandte Chemie International Edition, Vol. 60, Issue 26, DOI: 10.1002/anie.202102946

Rossegger, E., Höller, R., Reisinger, D., Fleisch, M., Strasser, J., Wieser, V., Griesser, T., Schlögl, S. (04/2021). "High resolution additive manufacturing with acrylate based vitrimers using organic phosphates as transesterification catalyst", Polymer, Vol. 221, 123631, DOI: 10.1016/j.polymer.2021.123631

Todorovic, A., Resch-Fauster, K., Mahendran, A.R., Oreski, G., Kern, W. (04/2021). "Curing of epoxidized linseed oil: Investigation of the curing reaction with different hardener types", Journal of Applied Polymer Sicence, Vol. 138, pp 13, https://doi.org/10.1002/app.50239

Balasooriya W., Clute, C., Schrittesser B., Pinter G. (03/2021), "A Review on Applicability, Limitations, and Improvements of Polymeric Materials in High-Pressure Hydrogen Gas Atmospheres", Polymer Reviews, ISSN: 15583724, DOI: 10.1080/15583724.2021.1897997

Barretta, C., Oreski, G., Feldbacher, S., Resch-Fauster, K., Pantani, R. (03/2021). "Comparison of Degradation Behavior of Newly Developed Encapsulation Materials for Photovoltaic Applications under Different Artificial Ageing Tests", Polymer, Vol. 13, pp 271, DOI: https://doi.org/10.3390/polym13020271

Strohmeier, L., Schrittesser, B.,  Schlögl, S. (03/2021), "Approaches Toward In Situ Reinforcement of Organic Rubbers: Strategy and Recent Progress", Polymer Reviews, Vol. 33, DOI: 10.1080/15583724.2021.1897998

Daniso, E., Maroh, B., Feldbacher, S., Mühlbacher, I., Schlögl, S., Melpignano, P. (03/2021). "Tailoring the chemical functionalization of a transparent polyethylene foil for its application in an OLED-based DNA biosensor", Applied Surface Science, Vol. 552, pp 149408, DOI: https://doi.org/10.1016/j.apsusc.2021.149408

Mansouri, M.R., Fuchs, P.F. (03/2021). "Elastic load coupling with tailored elastomer composites", International Journal of Mechanical Sciences, Vol. 4, DOI: 10.1016/j.jcomc.2020.100088

Marx, P., Wiesbrock, F. (03/2021). "Expanding Monomers as Anti-Shrinkage Additives", Polymers, Vol. 13(5), pp 806:1-806:32, DOI: 10.3390/polym13050806

Oreski, G., Eder, G.C., Voronko, Y., Omazic, A., Neumaier, L., Mühleisen, W., Ujvari, G., Ebner, R., Edler, M. (03/2021). "Performance of PV modules using co-extruded backsheets based on polypropylene", Solar Energy Materials and Solar Cells, Vol. 223, pp 110976, DOI: https://doi.org/10.1016/j.solmat.2021.110976

Rueda, F., Rull, N., Quintana, C., Torres, J.P., Messiha, M., Frank, A., Arbeiter, F., Pinter, G. (03/2021). "Modelling Failure Of Polymers: An Optimization Strategy Based on Genetic Algorithms and Instrumented Impact Tests", Journal of Dynamic Behavior of Materials , Vol. 7, DOI: https://doi.org/10.1007/s40870-021-00297-5

Todorovic, A., Resch-Fauster, K., Mahendran, A. R., Oreski, G., Kern, W. (03/2021). "Curing of epoxidized linseed oil: Investigation of the curing reaction with different hardener types", Journal of Applied Polymer Sicence, Vol. 138, pp 50239, DOI: https://doi.org/10.1002/app.50239

Schieppati, J.,Schrittesser, B.,Wondracek, A.,Robin, S.,Holzner, A.,Pinter, G. (03/2021). "Temperature impact on the mechanical and fatigue behavior of a non-crystallizing rubber", International Journal of Fatigue, Volume 144, Article number 106050, DOI
10.1016/j.ijfatigue.2020.106050

Khudiakova, A.,Brunner, A.J., Wolfahrt, M., Pinter ,G. (03/2021). "Quantification approaches for fatigue crack resistance of thermoplastic tape layered composites with multiple delaminations", Materials, Vol. 14, Isue 6, DOI: 10.3390/ma14061476

Wolfberger, A., Hausberger, A., Schlögl, S., Holynska, M. (02/2021). "Assessment of the chemical degradation of PFPE lubricants and greases for space applications: implications for long-term on-ground storage, CEAS Space Journal, 13 (3), pp. 377-388 (2021), https://doi.org/10.1007/s12567-021-00348-6

Mansouri, M.R., Fuchs, P.F., Criscione, J.C., Schrittesser, B., Beter, J. (02/2021). "The contribution of mechanical interactions to the constitutive modeling of fiber-reinforced elastomers", European Journal of Mechanics, A/Solids, Volume 85, January - February 2021, Article number 104081, DOI: 10.1016/j.euromechsol.2020.104081

Gruber, D.P., Haselmann, M., Friesenbichler, W. (02/2021). "Inspection of transparent objects with varying light scattering using a frangi filter", Journal of Imaging, Vol. 7, Issue 2, February 2021, Article number 27

Frank, A., Messiha, M., Koch, T., Poduška, J., Hutař, P., Arbeiter, F., Pinter, G. (02/2021). "Correlation of the cyclic cracked round bar test and hydrostatic pressure test for unplasticized polyvinylchloride", Polymer Testing, Vol. 95, pp 7,  https://doi.org/10.1016/j.polymertesting.2021.107125

Christöfl, P., Czibula, C., Berer, M., Oresk,i G., Teichert, C., Pinter, G. (01/2021). "Comprehensive investigation of the viscoelastic properties of PMMA by nanoindentation", Polymer Testing, Vol.93, Article number 106978, DOI
10.1016/j.polymertesting.2020.106978

Budzik, M. K., Wolfahrt, M., Reis, P., Kozlowski, M., Sena-Cruz, J., Papadakis, L., Nasr Saleh, M., Machalicka, K., V., Teixeira de Freitas, S., Vassilopoulos, A. P. (01/2021). "Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview", The Journal of Adhesion, DOI: 10.1080/00218464.2021.1953479

Giebler, M., Alabiso, W., Wieser, V., Radl, S., & Schlögl, S. (01/2021). "Photopatternable and Rewritable Epoxy-Anhydride Vitrimers", Macromolecular Rapid Communications, Vol.2000466, DOI: https://doi.org/10.1002/marc.202000466

Primetzhofer, A., Stadler, G., Pinter, G., Grün, F. (01/2021). "Model Calibration and Data Set Determination Considering the Local Micro-Structure for Short Fiber Reinforced Polymers", Journal of Composite sience, Vol. 5, pp 11, DOI: 10.3390/jcs5020040

Traintinger, M., Kerschbaumer, R.C., Lechner, B., Friesenbichler, W., Lucyshyn, T. (01/2021). "Temperature Profile in Rubber Injection Molding: Application of a Recently Developed Testing Method to Improve the Process Simulation and Calculation of Curing Kinetics", Polymers, Vol.13(3), pp 12, DOI: 10.3390/polym13030380

2020

Bek, M., Gonzalez-Gutierrez, J., Kukla, C., Pušnik Črešnar, K., Maroh, B.,  Slemenik Perše, L. (12/2020). "Rheological Behaviour of Highly Filled Materials for Injection Moulding and Additive Manufacturing: Effect of Particle Material and Loading ", Applied Sciences, Volume 10, pp 1-23, https://doi.org/10.3390/app10227993

Giebler, M., Alabiso, W., Wieser, V., Radl, S., Schlögl, S. (12/2020). "Photopatternable and Rewritable Epoxy‐Anhydride Vitrimers", Macromolecular Rapid Communications, Vol. 2000466, DOI: https://doi.org/10.1002/marc.202000466

Wolfberger, A., Zehl, M., Hausberger, A., Tockner, M., Schlögl, S., Hołyńska, M.,  Semprimoschnig, C. (12/2020). "Effect of Accelerated Aging on the Chemical Signature and Performance of a Multiply-Alkylated Cyclopentane (MAC) Lubricant for Space Applications", Tribology Letters, Vol. 69, pp 1-13, DOI: https://doi.org/10.1007/s11249-020-01372-z

Rossegger, E., Höller, R., Reisinger, D., Strasser, J., Fleisch, M., Griesser, T., Schlögl, S. (12/2020). "Digital light processing 3D printing with thiol–acrylate vitrimers", Polymer Chemistry, https://doi.org/10.1039/D0PY01520B

Cazin, I., Rossegger, E., Guedes de la Cruz, G., Griesser, T., Schlögl, S. (12/2020). "Recent Advances in Functional Polymers Containing Coumarin Chromophores", Polymers, Vol. 13, pp 1-48, https://doi.org/10.3390/polym13010056

Hutterer, T. , Berger-Weber ,G.R., Kerschbaumer, R.C. , Friesenbichler, W. (12/2020). "Rubber injection molding: Applying multivariate statistics to identify quality issues solely from process signals", Polymer Engineering and Science, Dec.2020, pp 10, https://doi.org/10.1002/pen.25604

Schrader, P. , Gosch, A. ,Berer, M.  Marzi, S. (12/2020). "Fracture of Thin-Walled Polyoxymethylene Bulk Specimens in Modes I and III", Materials, Issue 13, pp 18,https://doi.org/10.3390/ma13225096

Stadler, G., Primetzhofer, A., Jerabek, M., Pinter, G., Grün, F. (12/2020). "Investigation of the influence of viscoelastic behaviour on the lifetime of short fibre reinforced polymers", Polymers, Issue Dec.20, pp13,https://doi.org/10.3390/polym12122874

Wang, C., Bonyadi, S.Z., Grün, F., Pinter, G., Hausberger, A., Dunn, A.C.  (12/2020). "Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass", Materials, Volume 13, Issue 20, pp16, 10.3390/ma13204615

Beter, J., Schrittesser, B., Meier ,G., Lechner, B.,Mansouri, M., Fuchs, P.F., Pinter, G. (12/2020). "The Tension-Twist Coupling Mechanism in Flexible Composites: A Systematic Study Based on Tailored Laminate Structures Using a Novel Test Device", SI: Advanced Rubber Composite, Vol. 12, pp 16,https://doi.org/10.3390/polym12122780

Beter, J., Maroh, B., Schrittesser, B.,  Mühlbacher, I., Griesser, T., Schlögl, S., Fuchs, P.F., Pinter, G. (12/2020). "Tailored Interfaces in Fiber-Reinforced Elastomers: A Surface Treatment Study on Optimized Load Coupling via the Modified Fiber Bundle Debond Technique", SI: Advanced Rubber Composite, Vol.13, pp 17, https://doi.org/10.3390/polym13010036

Christöfl, P., Czibula, C., Berer, M., Oreski, G., Teichert, C., Pinter, G. (12/2020). "Comprehensive investigation of the viscoelastic properties of PMMA by nanoindentation", Polymer Testing, Vol.93,pp, ,https://doi.org/10.1016/j.polymertesting.2020.106978

Urdl, K., Christoefl, P., Weiss, S., Kandelbauer, A., Müller, U., Kern, W. (12/2020). "Thermomechanical and microhardness data of melamine-formaldehyde-based self-healing resin film able to undergo reversible crosslinking via Diels-Alder reaction", Data in Brief, Vol. 33,pp 15, https://doi.org/10.1016/j.dib.2020.106559  

Windberger, M.S., Dimitriou, E., Rendl, S., Wewerka ,K., Wiesbrock, F. (12/2020). "Temperature-Triggered/Switchable Thermal Conductivity of Epoxy Resins", Polymers,Vol 13, pp 11, 65:1-65:11

Blaschke, F., Marx, P., Wiesbrock, F. (12/2020). "Dual/Bi-Stage Curing of Nanocomposites from Renewable Resources upon Volumetric Expansion", Proceedings, Vol.69, pp 8, 3:1-3:8

Windberger, N.S., Dimitriou, E., Wiesbrock, F. (12/2020), "Bisphenol-Free Epoxy Resins Derived from Natural Resources Exhibiting High Thermal Conductivity", Proceedings, Vol 69, pp 7, 18:1-18:7

Hohenwarter, D., Mattausch, H., Fischer, C., Berger, M., Haar, B. (12/2020). "Analysis of the fire behavior of polymers (Pp, pa 6 and pe-ld) and their improvement using various flame retardants", Materials,Volume 13, Issue 24, 2 December 2020, Article number 5756, Pages 1-22

Slapnik, J., Stiller, T., Wilhelm, T., Hausberger, A.    (12/2020). "Influence of solid lubricants on the tribological performance of photocurable resins for vat photopolymerization, Lubricants,Volume 8, Issue 12, December 2020, Article number 104, Pages 1-19

Stadler, G., Primetzhofer, A., Jerabek, M., Pinter, G., Grün, F. (12/2020). "Investigation of the influence of viscoelastic behaviour on the lifetime of short fibre reinforced polymers", Polymers,Volume 12, Issue 12, December 2020, Article number 2874, Pages 1-13

Khudiakova, A.Berer, M. , Niedermair, S.,Plank, B., Truszkiewicz, E., Meier,G., Stepanovsky, H.,Wolfahrt, M., Pinter, G.,Lackner, J. (12/2020). "Systematic analysis of the mechanical anisotropy of fibre-reinforced polymer specimens produced by laser sintering", Additive Manufacturing, Volume 36, December 2020, Article number 101671

Messiha, M., Frank, A., Koch, T., Arbeiter, F., Pinter, G. (11/2020). "Effect of polyethylene and polypropylene cross-contamination on slow crack growth resistance", International Journal of Polymer Analysis and Characterization, Volume 25, Issue 8, 16 November 2020, Pages 649-66

Harder, S., Röper, F., Gibhardt, D., Koert, B., Fiedler, B. (10/2020). "Strength of scarf-bonded CFRP repairs containing disc-shaped zones of weak bonding considering hot-wet conditioning", International Journal of Adhesion and Adhesives, Volume 102, October 2020, Article number 102643

Zinnecker, V., Stokes-Griffin, C.M., Khudiakova, A., Wolfahrt, M., Compston, P. (10/2020). "A comparative study for shear testing of thermoplastic-based composites and metal-composite hybrids", Composites Part A: Applied Science and Manufacturing, Volume 137, October 2020, Article number 105953

Gim, J., Han, E., Rhee, B., Friesenbichler, W., Gruber, D. (09/2020). "Causes of the gloss transition defect on high-gloss injection-molded surfaces",  Polymers, Volume 12, Issue 9, Article number 1940

Mansouri, M. R., Fuchs, P. F., Criscione, J. C., Schrittesser, B., Beter, J. (09/2020). "The contribution of mechanical interactions to the constitutive modeling of fiber-reinforced elastomers", European Journal of Mechanics, A/Solids, Volume 85, January - February 2021, Article number 104081,pp 10, 10.1016/j.euromechsol.2020.104081

Beter, J., Schrittesser, B., Lechner, B., Mansouri, M.R., Marano, C., Fuchs, P.F., Pinter, G. (09/2020). "Viscoelastic Behavior of Glass-Fiber-Reinforced Silicone Composites Exposed to Cyclic Loading", Polymers, Issue 12 1862, pp 17, 10.3390/polym12091862

Anusic, A., Blößl, Y., Oreski, G., Resch-Fauster, K. (09/2020). "High-performance thermoset with 100 % bio-based carbon content",  Polymer Degradation and Stability, Vol. 181, pp 1-9, https://doi.org/10.1016/j.polymdegradstab.2020.109284

Malik, M. S., Schlögl, S., Wolfahrt, M., Sangermano, M. (09/2020). "Review on UV-Induced Cationic Frontal Polymerization of Epoxy Monomers", Polymers, Issue 12,pp 33, 10.3390/polym12092146

Wiesbrock, F. (09/2020). "Kationische Polymerisationen", Faszination Chemie, Issue 2020, pp 1-2

Kaiser, S., Jandl, J. N., Novak, P.,  Schlögl, S. (09/2020). "Design and characterisation of vitrimer-like elastomeric composites from HXNBR rubber", Soft Matter, RSC, Issue 16, pp 14, pp 8577-8590, https://doi.org/10.1039/D0SM00362J

Kaiser, S., Novak, P., Giebler, M., Gschwandl, M., Novak, P., Pilz, G., Morak, M. & Schlögl, S. (09/2020). "The crucial role of external force in the estimation of the topology freezing transition temperature of vitrimers by elongational creep measurements", Polymer, Elsevier, Issue  204, pp 122804, https://doi.org/10.1016/j.polymer.2020.122804

Oreski, G., Omazic, A., Eder, G., Voronko, Y., Neumaier, L.,  Mühleisen, W., Hirschl, C., Ujvari, G., Ebner, R., Edler, M. (09/2020). "Properties and degradation behaviour of polyolefin encapsulants for photovoltaic modules", Progress in Photovoltaics: Research and Applications, pp 12,  https://doi.org/10.1002/pip.3323

Alabiso, W., Schlögl, S. (08/2020). "The impact of vitrimers on the industry of the future: Chemistry, properties and sustainable forward-looking applications", Polymers, Volume 12, Issue 8, August 2020, Article number 1660

Agnelli, S., Balasooriya, W., Bignotti, F., Schrittesser, B. (08/2020). "On the experimental measurement of fracture toughness in SENT rubber specimens", Polymer Testing, Volume 87, July 2020, Article number 106508

Omazic, A., Oreski, G., Edler, M., Eder, G.C. Hirschl, C., Pinter, G., Erceg, M. (08/2020). "Increased reliability of modified polyolefin backsheet over commonly used polyester backsheets for crystalline PV modules",

Pothukuchi, H. K. R., Fuchs, P., Schuecker, C. (06/2020) "Analysis of the critical stresses in high-voltage composite winding insulations under thermal loads", Journal of Composite Materials, Vol. 54, Issue 15, pp 2073 - 2084

Bandl, C., Kern, W., Schlögl, S. (06/2020). "Adhesives for “debonding-on-demand”: Triggered release mechanisms and typical applications", International Journal of Adhesion and Adhesives, Vol. 99, Art. Nr. 102585

Beter, J., Schrittesser; B., Meier, G., Fuchs, P.F., Pinter, G. (06/2020). "Influence of fiber orientation and adhesion properties on tailored fiber-reinforced elastomers", Applied Composite Materials, Vol. 27,3, pp 149 - 164, DOI: 10.1007/s10443-020-09802-w

Gosch, A., Arbeiter, F., Agnelli, S., Berer, M., Pinter, G., Baldi, F. (06/2020). "J-testing of polymers via the load separation criterion based ESIS TC4 procedure: Effect of the specimen size", Polymer Testing, Vol. 89, pp 10, DOI: https://doi.org/10.1016/j.polymertesting.2020.106637

Ules, T., Hausberger, A., Grießer, M., Schlögl, S., Gruber, D. P. (06/2020). "Introduction of a New In-Situ Measurement System for the Study of Touch-Feel Relevant Surface Properties", Polymers, Vol. 12, issue 6, pp 20

Strohmeier, L., Frommwald, H., Schlögl, S. (06/2020). "Digital light processing 3D printing of modified liquid isoprene rubber using thiol-click chemistry",  RSC Advances, Vol. 10, pp 23607 - 23614, DOI: 10.1039/D0RA04186F 

Hennen, D., Hartmann, D., Rieger, P. H., Oesterrreicher, A., Wiener, J., Arbeiter, F., Feuchter, M., Fröhlich, E., Pichelmayer, M., Schlögl, S., Griesser, T. (06/2020). "Exploiting the Carbon and Oxa Michael Addition Reaction for the Synthesis of Yne Monomers: Towards the Conversion of Acrylates to Biocompatible Building Blocks", ChemPhotoChem, Vol. 4, pp 1 - 6, DOI:  https://doi.org/10.1002/cptc.201900199

Rossegger, E., Nees, D., Turisser, S., Radl, S., Griesser, T.,  Schlögl, S. (06/2020). "Photo-switching of surface wettability on micropatterned photopolymers for fast transport of water droplets over a long-distance", Polymer Chemistry, Vol. 11, pp 3125 - 3135, DOI: https://doi.org/10.1039/D0PY00263A

Romano, A., Angelini, A., Rossegger, E., Palmara, G., Castellino, M., Frascella, F., Chiappone, A., Chiadò, A., Sangermano, M., Schlögl S.,  Roppolo, I. (06/2020). "Laser‐Triggered Writing and Biofunctionalization of Thiol‐Ene Networks", Macromolecular Rapid Communications, Vol. 41, pp 2000084 (1 - 7), DOI:  https://doi.org/10.1002/marc.202000084

Giebler, M., Sperling, C., Kaiser, S., Duretek, I., Schlögl, S. (06/2020). "Epoxy-Anhydride Vitrimers from Aminoglycidyl Resins with High Glass Transition Temperature and Efficient Stress Relaxation", Polymers, Vol. 12, pp 1 - 14, DOI:  https://doi.org/10.3390/polym12051148

Romano, A., Roppolo, I., Rossegger, E., Schlögl, S. & Sangermano, M. (06/2020). "Recent Trends in Applying ortho-Nitrobenzyl Esters for the Design of Photo-Responsive Polymer Networks", Materials, Vol. 13, pp 1 - 26, DOI: https://doi.org/10.3390/ma13122777

Mansour, D., Barretta, C., Pitta Bauermann, L., Oreski, G., Schüler, A., Philipp, D., Gebhardt, Ü.(06/2020). "Effect of Backsheet Properties on PV Encapsulant Degradation during Combined Accelerated Aging Tests", Sustainibility, Vol. 12 (12), pp 5208, DOI: https://doi.org/10.3390/su12125208

Romano, A., Angelini, A., Rossegger, E., Palmara, G., Castellino, M., Frascella, F., Chiappone, A., Chiado, A., Sangermano, M., Schlögl, S., Roppolo, I. (05/2020). "Laser-Triggered Writing and Biofunctionalization of Thiol-Ene Networks", Macromolecular Rapid Communications, Vol. 41, Issue 10, Art. Nr. 2000084

Prioglio, G., Agnelli, S., Conzatti, L., Balasooriya, W., Schrittesser, B., Galimberti, M. (04/2020), "Graphene layers functionalized with a janus pyrrole-based compound in natural rubber nanocomposites with improved ultimate and fracture properties", Polymers, Vol. 12, Issue 4, Art. Nr. 944

Urdl, K., Weiss, S., Christöfl, P., Kandelbauer, A., Müller, U., Kern, W. (03/2020). "Diels-Alder modified self-healing melamine resin", European Polymer Journal, Elsevier Vol. 127, 12 S., DOI: 10.1016/j.eurpolymj.2020.109601

Friesenbichler, W., Stieger, S., Kerschbaumer, R., Berger-Weber, G.,  Neunhaeuserer, A., Mitsoulis, E. (03/2020). "Viscoelastic Modelling of Polymer Melts and Rubber Compounds", Advances in Polymer Processing 2020, Springer Berlin Heidelberg,13 S., pp270-282, 10.1007/978-3-662-60809-8_22

Stadler, G., Primetzhofer, A., Pinter, G., Grün, F. (02/2020). "Investigation of fibre orientation and notch support of short glass fibre reinforced thermoplastics", International Journal of Fatigue, Vol. 131, Art. Nr. 105284

Stadler, G., Primetzhofer, A., Pinter, G., Grün, F. (02/2020). "Investigation of fibre orientation and notch support of short glass fibre reinforced thermoplastics", International Journal of Fatigue, Vol. 131, Art. Nr. 105284

Manhart, J., Hausberger, A., Maroh, B., Holzner, A., Schaller, R., Kern, W., & Schlögl, S. (02/2020). "Tribological characteristics of medical gloves in contact with human skin and skin equivalents", Polymer Testing, Wiley, 106318,  DOI:10.1016/j.polymertesting.2019.106318

Beter, J., Schrittesser, B., Maroh, B., Sarlin, E., Fuchs, P. F. (01/2020). "Comparison and Impact of Different Fiber Debond Techniques on Fiber Reinforced Flexible Composites", Polymers, Volume 12, Issue 2 , 11 S., DOI: 10.3390/polym12020472

Beter, J., Schrittesser, B., Fuchs, P. F. (01/2020). "Investigation of adhesion properties in load coupling applications forflexible composites", Materials Today: Proceedings, Elsevier, 6 S., DOI: 10.1016/j.matpr.2020.01.181

Mitterhofer, S., Barretta, C., Castillon, L. F., Oreski, G., Topic, M., Jankovec, M. (01/2020). "A Dual-Transport Model of Moisture Diffusion in PV Encapsulants for Finite-Element Simulations", IEEE Journal of Photovoltaics, Vol. 10, Issue 1, Art. Nr. 8920094, pp 94 - 102

2019

Eder, G. C., Voronko, Y., Oreski, G., Mühleisen, W., Knausz, M., Omazic, A., Rainer, A., Hirschl, C., Sonnleitner, H., (12/2019). "Error analysis of aged modules with cracked polyamide backsheets", Solar Energy Materials and Solar Cells, Vol. 203, Art. Nr. 110194

Rossegger, E., Pirolt, F., Hoeppener, S., Schubert, U. S., Glatter, O. & Wiesbrock, F.,  (12/2019). "Crosslinkable/functionalizable poly(2-oxazoline)­based micelles", European polymer journal. 121, 9 S., 109305.

Marx, P., Romano, A., Roppolo, I., Chemelli, A., Mühlbacher, I., Kern, W., Chaudhary, S., Andritsch, T., Sangermano, M. & Wiesbrock, F., (12/2019). "3D-Printing of High-κ Thiol-Ene Resins with Spiro-Orthoesters as Anti-Shrinkage Additive", Macromolecular materials and engineering. 304, 12, 10 S., 1900515.

Poduška, Jan; Hutař, Pavel; Frank, Andreas; Kučera, Jaroslav; Sadílek, Jiří; Pinter, Gerald; Nahlik, Lubos (12/2019). "Soil Load on Plastic Pipe and its Influence on Lifetime", Strojnícky časopis - Journal of Mechanical Engineering, Sciendo, Vol. 63(3), pp 101-106, DOI: 10.2478/scjme-2019-0036

Khudikova A., Grasser V., Blumenthal C., Wolfahrt M., Pinter G. (12/2019). "Automated monitoring of the crack propagation in mode I testing of thermoplastic composites by means of digital image correlation", Polymer Testing, Elsevier, Vol. 82, DOI: 10.1016/j.polymertesting.2019.106304

Sandström, R., Annamalai, A., Boulanger, N., Ekspong, J., Talyzin, A., Mühlbacher, I., Wagberg, T. (07/2019). "Evaluation of fluorine and sulfonic acid co-functionalized graphene oxide membranes under hydrogen proton exchange membrane fuel cell conditions", Sustainable Energy and Fuels, Vol. 3, Issue 7, pp 1790-1798; DOI: 10.1039/C9SE00126C

Urdl, K., Weiss, S., Brodbeck, B., Kandelbauer, A., Zikulnig-Rusch, E., Müller, U., Kern, W. (07/2019). " Homogeneous, monodispersed furan-melamine particles performing reversible binding and forming networks", European Polymer Journal, Vol. 116, pp 158-168

Urdl, K., Weiss, S., Hesser, G., Kandelbauer, A., Waldhauser, W., Schwarz, T. (08/2019). "Data on production and characterization of melamine-furan-formaldehyde particles and reversible reactions thereof", Data in Brief, Vol. 25, Art. Nr. 104056

Lackner, J. M., Thirumalai, S., Hausberger, A., Waldhauser, W., Schwarz, T. (08/2019). "Reibungsmindernde Beschichtungen für Elastomere aus Diamant ähnlichem Kohlenstoff (Teil 1)", Galvanotechnik, Vol. 110, Issue 8, pp 1536-1538

Kerschbaumer, R. C., Stieger, S., Gschwandl, M., Hutterer, T., Fasching, M., Lechner, B., Meinhart, L., Hildenbrandt, B., Schrittesser, B. (09/2019). "Comparison of steady-state and transient thermal conductivity testing methods using different industrial rubber compounds", Polymer Testing, Vol. 80, DOI: 10.1016/j.polymertesting.2019.106121

Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F., Schwarz, T. (09/2019). "Fretting Behavior of Thermoplastic Polyurethanes", Lubricants, Vol. 2019, 7(9), 73, DOI: 10.3390/lubricants7090073

Wang, C., Stiller, T., Hausberger, A., Pinter, G., Grün, F., Schwarz, T. (09/2019) "Correlation of tribological behavior and fatigue properties of filled and unfilled TPUs", Lubricants Special Issue "Tribology of seals", Vol. 2019, 7(7), 60, DOI: 10.3390/lubricants7070060

Gosch, A., Berer, M., Hutar, P., Slavik, O., Fojtek, T., Arbeiter, F. J., Pinter, G. (09/2019). "Mixed Mode l/lll fatigue fracture characterization of Polyoxymethylene", International Journal of Fatigue, Vol. 130, DOI: 10.1016/j.ijfatigue.2019.105269

Giebler, M., Radl, S., Ules, T., Griesser, T., Schlögl, S. (09/2019). "Photopatternable Epoxy-BAsed Thermosets", Materials, Vol. 12 (15), pp 1-12, DOI: 10.3390/ma12152350

Kaiser, S., Wurzer, S., Pilz, G., Kern, W., Schlögl, S. (09/2019). "Stress relaxation and thermally adaptable properties in vitrimer-like eslastomers from HXNBR rubber with covalent bonds", Soft Matter, Vol. 15, pp 6062 - 6072; DOI: 10.1039/C9SM00856J

Küppers, B., Schlögl, S., Oreski, G., Pomberger, R., Vollprecht, D. (06/2019). "Influence of surface roughness and surface moisture of plastics on sensor-based sorting in the near infrared range", Journal of Waste Management & Research, DOI: 10.1177/0734242X19855433

Khudiakova, A., Arbeiter, F., Spoerk, M., Wolfahrt, M., Godec, D., Pinter, G. (06/2019). "Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication", Additive Manufacturing, Vol. 28, pp 184 - 193, DOI: 10.1016/j.addma.2019.05.006

Wiesbrock, F., Luef, K. P.,  Rossegger, E. (06/2109). "UV-mediated crosslinking of poly(2-oxazoline)s: Fabrication of polymers for biomedical applications", Abstract of papers, Vol. 257, pp PMSE-0567

Windberger, M. S., Kelly, A., Mühlbacher, I., Wiesbrock, F. (06/2019). "Polypropylene-based blends and compounds with antimicrobial activity", Abstract of papers, Vol. 257, pp POLY-0493

Katschnig, M., Maroh, B., Andraschek, N., Schlögl, S., Zefferer, U., Bock, E., Leitinger, G., Trattnig, C., Kaufmann, M., Balika, W., Holzer, C., Schäfer, U., Patz, S. (06/2019). "Cell Morphology on Poly(methyl methacrylate) Microstructures as Function of Surface Energy", International Journal of Biomaterials, Article ID 2393481, 12 pp, DOI: 10.1155/2019/2393481

Wiesbrock, F., Eibel, A., Marx, P., Hofmann, R. (06/2019). "Merging dielectric stability and ubiquitous adhesion: Poly(2-oxazoline)s in microelectronics and high voltage engineering", Abstracts of papers, Vol. 257, pp POLY-0152

Windberger, M. S., Dimitriou, E., Wiesbrock, F. (06/2019). "Enhancing the thermal conductivity of crosslinked epoxy resins by the addition of bisphenyl units and silica nanoparticles", Abstracts of papers, Vol. 257, pp PMSE-0586

Haselmann, M., Gruber, D. P. (05/2019). "Pixel-Wise Defect Detection by CNNs without Manually Labeled Training Data", Applied Artificial Intelligence, Vol. 33, Issue 6, pp 548 - 566

Omazic, A., Oreski, G., Halwachs, M., Eder, G., Hirschl, C., Neumaier, L., Pinter, G., Erceg, M. (03/2019). "Relation between degradation of polymeric components in crystalline silicon PV module and climatic conditions: A literature review", Solar Energy Materials and Solar Cells, Vol. 192, pp123-133, DOI: 10.1016/j.solmat.2018.12.027

Halwachs, M., Neumaier, L., Vollert, N., Maul, L., Dimitriadis, S., Voronko, Y., Eder, G., Omazic, W. (03/2019). "Statistical evaluation of PV system performance and failure data among different climate zones", Renewable Energy, Vol. 139, pp 1040 - 1060, DOI: 10.1016/j.renene.2019.02.135

Taudt, C., Nelsen, B., Rossegger, E., Schlögl, S., Koch, E., Hartmann, P. (03/2019). "Spatially Resolved Cross-Linking Characterization by Imaging Low-Coherence Interferometry", Sensors, Vol. 19(5), pp 1-12, DOI: 10.3390/s19051152

Röper, F., Wolfahrt, M., Schlögl, S., Kucher, G., Pinter, G. (03/2019). "Bonded aerospace repairs under tensile loading: Wet chemical surface treatment and selected environmental conditions", Journal of Applied Polymer Science, Vol. 136 (19), DOI: 10.1002/APP.47506

Marx, P., Romano, A., Fischer, R., Roppolo, I., Sangermano, M., Wiesbrock, F. (03/2019). "Front Cover of Macromolecular Materials and Engineering", Macromolecular Materials and Engineering, Vol. 304(4), pp 1970009:1-1970009:5

Marx, P., Romano, A., Fischer, R., Roppolo, I., Sangermano, M., Wiesbrock, F. (03/2019). "Dual-Cure Coatings: Spiroorthoesters as Volume-Controlling Additives in Thiol-Ene Reactions", 
Macromolecular Materials and Engineering, Vol. 304(4), pp 1800627:1-1800627:5

Nothdurft, P., Riess, G., Kern, W. (03/2019). "Copper/Epoxy Joints in Printed Circuit Boards: Manufacturing and Interfacial Failure Mechanisms", Materials, Vol. 12, pp 550:1-550:18

Rossegger, E., Hennen, D., Griesser, T., Roppolo, I., Schlögl, S. (03/2019). "Directed motion of water droplets on multi-gradient photopolymer surfaces", Polymer Chemistry, Vol. 10, pp 1882 - 1893, DOI: 10.1039/C9PY00123A

Primetzhofer, A., Stadtler, G., Pinter, G., Grün, F. (03/2019). "Lifetime assessment of anisotropic materials by the example short fibre reinforced plastic", International Journal of Fatigue, Vol. 120, pp 294-302

Pothukuchi, H.K.R., Fuchs, P., Pinter, G., Stelzer, S. (03/2019). "Fracture mechanical characterization of mica-filled epoxy glass composites under monotonic and cyclic loading", Journal of Composite Materials, Vol. 53, Issue 6, pp 741-751

Steck, D., Qu, J., Kordmahale, S.B., Tscharnuter, D., Muliana, A., Kameoka, J. (03/2019). "Mechanical responses of Ecoflex silicone rubber: Compressible and incompressible behaviors", Journal of Apllied Polymer Science, Vol. 136,  Issue 5, Art. Nr. 47025

Balasooriya, W., Schrittesser, B., Pinter, G., Schwart, T., Conzatti, L. (03/2019). "The effect of the surface area of carbon black grades on HNBR in harsh environments", Polymers, Vol. 11, Issue 1, Art. Nr. 61

Brecl, K., Barretta, C., Oreski, G., Malic, B., Topic, M. (03/2019). "The Influence of the EVA Film Aging on the Degradation Behavior of PV Modules under High Voltage Bias in Wet Conditions Followed by Electroluminescence", IEEE Journal of Photovoltaics, Vol 9, Issue 1 Art. Nr. 8513895,pp 259-265

Primetzhofer, A., Stadler, G., Grün, F., Pinter, G. (01/2019). "Datensatzermittlung zur Lebensdauervorhersage kurzfaserverstärkter Kunststoffe", Zeitschrift Kunststofftechnik, Vol. 2019, www.Kunststofftech.com

2018

Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F., Schwarz, T. (12/2018). An investigation of fretting behavior of thermoplastic polyurethane for mechanical seal application, Polymer Testing, Volume 72, 271-284, DOI: 10.1016/j.polymertesting.2018.10.037

Morak, M., Marx, P., Gschwandl, M., Fuchs, P. F., Pfost, M., Wiesbrock, F. (12/2018). "Heat Dissipation in Epoxy/Amine-Based Gradient Composites with Alumina Particles: A Critical Evaluation of Thermal Conductivity Measurements", Polymers 2018, Vol. 10 (10), p 1131, DOI: 10.3390/polym10101131

Morak, M., Tscharnuter, D., Lucyshyn, T., Hahn, W., Göttlinger, M., Kummer, M., Steinberger, R., Gross, T. (12/2018). "Optimization of fiber prediction model coefficients in injection molding simulation based on micro computed tomography", Polymer Engineering and Science (PES), pp 9, DOI: 10.1002/pen.25013

Frank, A., Arbeiter, F., Berger, I. Hutar, P., Nahlik, L., Pinter, G. (12/2018). "Fracture Mechanics Lifetime Prediction of Polyethylene Pipes", J. Pipeline Syst. Eng. Pract., Vol. 10(1), DOI: 10.1061/(ASCE)PS.1949-1204.0000356

Berer, M., Halb, M., Feuchter, M., Pacher, G., Pinter, G. (12/2018). "Fatiuge Fracture Properties and Morphology of Polyoxymethylene (POM) Plates Produced under Moderate Processing Conditions", International Journal of Polymer Science, Vol. 2018, DOI: 10.1155/2018/7410925

Plesa, I., Notingher, P. V., Stancu, C., Wiesbrock, F., Schlögl, S. (12/2018). "Polyethylene nanocomposites for power cable insulations", Polymers, Vol. 11, Issue 1, Art. Number 24, DOI: 10.3390/polym11010024

Gosch, A., Arbeiter, F. J., Berer, M., Pinter, G. (12/2018). "Comparison of J-integral methods for the characterization of tough polypropylene grades close to the glass transition", Engineering Fracture Mechanics, Vol. 203, DOI: 10.1016/j.engfracmech.2018.06.002

Romano, A., Roppolo, I., Giebler, M., Dietliker, K., Možina, Š., Šket, P., Mühlbacher, I., Schlögl, S. & Sangermano, M. (12/2018). "Stimuli-responsive thiol-epoxy networks with photo-switchable bulk and surface properties.", RSC Advances, Vol. 8(73), 2018, pp 41904 - 41914

Müller, C., Zhang, Z., Schwarz, R., Pukel, G., Wiesbrock, F., Bakija, B., Muhr, H. M. (12/2018). "Adhesives for bonding transformerboard: partial discharge and ageing behaviour", e&i - Elektrotechnik und Informationstechnik, Vol. 135(8), 2015, pp 623 - 627

Bulatovic, V. O., Mihaljevic, A., Govorcin Bajsic, E. (11/2018). "Mechanical and interfacial properties of compatibilized polyurethane blends", Polymer Engineering and Science, Vol. 58, Issue 11, pp 1911 - 1922, DOI: 10.1002/pen.24800

Hausberger, A., Major, Z., Theiler, G., Gradt, T. (10/2018). "Observation of the adhesive- and deformation- contribution to the friction and wear behaviour of thermoplastic polyurethanes", Wear, Vol. 412 - 413, pp 14 - 22, DOI: 10.1016/j.wear.2018.07.006

Bredács, M., Frank, A., Bastero, A., Stolarz, A., Pinter, G. (09/2018). "Accelerated aging of polyethylene pipe grades in aqueous chlorine dioxide at constant concentration", Polymer Degradation and Stability , Vol.2018, pp 20,  DOI: 10.1016/j.polymdegradstab.2018.09.019

Urdl, K., Weiss, S., Karpa, A., Peric, M., Zikulnig-Rusch, E., Brecht, M., Kandelbauer, A., Müller, U., Kern, W. (09/2018). "Furan-functionalised melamine-formaldehyde particles performing Diels-Alder reactions", European Polymer Journal, Vol. 108, p 225 - 234, DOI: 10.1016/j.eurpolymj.2018.08.023

Manhart, J., Schlögl, S., Kern, W. (09/2018). "Photo-triggered Self-healing of Elastomers", Kautschuk Gummi Kunststoffe, Vol. 71 (9), p 30 - 32

Giebler, M., Radl, S. V., Ast, M., Kaiser, S., Griesser, T., Kern, W., Schlögl, S. (09/2018). "Dual-Responsive Polydimethylsiloxane Networks", Journal of Polymer Science Part A: Polymer Chemistry,   Vol. 56 (20), p 2319 - 2329, DOI: 10.1002/pola.29206

Hofmann, R., Luef, K. P., Kelly, A. M., Wiesbrock, F. (09/2018). "Maintenance-free polymer-based contact poly(2-oxazoline)-based biocides in polyolefin blends", Abstracts of papers / American Chemical Society, 2018-(2), Poly-429

Hofmann, R., Mühlbacher, I.,  Wiesbrock, F. (09/2018). "Adjusted surfaces: Tailoring the isoelectric point via modification of ester-functionalized poly(2-oxazoline)s", Abstracts of papers / American Chemical Society, Vol. 2018 (2), Poly-129

Wiesbrock, F., Petit, C., Luef, K. P., Grassl, B.,  Reynaud, S. (09/2018). "Ionic liquids as (recyclable) reaction media for the synthesis of poly(2-oxazoline)-based photoresists from renewable resources", Abstracts of papers / American Chemical Society, Vol. 2018 (2), Poly-298

Wiesbrock, F., Eibel, A., Marx, P., Jin, H., Tsekmes, I-A., Kochetov, R., Smit, J. J. (09/2018). "High-voltage insulators based on polymers and nanocomposites derived from natural resources", Abstracts of papers / American Chemical Society, Vol. 2018 (2), PMSE-704

Marx, P., Morak, M., Gschwandl, M., Fuchs, P., Antretter, T., Pfost, M., Kern, W., Wiesbrock, F. (09/2018). "Gradient polymer composites for optimum heat dissipation", Abstracts of papers / American Chemical Society, Vol. 2018 (2), PMSE-772

Wiesbrock, F., Luef, K. P., Ottersböck, B., Oreski, G., Petit, C., Grassl, B.,  Reynaud, S. (09/2018). "Enzyme-degradable hydrogels based on copoly(2-oxazoline) networks", Abstracts of papers / American Chemical Society, Vol. 2018 (2), POLY-277

Marx, P., Wanner, A. J., Jin, H., Tsekmes, I-A., Smit, J. J., Kern, W.,  Wiesbrock, F. (09/2018). "Effect of surface interactions on the insulating properties of epoxy composites", Abstracts of papers / American Chemical Society, Vol. 2018 (2), POLY-77

Moldaschl, T., Arnold, T., Zauner, M., Meislitzer, S., Obersteiner, D., De Biasio, M., Steinbrener, J., Neumaier, L., Molzbichler, A., Cramer, H., Ottersböck, B., Oreski, G., Voronko, Y., Kraft, M., Hirschl, C. (09/2018). "Impurity detection in polymer parts for the semiconductor manufacturing industry", Technisches Wissen, 9 pages, DOI: 10.1515/teme-2018-0056

C. Wang, A. Hausberger, J. M. Lackner, T. Schwarz (09/2018). The potential of tribological application of DLC/MoS2 coated sealing materials, Coatings, MDPI, 2018, 8(8), 21, 267-288, DOI: 10.3390/coatings8080267

Nothdurft, P., Feldbacher, S., Jakopic, G., Mühlbacher, I., Pötz, S., Kern, W. (08/2018). "Surface characterization of copper substrates modified with carboxyl terminated phosphonic acids", International Journal of Adhesion and Adhesives, Vol. 84, pp 143-52, DOI: 10.1016/j.ijadhadh.2018.03.012 

Tao, Q., Pinter, G., Antretter, T., Krivec, T., Fuchs, P. (07/2018). "Model free kinetics coupled with finite element method for curing simulation of thermosetting epoxy resins" Journal of Applied Polymer Science, Vol. 135, Articel Nr. 46408, DOI: 10.1002/app.46408

Resch-Fauster, K., Hengstberger, F., Zauner, C., Holper, S. (06/2018). "Overheating protection of solar thermal façades with latent heat storages based on paraffin-polymer compounds", Energy and Buildings, Vol. 169, pp 254 - 259,  DOI: 10.1016/j.enbuild.2018.03.068 

Balasooriya, W., Schrittesser, B., Pinter, G., Schwarz, T. (06/2018). "Induced material degradation of elastomers in harsh environments", Polymer Testing, Vol. 69, pp 107 - 115, DOI: 10.1016/j.polymertesting.2018.05.016

Poduskaa, J., Hutar, P., Frank, A., Kucera, J., Sadilek, J., Pinter, G., Nahlik, L. (06/2018). "Numerical simulations of cracked round bar test - Effect of residual stresses and crack asymmetry", Engineering Fracture Mechanics, DOI: 10.1016/j.engfracmech.2018.06.032

Resch-Fauster, K., Feuchter, M. (05/2018). "Thermo-physical characteristics, mechanical performance and long-term stability of high temperature latent heat storages based on paraffin-polymer compounds", Thermochimica Acta, Vol. 663, pp 34 - 45,  DOI: 10.1016/j.tca.2018.03.004 

Annamalai, A., Sandström, R., Gracia-Espino, E., Boulanger, N., Boily, F.-F., Mühlbacher, I., Schukarev, A., Wagberg, T. (05/2018). "Influence of Sb5+ as a Double Donor on Hematite (Fe3+) Photoanodes for Surface-Enhanced Photoelectrochemical Water Oxidation", ACS Applied Materials and Interfaces, Vol. 10, Issue 19, pp 16467 - 16473,  DOI: 10.1021/acsami.8b02147 

Muliana, A., Rajagopal, K. R., Tscharnuter, D., Schrittesser, B., Saccomandi, G. (04/2018). "Determining material properties of natural rubber using fewer material moduli in virtue ofa novel constitutive approach for elastic bodies", Rubber Chemistry and Technology, Vol. 91, Issue 2, pp 375 - 389,  DOI: 10.5254/RCT.18.81675 

Sahin, M., Schlögl, S., Kalinka, G., Wang, J., Kayak, B., Mühlbacher, I., Ziegler, W., Kern, W., Grützmacher, H. (04/2018). "Tailoring the interfaces in glass fiber-reinforced photopolymer composites", Polymer (United Kingdom), Vol. 141, pp 221 - 231, DOI: 10.1016/j.polymer.2018.03.020

Nothdurft, P., Feldbacher, S., Jakopic, G., Mühlbacher, I., Pötz, S., Kern, W. (03/2018). "Surface characterization of copper substrates modified with carboxyl terminated phosphonic acids", International Journal of Adhesion and Adhesives, Vol. 84, pp 143 - 152 DOI:10.1016/j.ijadhadh.2018.03.012

Eibel, A., Marx, P., Jin, H., Tsekmes, I-A., Mühlbacher, I., Smit, J. J., Kern, W., Wiesbrock, F. (03/2018). "Enhancement of the Insulation Properties of Poly(2-oxazoline)-co-Polyester Networks by the Addition of Nanofillers", Macromolecular Rapid Communications, Vol. 39(6), pp 1700681:1-1700681:6, DOI: 10.1002/marc.201700681

Thirumalai, S., Hausberger, A., Lackner, J. M., Waldhauser, W., Schwarz, T. (03/2018). "Anode layer source plasma-assisted hybrid deposition and characterization of diamond-like carbon coatings deposited on flexible substrates", Thin Solid Films, Vol. 655, pp 54 - 61, DOI:10.1016/j.tsf.2018.04.012

Mostafa, A.,Lucyshyn, T., Holzer, C., Flachberger, H., Oefner, W., Riess, G., Fritz, B. (03/2018). "Influence of filler treatment on the behavior of blast furnace slag filled polypropylene compounds", Journal of Applied Polymer Science, Vol. 135, DOI: 10.1002/app.46535

Sahin, M., Krawczyk, K. K., Roszokowski, P., Wang, J., Kaynak, B., Kern, W., Schlögl, S., Grützmacher, H. (03/2018). "Photoactive silica nanoparticles: Influence of surface functionalization on migration and kinetics of radical-induced photopolymerization reactions", European Polymer Journal, Vol. 98, pp 430 - 438,  DOI: 10.1016/j.eurpolymj.2017.11.046

Kaiser, S., Radl, S., Manhart, J., Ayalur-Karunakaran, S., Griesser, T., Moser, A., Ganser, C., Teichert, C., Kern, W., Schlögl, S. (03/2018). "Switching "on" and "off" the adhesion in stimuli-responsive elastomers", Soft Matter, Vol. 14, pp 2547 - 2559

Balasooriya, W., Schrittesser, B., Wang, C., Hausberger, A., Pinter, G., Schwarz, T. (03/2018). "Tribological Behavior of HNBR in Oil and Gas Field Applications", Lubricants 2018, 6(1), Vol. Lubricants 2018, 6 (1), DOI: 10.3390/lubricants6010020

Fleischmann, D. D., Ayalur-Karunakaran, S., Arbeiter, F., Schaller, R., Holzner, A., Kern, W., Schlögl, S. (01/2018). "Influence of crosslinker and water on mechanical properties of carboxylated nitrile butadiene rubber (XNBR), Polymer Testing, Vol. 66, pp 24 - 31
DOI: 10.1016/j.polymertesting.2018.01.001

Fleischmann, D. D., Ayalur-Karunakaran, S., Arbeiter, F., Schaller, R., Holzner, A., Kern, W., Schlögl, S. (01/2018). "Influence of crosslinker and water on mechanical properties of carboxylated nitrile butadiene rubber (XNBR), Polymer Testing, Vol. 67, pp 309 - 321
DOI: 10.1016/j.polymertesting.2018.03.021

Battisti, M., Perko, L., Arunachalam, S., Stieger, S., Friesenbichler, W. (01/2018). "Influence of elongational flow generating nozzles on material properties of polypropylene nanocomposites", Polymer Engineering and Science, Vol. 58, pp 3 - 12  DOI: 10.1002/pen.24361

2017

Haselmann, M., Gruber, D. P. (12/2017). "Supervised machine learning based surface inspection by synthetizing artificial defects", 2017 16th IEEE International Conference on Machine Learning and Applications, Vol. 16, pp 390 - 395

Schlothauer, J., C., Peter, C., Hirschl, C., Oreski, G., Röder, B. (12/2017). "Non-destructive monitoring of ethylene vinyl acetate crosslinking in PV-modules by luminescence spectroscopy", Journal of Polymer Research, Vol. 24, Art. Nr. 233, DOI: 10.1007/s10965-017-1409-y
DOI: 10.1007/s10965-017-1409-y

Resch-Fauster, K., Klein, A., Blees, E., Feuchter, M. (11/2017). "Mechanical recyclability of technical biopolymers: Potential and limits", Polymer Testing, Vol. 64 (2017), pp 287 - 295
DOI: 10.1016/j.polymertesting.2017.10.017

Resch-Fauster, K., Weber, A., Holper, S., Grobbauer, M. (10/2017). "Thermotropic overheating protection for façade-integrated solar thermal collectors", Solar Energy Materials and Solar Cells, Vol. 170, pp 39 - 47, DOI: 10.1016/j.solmat.2017.05.060

Hofmann, R. J., Vlatkovic, M., Wiesbrock, F. (10/2017). "Fifty years of hydrosilylation in polymer science: A review of current trends of low-cost transition-metal and metal-free catalysts, non-thermally triggered hydrosilylation reactions, and industrial applications", Polymers, Vol. 9., Issue 10, Oct 2017, Art. Nr. 534 DOI: 10.3390/polym9100534

Petit, C., Grassl, B., Mignard, E., Luef, K. P., Wiesbrock, F., Reynaud, S. (10/2017). "Living cationic ring-opening polymerization of 2-ethyl-2-oxazoline following sustainable concepts: Microwave-assisted and droplet-based millifluidic processses in an ionic liquid medium", Polymer Chemistry, Vol. 8, pp 5910 - 5917 DOI: 10.1039/c7py01255a

Berger, K., Keimel, C., Helfer, E., Haar, B., Eder, A., Mattausch, H., Riess, G. (10/2017). "Permeation of hydrocarbons through organosilane crosslinked LDPE", Journal of Applied Polymer Science, Vol. 134 Art. Nr. 45374 DOI: 10.1002/app.45374

Roszkowski, P., Sahin, M., Ayalur-Karunakaran, S., Gammer, C., Schlögl, S., Kern, W., Krawczyk, K. K. (10/2017). "Synthesis and evaluation of new radical photoinitiators bearing trialkoxysilyl groups for surface immobilization", Polymer (United Kingdom), VOl. 129, pp 207 - 220, DOI: 10.1016/j.polymer.2017.09.054

Omazic, M., Tscharnuter, D., Oreski, C., Pinczolits, M., Nikac, N., Rappmund, A., Erceg, M., Pinter, G. (09/2017). "Optimum Chip-Tape Adhesion for Reliable Pickup Process", IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 99, DOI: 10.1109/TCPMT.2017.2744603

Plöckl, M., Kuhn, P., Grosser, J., Wolfahrt, M., Körber, H. (09/2017). "A dynamic test methodology for analyzing the strain-rate effect on the longitudinal compressive behavior of fiber-reinforced composites", Composite Structures, Vol. 180, pp 429 - 438, DOI: 10.1016/j.compstruct.2017.08.048

Mostafa A., Pacher G., Lucyshyn T., Holzer C., Krischey E., Flachberger H., Fritz B., Laske S. (08/2017). „Influence of Melt Compounding on Blast Furnace Slag Filled PP Compounds: A Comparative Study”, International Polymer Processing, Vol 32, Issue 4, pp 446-54, DOI: 10.3139/217.3365

Arbeiter, F., Pinter, G., Lang, R. W., Frank, A. (07/2017). "Fracture mechanics methods to assess the lifetime of thermoplastic pipes", Springer Series in Materials Science, Vol. 247, pp 33 - 54, DOI:10.1007/978-3-319-41879-7_3

Berger, K., Keimel C., Helfer, E., Haar, B., Mattausch, H., Riess, G., Kern, W. (07/2017). "The effects of e-beam crosslinking of LDPE on the permeation of hydrocarbons", Journal of Applied Polymer Science, Vol. 134, art. 44968, DOI:10.1002/app.44968

Berger, I. J., Frank, A., Arbeiter, F., Pinter, G. (06/2017). "Characterization of slow crack growth resistance of polyethylene pipe grades with cyclic cracked round bar (crb) test in correlation to strain hardening (SH) test", in proc: Annual Technical Conference - ANTEC, Vol. 2017, 5 p

Frank A., Berger, I. J., Arbeiter, F., Pinter, G. (06/2017). "The Cyclic Cracked Round Bar Test as a new standard for accelerated material ranking of polyethylene pipe grades", in proc: Annual Technical Conference - ANTEC, Vol. 2017, 5 p

Arbeiter, F., Pinter, G., Frank, A. (06/2017). "Influence of long-term annealing on residual stress distribution and quasi-brittle failure properties of talcum reinforced pipe grade polypropylene", Macromolecular Symposia, Vol. 2017, 6 p

Nezbedová, E., Pinter, G., Frank, A., Hutar, P., Poduska, J., Hodan, J. (06/2017). "Accelerated Tests for Lifetime Prediction of PE-HD Pipe Grades", Macromolecular Symposia, Vol. 373, DOI:10.1002/masy.201600096

Balasooriya, W., Schrittesser, B., Karunakaran, S., Schlögl, S., Pinter, G., Schwarz, T. (06/2017). "Influence of thermo-oxidative ageing of HNBR in oil field applications", Macromolecular symposia, Vol. Jun 17, pp 373 - 389, DOI: 10.1002/masy.201600093

Klein, A., Oreski, G., Resch-Fauster, K. (06/2017). "Applicability of technical biopolymers as absorber materials in solar thermal collectors", Solar Energy, Vol. 153, pp 276 - 288, DOI:10.1016/j.solener.2017.05.069

Oreski, G., Mihaljevic, A., Voronko, Y., Eder, G. C. (06/2017). "Acetic acid permeation through photovoltaic backsheets: Influence of the composition on the permeation rate", Polymer Testing, Vol. 60, pp 374 - 380, DOI:10.1016/j.polymertesting.2017.04.025

Oreski, G., Rauschenbach, A., Hirschl, C., Kraft, M., Eder, G. C., Pinter, G. (06/2017). "Crosslinking and post-crosslinking of ethylene vinyl acetate in photovoltaic modules", Journal of Applied Polymer Science, Vol. 134, Art. 44912, DOI:10.1002/app.44912#

Ottersböck, B., Oreski, G., Pinter, G. (06/2017). "Comparison of different microclimate effects on the behavior of encapsulation materials used in photovoltaic modules", Polymer Degradation and Stability, VOl. 138, pp 182 - 191, DOI:10.1016/j.polymdegradstab.2017.03.010

Balasooriya, W., Schrittesser, B., Karunakaran, S., Schlögl, S., Pinter, G., Schwarz, T., Kadar, Z. (06/2017). "Influence of Thermo-Oxidative Ageing of HNBR in Oil Field Applications", Macromolecular Symposia, Vol. 373, art. 16000093,DOI: 10.1002/masy.201600093

Marx, P., Wanner, A. J., Zhang, Z., Jin, H., Tsekmes, I.-A., Smit, J. J., Kern, W., Wiesbrock, F. (06/2017). "Effect of interfacial polarization and water absorpition on the dielectric properties of epoxy-nanocomposites", Polymers, Vol. 9, art. 195,DOI:10.3390/polym9060195

Oesterrreicher, A., Moser, A., Edler, M., Griesser, H., Schlögl, S., Pichelmayer, M., Griesser, T. (05/2017). "Investigating Photocurable Thiol-Yne Resins for Biomedical Materials", Macromolecular Materials and Engineering, Vol. 302, art. 16000450,DOI: 10.1002/mame.201600450

Sahin, M., Ayalur-Karunakaran, S., Manhart, J., Wolfahrt, M., Kern, W., Schlögl, S. (04/2107)."Thiol-Ene versus Binary Thiol-Acrylate Chemistry: Material Properties and Network Characteristics of Photopolymers", Advanced Engineering Materials, Vol. 19, art. 1600620,DOI: 10.1002/adem.201600620

Katschnig, M., Arbeiter, F., Haar, B., van Campe, G., Holzer, C. (04/2017). "Cranial Polypropylene Implants by Fused Filament Fabrication", Advanced Engineering Materials, Vol. 19, art. 1600676,DOI: 10.1002/adem.201600676

Berer, M., Mitev, I., Pinter, G. (04/2017). "Finite element study of mode I crack opening effects in compression-loaded cracked cylinders", Engineering Fracture Mechanics, Vol. 175, pp 1 - 14, DOI: 10.1016/j.engfracmech.2017.03.008,DOI: 10.1016/j.engfracmech.2017.03.008

Radl, S., Schipfer, C., Kaiser, S., Moser, A., Kaynak, B., Kern, W., Schlögl, S. (03/2017). "Photo-responsive thiol-ene networks for the design of switchable polymer patterns", Polymer Chemistry, Vol. 8, pp 1562 - 1572,DOI: 10.1039/c7py00055c

Sahin, M., Schlögl, S., Kaiser, S., Kern, W., Wang, J., Grützmacher, H. (03/2017). "Efficient initiation of radical-mediated thiol-ene chemistry with photoactive silica particles.", Journal of Polymer Science Part A: Polymer Chemistry, Vol. 55, pp 894 - 902,DOI: 10.1002/pola.28442

Balasooriya, W., Schrittesser, B., Pinter, G., Schwarz, T. (03/2017). "Einfluss der Alterung auf HNBR in der Erdölindustrie", GAK 2017, Vol. Mrz17, pp 168 - 176

Luef, K. P., Petit C., Ottersböck, B., Oreski, G., Ehrenfeld, F., Grassl, B., Reynaud, S., Wiesbrock, F. (03/2017). "UV-mediated thiol-ene click reactions for the synthesis of drug-loadable and degradable gels based on copoly(2-oxazoline)s, European Polymer Journal, Vol. 88, pp 701 - 712,DOI: 10.1016/j.eurpolymj.2016.08.012

Bulatovic, V. O., Mihaljevic, A., Bajsic, E. G., Holjevac, T. G. (03/2017). "Morphology and thermal behavior of TPU/PP blends modified with maleic anhydride grafted SEBS-g-MA block copolymer", International Polymer Processing, Vol. 32, pp 102 - 111,DOI: 10.3139/217.3291

Urdl, K., Kandelbauer, A., Kern, W., Müller, U., Thebault, M., Zikulnig-Rusch, E. (03/2017). "Self-healing of densely crosslinked thermoset polymers - a critical review", Progress in Organic Coatings, Vol. 104, pp 232 - 249,DOI: 10.1016/j.porgcoat.2016.11.010

Hausberger, A., Krampl, H., Grün, F., Godor, I., Pinter, G., Schwarz, T. (03/2017). "Tribologische Kontaktsimulation elastomerer Dichtungswerkstoffe", Tribologie und Schmierungstechnik, Vol. 64, pp 15 - 24

Poduska, J., Hutar, P., Kucera, J., Sadilek, J., Frank, A., Pinter, G., Nahlik, L. (03/2017). "The effect of residual stress on the process of crack growth rate determination in polymer pipes", Solid State Phenomena, Vol. 258, pp 174 - 177,DOI: 10.4028/www.scientific.net/SSP.258.174

Gschwandl, M., Fuchs, P., Fellner, K., Antretter, T., Krivec, T., Qi, T. (02/2017). "Finite element analysis of arbirtrarily complex electronic devices", Proceedings of the 2016 IEEE 18th Electronics Packaging Technology Conference, EPTC 2016, pp 497 - 500,DOI: 10.1109/EPTC.2016.7861528

Duretek, I., Holzer C. (02/2017). "Material flow data for numerical simulation of powder injection molding", Journal of Physics: Conference Series, Vol. 790, Art. 012007,DOI: DOI: 10.1088/1742-6596/790/1/012007

Haba, D., Hausberger, A., Brunner, A. J. (02/2017). "Flaky and fullerene-like WS2 nanoparticles as tribologic and toughening additives for epoxy", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 231, pp 55 - 61,DOI: 10.1177/1464420716666563

Oesterreicher, A., Moser A., Edler, M., Griesser, H., Schlögl, S., Pichelmayer, M., Griesser, T. (02/2017). "Investigating Photocurable Thiol-Yne Resins for Biomedical Materials"., Macromolecular Materials and Engineering,DOI: 10.1002/mame.201600450

Radl, S., Roppolo, I., Pölzl, K., Ast, M., Spreitz, J., Griesser, T., Kern, W., Schlögl, S., Sangermano, M. (01/2017). "Light triggered formation of photoresponsive epoxy based networks", Polymer, Vol. 109, pp 349 - 357, DOI: 10.1016/j.polymer.2016.12.070

2016

Margossian, A., Bel, S., Avila, Gray, L., Hinterhölzl, R. (12/2016). "Characterisation of Tensile Properties Perpendicular to Fibre Direction of a Unidirectional Thermoplastic Composite using a Dynaic Mechanical Analysis system", Key Engineering Materials, Vols 651 - 653, pp 350 - 355

Sahin, M., Ayalur-Karunakaran, S., Manhart, J., Wolfahrt, M., Kern, W., Schlögl, S. (11/2016). "Thiol-Ene versus Binary Thiol-Acrylate Chemistry: Material Properties and Network Characteristics of Photopolymers". 529. In Adv. Eng. Mater.DOI:10.1002/adem.201600620.

Sahin, M., Schlögl, S., Kaiser, S., Kern, W., Wang, J., Grützmacher, H. (11/2016). "Efficient initiation of radical-mediated thiol-ene chemistry with photoactive silica particles", Journal of Polymer Science Part A: Polymer Chemistry, DOI: 10.1002/pola.284442

Pacher, G. A., Berger, G. R., Friesenbichler, W., Gruber, D. P. (10/2016). " Influence of rapid heat cycle molding and filler type on warpage of injection molded parts out of PP-based compounds", AIP Conference Proceedings, Vol. 1779, Art Nr. 020005

Fasching, M., Friesenbichler, W., Berger, G. R. (10/2016). "Change of processing behavior of rubbers in injection molding caused by material storage", AIP Conference Proceedings, Vol. 1779, Art Nr. 070005

Kukla, C., Duretek, I., Holzer, C. (10/2016). "Controlled shear stress method to measure yield stress of highly filled polymer melts", AIP Conference Proceedings, Vol. 1779, Art Nr. 07006

Primetzhofer, A., Mösenbacher, A., Haslinger, T., Pinter, G. (10/2016). "Concept of fatigue design methodology for short fibre reinforced polymers considering environmental condition", AIP Conference Proceedings, Vol. 1779, Art Nr. 070012

Bredacs, M., Redhead, A., Frank, A., Bastero, A., Pinter, G. (10/2016). "Development and implementation of an accelerated method for chlorine dioxide exposure", AIP Conference Proceedings, Vol. 1779, Art Nr. 070009

Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W., Schlögl, S. (10/2016). "UV-induced modulation of tribological characteristics: Elastomeric materials featuring controlled anisotropic friction properties", AIP Conference Proceedings, Vol. 1779, Art Nr. 080004

Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Kern, W. (10/2016). "Flexible epoxy based composites with enhanced delamination resistance", AIP Conference Proceedings, Vol. 1779, Art Nr. 080007

Manhart, J., Ayalur-Karunakaran, S., Radl, S., Oesterreicher, A., Moser, A., Ganser, C. (10/2016). "Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials bearing pendant anthracene groups" 482. In Data in Brief. DOI:10.1016/j.dib.2016.09.023

Manhart, J., Ayalur-Karunakaran, S., Radl, S., Oesterreicher, A., Moser, A., Ganser, C. (10/2016). "Design and application of photo-reversible elastomer networks by using the [4πs+4πs] cycloaddition reaction of pendant anthracene groups", 483. In Polymer 102, pp. 10–20.DOI:10.1016/j.polymer.2016.08.106.

Ottersböck, B., Oreski, G., Pinter, G. (09/2016). "Correlation study of damp heat and pressure cooker testing on backsheets", Journal of Applied Polymer Science, Vol. 133, p 44230, DOI: 10.1002/app.44230

Poduska, J., Hutar, P., Kucera, J., Frank, A., Sadilek, J., Pinter, G., Nahlik, L. (09/2016). "Residual stress in polyethylene pipes", Polymer Testing, Vol. 54, pp 288 - 295

Moser, A., Feuchter, M. (09/2016). "Mechanical Properties of Composites Used in High-Voltage Applications", Polymers, Vol 2016, 11 pages

Wiesbrock, F. (09/2016). "Interdisciplinary Approaches towards Materials with Enhanced Properties for Electrical Engineering", Polymers, Vol. 2016, pp 307:1 - 307:2

Thirumalai, S., Hausberger, A., Lackner, J. M., Waldhauser, W., Schwarz, T. (09/2016). "Effect of the type of elastomeric substrate on the microstructural, surface and tribological characteristics of diamond-like carbon (DLC) coatings", Surface and Coatings Technology, Vol. 302, pp 244 - 254, DOI: 10.1016/j.surfcoat.2016.06.021

Hirschl, Ch., Neumaier, L., Mühleisen, W., Zauner, M., Oreski, G., Eder, G. C., Seufzer, S., Berge, Ch., Rühland, E., Kraft, M. (08/2016). "In-line determination of the degree of crosslinking of ethylene vinyl acetate in PV modules by Raman spectroscopy", Solar Energy Materials and Solar Cells, Vol. 152, pp 10 - 20, doi: 10.1016/j.solmat.2016.03.019

Oesterreicher, A.,  Gorsche, C. Ayalur-Karunakaran, S., Moser, A., Edler, M., Pinter, G., Schlögl, S., Liska, R., Griesser, T.  (08/2016). "Exploring Network Formation of Tough and Biocompatible Thiol-yne Based Photopolymers". 469. In Macromol. Rapid Commun.DOI:101002/marc.201600369

Haba, D., Barbezat, M., Ayalur-Karunakaran, S., Schlögl, S., Brunner, A. J., Pinter, G. (06/2016). "Significance of epoxy network properties for the toughening effect of flaky and fullerene-like WS2 nanoparticles", Journal of Polymer Science, Part B: Polymer Physics, online, 10 pages,DOI: 10.1002/polb.24077

Gonzalez-Gutierrez, J., Duretek, I., Kukla, C., Poljsak, A., Bek, M., Emri, I., Holzer, C. (06/2016). "Models to predict the viscosity of metal injection molding feedstock materials as function of their formulation", Metals, Vol. 6, Artn. Nr. 129

Margossian, A., Bel, S., Hinterhölzl, R. (06/2016). "On the characterisation of transverse tensile properties of molten unidirectional thermoplastic composite tapes for thermoforming simulations", Composites: Part A, Vol. 88, pp 48 - 58

Kochetov, R., Tsekmes, I.A., Morhius, P.H.F., Smit, J.J., Wanner, A.J., Wiesbrock,F., Kern,W. (06/2016). "Effect of Water Absorption on Dielectric Spectrum of Nanocomposites", 2016 Electrical Insulation Conference (EIC) Proceeding, pp 579 - 582

Arbeiter, F. J., Frank, A., Pinter, G. (06/2016). "Influence of molecular structure and reinforcement on fatigue behavior of tough polypropylene materials", Journal of Applied Polymer Science, Vol. 133 (38), pp 43948 - 43948 (16 pages), DOI: 10.1002/app.43948

Andraschek, N., Wanner, A.J., Ebner, C.M., Riess, G. (06/2016). "Mica/Epoxy Composites in the Electrical Industry: Applications, Composites for Insulations, and Investigations on Failure Mechanisms for Prospective Optimizations", Polymers, Vol. 8, 23 pages, doi:10.3390/polym8050201

Oesterreicher, A., Ayalur-Karunakaran, S., Moser, A., Mostegel, F. H., Edler, M., Kaschnitz, P., et al. (06/2016). "Exploring thiol-yne based monomers as low cytotoxic building blocks for radical photopolymerization", 470. In J. Polym. Sci. Part A: Polym. Chem. 54 (21), pp. 3484–3494.DOI:10.1002/pola.28239.

Plesa, I., Notingher, P. V., Schlögl, S., Sumereder, C., Muhr, M. (04/2016). "Properties of polymer composites used in high-voltage applications", Polymers, Vol. 8, Art. Nr. 173, DOI: 10.3390/polym8050173

Niegelhell, K., Leimgruber, S., Grießer, T., Brandl, C., Chernev, B., Schennach, R., Trimmel, G., Spirk, S. (03/2016). "Adsorption Studies of Organophosphonic Acids on Differently Activated Gold Surfaces", Langmuir, Vol. 32, pp 1550 - 1559, DOI: 10.1021/acs.langmuir.5b04467

Primetzhofer, A., Mösenbacher, A., Haslinger T., Pinter, G. (03/2016). "Concept of Fatigue Design Methodology for short fibre reinforced Polymers considering Environmental Conditions", AIP, 5 Seiten, submitted

Wiesbrock, F., Griesser, T. (03/2016). "Leitfähige Polymere", Plus lucis, Vol 2016, pp 49 - 51

Fimberger, M., Behrendt, A., Jakopic, G., Stelzer, F., Kumbaraci, V., Wiesbrock, F. (03/2016). "Modification Pathways for Copoly(2-oxazoline)s Enabling Their Application as Antireflective Coatings in Photolithography", Macromolecular rapid communications, Vol. 2016, 37, pp 233 - 238,DOI: 10.1002/marc.201500589

Fimberger, M., Tsekmes, I.-A., Kochetov, R., Smit, J. J., Wiesbrock, F. (03/2016). "Crosslinked Poly(2-oxazoline)s as "Green" Materials for Electronic Applications", Polymers, Vol. 2016, 8 (1), pp 6:1 - 6:12, DOI: 10.3390/polym8010006

Fellner, K., Antretter, T., Fuchs, P. F., Pélisset, T. (02/2016). "Cyclic mechanical behavior of thin layers of copper: A theoretical and numerical study", Journal of Strain Analysis for Engineering Design, Vol. 51, pp 161 - 169, DOI: 10.1177/0309324715618863

Mostafa, A., Laske, S., Pacher, G., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. (02/2016). "Blast furnace slags as functional fillers on rheological, thermal, and mechanical behavior of thermoplastics", Journal of Applied Polymer Science, Vol. 133, article number 43021, DOI: 10.1002/app.43021

Geissler, B., Feuchter, M., Laske, S., Fasching, M., Holzer, C., Langecker, G. R. (01/2016). "Strategies to improve the mechanical properties of high-density polylactic acid foams", Journal of Cellular Plastics, Vol. 52, pp 15 - 35, DOI: 10.1177/0021955X14538274

Schrittesser, B., Pinter, G., Schwarz, T., Kadar, Z., Nagy, T. (01/2016). "Impact of the acrylonitrile content on the mechanical performance of elastomeric materials", Rubber Fibres Plastics, Vol. Jan 16, pp 40 - 4

2015

Radl, S., Kreimer, M., Oesterreicher, A., Griesser, T., Moser, A., Kern, W., Schlögl, S. (12/2015). "New strategies towards reversible and mendable epoxy based materials employing [4ps + 4ps] photocycloaddition and thermal cycloreversion of pendant anthracene groups", Polymer, Vol 80, pp 76 - 87, DOI: 10.1016/j.polymer.2015.10.043

Bomze, D., Knaack, P., Liska, R. (12/2015). "Successful radical induced cationic frontal polymerization of epoxy-based monomers by C-C labile compounds", Polymer Chemistry, Vol 6, pp 8161 - 8167

Ligon, S., Schwentenwein, C., Gorsche, J., Stampfl, J., Liska, R. (12/2015), "Toughening of photo-curable polymer networks: a review", Polymer Chemistry, Vol 7, pp 257 - 286

Manhart, J., Kramer, R., Schaller, R., Holzner, A., Kern, W., Schlögl, S. (12/2015), "Surface functionalization of natural rubber by UV-induced thiol-ene chemistry", Macromolecular Symposia, Polychar 23, DOI: 10.1002/masy.201650016

Primetzhofer, A., Mösenbacher, A., Haslinger, T., Pinter, G. (12/2015). "Concept of Fatigue Design Methodology for short fibres reinforced Polymers considering Environmetal Conditions", AIP, 5 pages

Fellner, K., Antretter, T., Fuchs, P. F., Tao, Q. (12/2015). "Numerical simulation of the electrical performance of PCBs under cyclic thermal loads", Microelectronics Reliabilty, in press, doi:10.1016/j.microrel.2016.03.034

Schwab, M., Todt, M., Wolfahrt, M., Pettermann, H. E. (12/2015). "Failure mechanism based modelling of impact on fabric reinforced composite laminates based on shell elements", Composite Science and Technology, Vol. 128, pp 131 - 137, DOI: 10.1016/j.compscitech.2016.03.025

Cichosz, T., Wehrkamp-Richter, T., Koerber, H., Hinterhoelzl, R., Camanho, P. P. (12/2015). "Failure and Damage Characterization of Biaxial Braided Composites Under Multiaxial Stress States", Composites Part A (submitted)

Schrittesser, B., Pinter, G., Schwarz, Th. Kadar, Z. Nagy, T. (12/2015). "Einfluss des Acrylnitril-Gehalts auf die mechanischen Eigenschaften von Elastomeren Werkstoffen", Gummi, Fasern, Kunststoffe, Vol 68-11, pp 750 - 758

Major, Z., Hutar, P., Frank, A., Náhlik, L., Zouhar, M., Pinter, G. (12/2015). "Point load effect on the buried polyolefin pipes lifetime", Polymer Engineering and Science, Vol 56, pp 79 - 86

Brunbauer, J., Pinter, G. (12/2015). "Effects of mean stress and fibre volume content on the fatigue-induced damage mechanisms in CFRP", International Journal of Fatigue, Vol 75, pp 28 - 38, DOI: 10.1016/j.ijfatigue.2015.01.014

Mikula, J., Hutar, P., Nezbedová, E., Lach, R., Arbeiter, F., Sevcik, M., Pinter, G., Grellmann, W., Náhlik, L. (12/2015). "On crack propagation in the welded polyolefin pipes with and without the presence of weld bead", Materials and Design, Vol 87, pp 95 - 104, DOI: 10.1016/j.matdes.2015.07.131

Petit, C., Luef, K. P., Edler, M., Griesser, T., Kremsner, J. M., Stadler, A., Grassl, B., Reynaud, S., Wiesbrock, F. (10/2015). "Microwave-Assisted Syntheses in Recyclable Ionic Liquids: Photoresits Based on Renewable Resources", ChemSusChem, Vol 8, pp 3401 - 3404,DOI: 10.1002/cssc.201500847

Wolfahrt, M., Grosser, J., Fleischmann, M., Schubert, M. (9/2015). "Characterization of the mechanical and fatigue behavior of braided composites made of twisted yarns", Materials science Forum, pp 876 - 882, DOI: 10.4028/www.scientific.net/MSF.825-826.876

Fimberger, M., Wiesbrock, F. (9/2015). "Microwave-assisted synthesis of polyesters and polyamides by ring-opening polymerizations", Advances in polymer Science, doi: 10.1007/12_2014_293

Wiesbrock, F. (9/2015). "Green Chemistry in Niche Applications: Development of "Green" Photoresists". Organic chemistry: current research, p 43

Walluch, M., Uray, A., Laske, S., Holzer, C., Langecker, G. (9/2015). "Some Influence Factors of Chemical Blowing Agents on the Foam Morphology in Foam Extrusion". Conference proceddings, PPS 2015, p 275

Schlögl, S., Lenko, D. (9/2015). "High-voltage insulation with enhanced delamination resistance". Fiber Reinforced Plastics, 3 pages

Radl, S., Kreimer, M., Manhart, J., Griesser, T., Moser, A., Pinter, G., Kalinka, G., Kern, W., Schlögl, S. (9/2015). "Photocleavable epoxy based materials". Polymer, pp 159 - 168, DOI: 10.1016/j.polymer.2015.05.055

Luef, K. P., Stelzer, F., Wiesbrock, F. (9/2015). "Poly(hydroxy alkanoate)s in Medical Applications". Chemical and biochemical engineering quarterly, pp 287 - 297, DOI: 10.15255/CABEQ.2014.2261

Luef, K. P., Hoogenboom, R., Schubert, U. S., Wiesbrock, F. (9/2015). "Microwave-assisted cationic ring-opening polymerization of 2-oxazolines", Advances in polymer science, doi: 10.1007/12_2015_340

Fimberger, M., Luef, K. P., Payerl, C., Fischer, R., Stelzer, F., Kallay, M., Wiesbrock, F. (9/2015). "The p-Electron Delocalization in 2-Oxazolines Revisited: Quantification and Comparison with Its Analogue in Esters." Materials, pp 5385 - 5397, DOI: 10.3390/ma8085249

Davoodi, B., Muliana, A., Tscharnuter, D., Pinter, G. (9/2015). "Analyses of viscoelastic solid polymers undergoing degradation". Mechanics of Time-Dependent Materials, pp 397 - 417, DOI: 10.1007/s11043-015-9270-z

Berer, M., Tscharnuter, D., Pinter, G. (9/2015). "Dynamic mechanical response of polyetheretherketone (PEEK) exposed to cyclic loads in the high stress tensile regime". International Journal of Fatigue, pp 397 - 405, DOI: 10.1016/j.ijfatigue.2015.06.026

Hirschl, Ch., Neumaier, L., Puchberger, S., Mühleisen, W., Oreski, G., Eder, G. C., Frank, R., Tranitz, M., Schoppa, M., Wendt, M., Bogdanski, N., Plösch, A., Kraft, M. (8/2015). "Determination of the degree of ethylene vinyl acetate crosslinking via Soxhlet extraction: Gold standard or pitfall?", Solar Energy Materials and Solar Cells, pp 494 - 502, Doi: 10.1016/j.solmat.2015.07.043

Bruckmoser, K., Resch, K., Kisslinger, T., Lucyshyn, T. (8/2015). "Measurement of interdiffusion in polymeric materials by applying Raman spectroscopy", Polymer Testing, pp 122 - 133, doi: 10.1016/j.polymertesting.2015.07.004

Gager, J., Pettermann, H. E. (8/2015). "FEM modeling of multilayered textile composites based on shell elements", Composites B, Vol 77, pp 46 - 51,DOI: 10.1016/j.compositesb.2015.03.023

Knausz, M., Oreski, G., Schmidt, M., Guttmann, P., Berger, K., Voronko, Y., Eder, G., Koch, T., Pinter, G. (7/2015). "Thermal expansion behavior of solar cell encapsulation materials", Polymer Testing, pp 160 - 167, Doi: 10.1016/j.polymertesting.2015.04.009

Chassé, W., Schlögl, S., Riess, G., Saalwächter, K. (6/2015). "Erratum: Inhomogeneities and local chain stretching in partially swollen networks (Soft Matter (2013) 9 (6943-6954))". Soft Matter, Vol. 11, pp 4337 - 4338, DOI: 10.1039/c5sm90081f

Mostegel, F.H., Drucker, R.E., Rieger, P.H., El Zubir, O., Yia, S., Radls, S.V., Edler, M., Cartron, M.L., Hunter, C.N., Leggett, G.J., Griesser,T. (6/2015). "Versatile thiol-based reactions for micrometer-and nanometer-scale photopatterning of polymers and biomolecules". Journal of Materials Chemistry B, Vol. 3, pp 4431 - 4438, DOI: 10.1039/c5tb00345h

Davoodi, B., Muliana, A., Tscharnuter, D., Pinter, G. (6/2015). "Analyses of viscoelastic solid polymers undergoing degradation". Mechanics of Time-Dependent Materials, pp. 663 - 684, DOI: 10.1007/s11043-015-9270-z

Brunbauer, J., Gaier, C., Pinter, G. (6/2015). "Computational fatigue life prediction of continuously fibre reinforced multiaxial composites". Composites Part B: Engineering, Vol. 80, pp 269 -277, DOI: 10.1016/j.compositesb.2015.06.002

Klein, A., Resch, K., Oreski, G. (6/2015). "Bioplastics for Solar Thermal Applications: Potential of Bio-PE and PTT for Swimming Pool Solar Collectors". SPE ANTEC TM Orlando 2015, Vol. 1, pp 200 - 204

Arbeiter, F., Schrittesser, B., Frank, A., Berer, M., Pinter, G. (6/2015). "Cyclic tests on cracked round bars as a quick tool to assess the long term behaviour of thermoplastics and elastomers". Polymer Testing, Vol. 45, pp 83 - 92, DOI: 10.1016/j.polymertesting.2015.05.008

Margossian, A., Bel, S., Hinterhoelzl, R. (6/2015). "Bending characterisation of a molten unidirectional carbon fibre reinforced". Composites: Part A

Arbeiter, F., Schrittesser, B ., Frank, A., Berer, M., Pinter, G. (6/2015). "Determination of slow crack growth behaviour of polyethylene pressure pipes with cracked round bar test". Polymer Testing, Vol. 45 (2015), pp 83 - 92

Leimgruber, S., Kern, W., Hochenauer, R., Melmer, M., Holzner, A., Trimmel, G. (6/2015). "Investigation of the Rubber-Brass Adhesion Layer Using the Olefin-Metathesis Method". Rubber Chemistry and Technology, Vol. 88, pp 219 - 233

Leimgruber, S., Trimmel, G. (6/2015). "Olefin etathesis meets rubber chemistry and technology". Monatshefte der Chemie, Vol 7, pp 1081 - 1097,DOI: 10.1007/s00706-015-1501-0

Radl, S., Kreimer, M., Manhart, J., Griesser, T., Moser, A., PInter, G., Kalinka, G., Kern, W., Schlögl, S. (6/2015). "Photocleavable epoxy based materials". Polymer, Vol 69, pp 159 - 169, DOI: 10.1016/j.polymer.2015.05.055

Luef, K. P., Stelzer, F., Wiesbrock, F. (6/2015). "Poly(hydroxy alkanoate)s in Medical Applications", Chemical and biochemical engineering quarterly, Vol.29(2), pp 25 - 35, DOI: 10.15255/CABEQ.2014.2261

Brunbauer, J., Pinter, G. (3/2015). "Fatigue life prediction of carbon fibre reinforced laminates by using cycle-dependent classical laminate theory", Composites Part B: Engineering, Vol 70, pp 167 - 174, DOI: 10.1016/j.compositesb.2014.11.015

Perko, L., Fasching, M., Friesenbichler, W. (3/2015). "Model for the prediction of bulk temperature changes and pressure losses in rubber compounds flowing through conical dies: An engineering approach", Polymer Engineering and Science, Vol. 55, pp 701 - 709 (DOI: 10.1016/j.polymer.2015.05.055)

Brunbauer, J., Pinter, G. (3/2015). "Fatigue-life prediction of carbon fibre reinforced laminates by using cycle-dependend classical laminate theory", Composites Part B: Engineering 70 (2015) 167 - 174 (DOI: 10.1016/j.compositesb.2014.11.015)

Haubenwallner, S., Katschnig, M., Fasching, U., Patz, S., Trattnig, C., Andraschek, N., Grünbacher, G., Absenger, M., Laske, S., Holzer, C., Balika, W., Wagner, M., Schäfter, U. (1/2015). "Effects of the polymeric niche on neural stem cell characteristics during primary culturing", Journal of Materials Science: Materials in Medicine, Vol. 25, pp 1339 - 1355

Manhart, J., Lenko, D., Mühlbacher, I., Hausberger, A., Schaller, R., Holzner, A., Kern, W., Schlögl, S. (1/2015). "Photo-patterned natural rubber surfaces with tunable tribological properties", European Polymer Journal, Vol. 66, pp 236 - 246 (DOI: 10.1016/j.eurpolymj.2015.02.024)

Gruber, D. P., Winkler, G., Resch, K. (1/2015). "Comprehensive study on the light shielding potential of thermotropic layers for the development of new materials", Applied Optics, Vol. 54, pp 150 - 156

Kratochvilla, T. R., Frank, A., Pinter, G. (1/2015). "Determination of slow crack growth behaviour of polyethylene pressure pipes with cracked round bar test", Polymer Testing, Vol. 2014, pp 299 - 303

Knapp, G., Oreski, G., Pinter, G. (1/2015). "Method to characterize the damping behavior of thin passively constrained layer laminates using dynamic mechanical analysis (DMA) in shear mode", Polymer Testing. Vol. 42, pp 215 - 224 (DOI: 10.1016/j.polymertesting.2015.01.011)

Fellner, K., Antretter, T., Fuchs, P. F., Pélisset, T. (1/2015). "Modelling of the cyclic mechanical properties of thin copper layers", submited to the Journal of Strain Analysis for Engineering Design

Jölly, I., Schlögl, S., Wolfahrt, M., Pinter, G., Fleischmann, M., Kern, W. (1/2015). "Chemical functionalization of composite surfaces for improved structural bonded repairs", Composites: Part B., Vol. 69, pp 296 - 303 (DOI: 10.1016/j.compositesb.2014.10.020)

Kratochvilla, T. R., Frank, A., Pinter, G. (1/2015). "Determination of slow crack growth behaviour of polyethylene pressure pipes with cracked round bar test", Polymer Testing, Vol. 40, pp 299 - 303

Voronko, Y., Eder, G., Knausz, M., Oreski, G., Koch, T., Berger, K. (1/2015). "Correlation of the loss in photovoltaic module performance with the ageing behaviour of the backsheets used", Progress in Photovoltaics: Research and Applictations, 10.1002/pip.2580 (DOI: 10.1002/pip.2580)

Knausz, M., Oreski, G., Eder, G., Voronko, Y., Duscher, B., Koch, T., Pinter, G., Berger, K. (1/2015). "Degradation of photovoltaic backsheets: Comparison of the aging induced changes an module an component level", Journal of Applied Polymer Science, Vol. 132, 10.1002/app.42093 (DOI: 10.1002/app.42093)

Brunbauer, J., Pinter, G. (1/2015). "On the strain measurement and stiffness calculation of carbon fibre reinforced composites under quasi-static tensile and tension-tension fatigue loads", Polymer Testing, Vol. 40, pp 256 - 265

Brunbauer, J., Stadler, H., Pinter, G. (1/2015). "Mechanical properties, fatigue damage and microstructure of carbon/epoxy laminates depending on fibre volume content", International Journal of Fatigue, Vol. 70, pp 85 - 92

Brunbauer, J., Arbeiter, F., Stelzer, S., Pinter, G. (1/2015). "Stiffness Based Fatigue Characterisation of CFRP", Advanced Material Research, Vol. 891 - 892, pp 166 - 171

Muliana, A., Rajagopal, K. R., Tscharnuter, D. (1/2015). "A nonlinear integral model for describing responses of viscoelastic solids", Source of the Document Interantio Journal of Solids and Structures, Vol. 58, pp 146 - 156 (DOI: 10.1016/j.ijsolstr.2014.12.026)

Brunbauer, J., Pinter, G. (2015). "Effects of mean stress and fibre volume content on the fatigue-induced damage mechanisms in CFRP", International Journal of Fatigue, Vol. 75, pp 28 - 38 (DOI: 10.1016/j.ijfatigue.2015.01.014)

2014

Jölly, I., Schlögl, S., Wolfahrt, M., Pinter, G., Fleischmann, M., Kern, W. (12/2014). "Chemical functionalization of composite surfaces for improved structural bonded repairs", Composites Part B: Engineering (DOI: 10.1016/j.compositesb.2014.10.020)

Manhart, J., Darya, D. (12/2014). "Photoreversible crosslinking of elastomer materials", 3rd European Symposium of Photopolymer Science, OP-60

Stloukal, P., Kalendova, A., Mattausch, H., Laske, St., Holzer, C., Koutny M. (12/2014). "The influence of a hydrolysis-inhibiting additive on the degradation and biodegradation of PLA and its nanocomposites", Polymer Testing, pp. 124 - 132

Gruber, D. P., Winkler, G., Resch, K. (12/2014). "Comprehensive study on the light shielding potential of thermotropic layers for the development of new materials", Applied Optics, pp. 150 - 156

Kratochvilla, T. R., Frank, A., Pinter, G. (12/2014). "Determination of slow crack growth behaviour of polyethylene pressure pipes with cracked round bar test", Polymer Testing, pp. 299 - 303

Knapp, G., Leyrer, M., Oreski, G., Pinter, G. (12/2014). "Characterization of the damping behavior of thin films with dynamic mechanic analysis in bending mode", Proceedings of ASME 2014, International Mechanical Engineering Congress & Exposition (DOI: 10.1115/IMECE2014-38279)

Jölly, I., Schlögl, S., Wolfahrt, M., Pinter, G., Fleischmann, M., Kern, W. (12/2014). "Chemical functionalization of composite surfaces for improved structural bonded repairs", Composites: Part B, pp. 296 - 303 (DOI: 10.1016/j.compositesb.2014.10.020)

Berer, M., Major, Z., Pinter, G., Constantinescu, D. M., Marsavina, L. (12/2014). "Investigation of the dynamic mechanical behavior of polyetheretherketone (PEEK) in the high stress tensile regime", Mechanics of Time-Dependent Materials, pp. 663 - 684 (DOI: 10.1007/s11043-013-9211-7)

Weber, A., Resch, K. (12/2014). "Thermotropic systems with fixed domains exhibiting enhanced overheating protection performance", Journal of Applied Polymer Science (DOI: 10.1002/app.40417)

Weber, A., Resch, K. (12/2014). "Thermotropic overheating protection glazings: effect of functional additives and processing conditions on light-shielding efficiency", Journal of Polymer Engineering (DOI: 10.1515/polyeng-2013-0275)

Brunbauer, J., Arbeiter, F., Stelzer, S., Pinter, G. (12/2014). "Stiffness based fatigue characterisation of CFRP", Advanced Material Research Vols. 891 - 892 (2014) 166 - 171

Brunbauer, J., Mösenbacher, A., Guster, C., Pinter, G. (12/2014). "Fundamental influences on quasistatic and cyclic matrial behaviour of short glass fibre reinforced polyamide illustrated on microscopic scale", Journal of Applied Polymer Science 131 (2014) 19 1 - 14

Dunst, S., Rath, T., Moscher, S., Troi, L., Edler, M., Griessner, T., Trimmel, G. (11/2014) "Influence of TiOx and Ti cathode interlayers on the performance and stability of hybrid solar cells", Solar Energy Materials and Solar Cells, pp. 217-224

Koller, M., Muhr, A., Braunegg, G. (10/2014) "Microalgae as versatile cellular factories for valued products (Review)", Algal Research, Vol 6, pp 52 - 63

Macher, J., Gruber, D., Altenbuchner, T., Pacher, G., Berger, G., Friesenbichler, W. (10/2014). "A novel sink mark model for high gloss injection molded parts - Correlation of deflectometric and topographic measurements", Polymer Testing, 39, pp. 12 - 19

Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Kern, W. (9/2014). "Flexible Epoxy-Silicone rubber laminates for high voltage insulations with enhanced delamination resistance", Polymer Composites, 10 Seiten

Brunbauer, F., Stadler, H., Pinter, G. (9/2014). "Mechanical properties, fatigue damage and microstructure of carbon/epoxy laminates depending on fibre volume content", International Journal of Fatigue, vol. 70, pp. 85 - 92

Brunbauer, J., Pinter, G. (9/2014). "On the strain measurement and stiffness calculation of carbon fibre reinforced composties under quasi-static tensile and tension-tension fatigue loads", Polymer Testing

Hirschmann, B., Oreski, G., Pinter, G. (9/2014). "Thermo-mechanical characterisation of fluoropolymer films for concentrated solar thermal applications", Solar Energy Materials & Solar Cells, vol. 130, pp. 615 - 622 (DOI: 10.1016/j.solmat.2014.08.013)

Kratochvilla, T. R., Frank, A., Pinter, G. (9/2014). "Determination of slow crack growth behaviour of polyethylene pressure pipes with cracked round bar test", Polymer Testing (DOI: 10.1016/j.polymertesting.2014.10.002)

Berer, M., Pinter, G., Feuchter, M. (9/2014). "Fracture Mechanical Analysis of Two Commercial Polyoxymethylene Homopolymer Resins", Journal of Applied Polymer Science, vol. 19, pp.15 (DOI: 10.1002/app.40831)

Jölly, I., Schlögl, S., Wolfahrt, M., Pinter, G., Fleischmann, M., Kern, W. (9/2014). "Chemical functionalization of composite surfaces for improved structural bonded repairs", Composites: Part B (DOI: 10.1016/j.compositesb.2014.10.020)

Manhart, J., Fleischmann, D.D., Ayalur-Karunakaran,S., Griesser, T., Oesterreicher, A., Kern, W., Schlögl, S. (9/2014). "Photoreversible Crosslinking of Elastomer Materials", 3rd European Symposium of Photopolymer Science, ISBN 978-3-9502992-9-8, OP-60

Arbeiter, F., Pinter, G., Frank, A. (8/2014). "Characterisation of quasi-brittle fatigue crack growth in pipe grade polypropylene block copolymer", Polymer Testing (DOI: 10.1016/j.polymertesting.2014.05.016)

Macher, J., Gruber, D., Altenbuchner, T., Pacher, G., Berger, G., Friesenbichler, W. (6/2014). "Detection of Visually Perceptible Sink Marks on High Gloss Injection Molded Parts by Phase Measuring Deflectometry", Polymer Testing, vol. 34, pp. 42 - 48. (DOI: 10.1016/j.polymertesting.2013.12.008)

Schlögl, D., Trutschel, M., Chassé, W., Letofsky-Papst, I., Schaller, R., Holzner, A., Riess, G., Kern, W., Saalwächter, K. (6/2014). "Photo-Vulcanization using thiol-ene chemistry: Film formation, morphology and network characteristics of UV crosslinked rubber latices", Polymer. (DOI: 10.1016/j.polymer.2014.06.007)

Berer, M., Pinter, G., Feuchter, M. (6/2014). "Fracture Mechanical Analysis of Two Commercial Polyoxymethylene Homopolymer Resins", Journal of Applied Polymer Science. (DOI: 10.1002/app.40831)

Schlögl, S., Trutschel, M., Chassé, W., Riess, G., Saalwächter, K. (6/2014). "Entanglement Effects in Elastomers: Macroscopic vs Microscopic Properties", Macromolecules, vol. 47 (9). (DOI: 10.1021/ma4026064)

Weber, A., Resch, K. (6/2014). "Thermotropic systems with fixed domains exhibiting enhanced overheating protection performance", Journal of Applied Polymer Science, vol. 131, Issue 12, 15th June 2013, Article number 40417. (DOI: 10.1002/app.40417)

Hutar, P., Sevcik, M., Nahlik, L., Frank, A., Kucera, J., Pinter, G. (2014). "Numerical lifetime prediction of polymer pipes taking into account residual stress", Key Engineering Materials, vol. 577 - 578, 2014, pp. 169  172. (DOI: 10.4028/www.scientific.net/KEM.577-578.169)

Geissler, B., Feuchter, M., Laske, D., Fasching, M., Holzer, C., Langecker, G. (6/2014). "Strategies to improve the mechanical properties of high-density polylactic acid foams", Journal of Cellular Plastics, June 10, 2014.

Berger, K., Gregorova, A. (6/2014). "Thermal Stability of modified end-capped poly(lactic acid)", Journal of Applied Polymer Science.

Dunst, S., Rath, T., Radivo, A., Sovernigo, E., Tormen, M., Amenitsch, H. (5/2014). "Nanoimprinted comb structures in a low bandgap polymer: Thermal processing and their application in hybrid solar cell", ACS Applied Materials and Interfaces, vol. 6, Issue 10, 28th May 2014, pp. 7633 - 7642. (DOI: 10.1021/am5009425)

Fradler, C., Rath, T., Dunst, S., Letofsky-Papst, I., Saf, R., Kunert, B., Hofer, F., Resel, R., Trimmel, G. (5/2014). "Flexible polymer/copper indium sulfide hybrid solar cells and modules based on the metal xanthate route and low temperature annealing", Solar Energy Materials and Solar Cells, vol. 124, pp. 117 - 125. (DOI: 10.1016/j.solmat.2014.01.043)

Weber, A., Resch, K. (4/2014). "Thermotropic overheating protection glazings: Effect of functional additives and processing conditions on the overheating protection performance", Journal of Polymer Engineering, vol. 34, Issue 2, pp. 161 -- 172. (DOI: 10.1515/polyeng-2013-0275)

Fimberger, M., Schenk, V., Rossegger, E., Wiesbrock,F. (3/2014). "UV-Induced Crosslinking of Poly[2-(2'Norbornenyl)-2-Oxazoline]s", Periodica polytechnica / Chemical engineering, vol. 58., pp. 69 - 74. (DOI: 10.3311/PPch.7206)

Frank, A., Pinter, G. (3/2014). "Evaluation of the applicability of the cracked round bar test as standardized PE-pipe ranking tool", Polymer Testing, vol. 33, pp. 161-171.

Gruber, D., Macher, J., Haba, D., Berger, G., Pacher, G., Friesenbichler, W. (3/2014). "Measurement of the visual perceptibility of sink marks on injection molding parts by a new fast processing model", Polymer Testing, vol. 33, pp. 7 - 12.

Koller, M., Muhr, A. (3/2014). "Continuous Production as a Viable Process-Engineering Tool for Efficient Poly(hydroxylalkanoate) (PHA) Bio-Production", Chemical and Biochemical Engineering Quarterly, Vol 28, pp 65 - 77

Schenk, V., Rossegger, E., Ebner, C., Bangerl, F., Reichmann, K., Hoffmann, B., Höpfner, M., Wiesbrock, F., (3/2014). "RGD-Functionalization of Poly(2-oxazoline)-Based Networks for Enhanced Adhesion to Cancer Cells", Polymers, vol. 6, pp. 264 - 279. (DOI: 10.3390/polym6020264)

Stelzer, S., Brunner, A.J., Argüelles, A., Murphy, N., Cano, G.M., Pinter, G. (3/2014). "Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Results from ESIS TC4 round-robins", Engineering Fracture Mechanics. (DOI: 10.1016/j.engfracmech.2013.12.002)

Woods, R., Feldbacher, S., Zidar, D., Langer, G., Satzinger, V., Schmidt, V., Pucher, N., Liska, R., Kern, W. (3/2014). "3D opitcal waveguides produced by two photon photopolymerisation of a flexible silanol terminated polysiloxane containing acrylate functional group", Opitcal Materials Express, vol. 4, Issue 3, pp. 486 - 498. (DOI: 10.1364/OME.4.000486)

Radl, S.V., Roth, M., Gassner, M., Wolfberger, A., Lang, A., Hirschmann, B., Trimmel, G., Kern, W., Griesser, T. (3/2014). "Photo-induced crosslinking and thermal de-crosslinking in polynorbornenes bearing pendant anthracene groups", European Polymer Journal, vol. 52, Issue 1, pp. 98 - 104. (DOI: 10.1016/j.eurpolymj.2013.10.024)

Berer, M., Major, Z., Pinter, G., Constantinescu, D.M., Marsavina, L. (3/2014). "Cyclic loading of polyetheretherketone at high tensile stress levels", Key Engineering Materials, vol. 601, 2014, pp. 12 - 16. (DOI: 10.4028/www.scientific.net/KEM.601.12)

Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Rosc, J., Kern, W. (1/2014). "New approaches towards the investigation on defects and failure mechanisms of insulatiing composites used in high voltage applications", Composites Part B: Engineering, vol. 58, pp. 83 - 90 (DOI: 10.1016/j.compositesb.2013.10.018)

Weber, A., Resch, K. (1/2014). "Thermotropic glazings for overheating protection. I. Material preselection, formulation, and light-shielding efficiency", Journal of Applied Polymer Science, pp. 39950 (1 - 13). (DOI: 10.1002/app.39950)

Weber, A., Schmid, A., Resch, K. (1/2014). "Thermotropic glazings for overheating protection. II. morphology and strucutre-property relationships", Journal of Applied Polymer Science, pp. 39910 (1 - 13). (DOI: 10.1002/app.39910)

2013

Berger, G.R., Rook, S., Steinbichler, G., Giessauf, J., Gruber, D.P., Friesenbichler, W. (12/2013). "More gloss, fewer weld lines with variothermal molding", Plastics Technology, vol. 59 (3), pp. 30-35 + 60-62.

Brunner, A.J., Stelzer, S., Pinter, G., Terrasi, G.P. (12/2013). "Mode II fatigue delamination resistance of advanced fiber-reinforced polymer-matrix laminates: Towards the devolpment of a standardized test procedure", International Journal of Fatigue, vol. 50, pp. 57-62. (DOI: 10.1016/j.ijfatigue.2012.02.021)

Fuchs, P.F., Pinter, G., Major, Z. (12/2013). "PCB drop test lifetime assessment based on simulations and cyclic bend tests", Microelectronics Reliability, vol. 53 (5), pp. 774-781. (DOI: 10.1016/j.microrel.2013.01.001)

Griesser, T., Wolfberger, A., Daschiel, U., Schmidt, V., Jerrar, A., Teichert, C., Kern, W., Fian, A. (12/2013). "Cross-linking of ROMP derived polymers using the two-photon induced thiol-ene reaction: Towards the fabrication of 3D-polymer microstructures", Polymer Chemestry, vol. 4 (5), pp. 1708-1714. (DOI: 10.1039/c2py21002a)

Hirschl, C., Biebl-Rydlo, M., Debiasio, M., Mühleisen, W., Neumaier, L., Scherf, W., Oreski, G., Eder, G., Chernev, B., Schwab, W., Kraft, M. (12/2013). "Determining the degree of crossliking of ethylene vinyl acetate photovoltaic module encapsulants - A comparative study", Solar Energy Materials and Solar Cells, vol. 116, pp. 203-218. (DOI: 10.1016/j.solmat.2013.04.022)

Hutar, P., Sevcik, M., Frank, A., Nahlik, L., Kucera, J., Pinter, G. (12/2013). "The effect of residual stress on polymer pipe lifetime", Engineering Fracture Mechanics, vol. 108, pp. 98-108. (DOI: 10.1016/j.engfracmech.2013.04.014)

Kahlen, S., Wallner, G.M., Lang, R.W. (12/2013). "Structural Polymeric Materials-Aging Behavior of Solar Absorber Materials", Polymeric Materials for Solar Thermal Applications, pp. 243-253. (DOI: 10.1002/9783527659609.ch14)

Muhr, N., Puchleitner, R., Kern, W. (12/2013). "Nanoparticals bearing a photoreactive shell: Interaction with polymers and polymer surfaces", European Polymer Journal, vol. 49 (10), pp. 3114-3124. (DOI: 10.1016/j.eurpolymj.2013.07.010)

Schöngrundner, R., Cordill, M.J., Berger, J., Krückl, H.-P., Fellner, K., Krivec, T., Kurz, M., Fuchs, P.F., Maier, G.A. (12/2013). "Adhesion of printed circuit boards with bending and the effect of reflow cycles", 2013 14th International Conference on Thermal, Mechanicals and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013, art. No. 6529919. (DOI: 10.1109/EuroSimE.2013.6529919)

Hausberger, A., Godor, I., Grün, F., Pinter, G., Schwarz, T. (11/2013). "Vom tribologischen Modellversuch zur Bauteilprüfung", In Proc. "22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie", pp. 150 - 157.

Fimberger, M., Schenk, V., Rossegger, E., Wiesbrock, F. (9/2013). "Poly(2-Oxazoline)-based Toolkit for High-Resolution-Photoresists with Tailor-made Adhesion", in "Advances in Polymer Science and Technology", pp. 20.

Rossegger, E., Schenk, V., Wiesbrock, F. (9/2013). "Design Strategies for Functionalized Poly(2-Oxazoline)s and Derived Materials", polymers, vol. 5, pp. 956-1011. (DOI: 10.3390/polym5030956)

Tscharnuter, D., Muliana, A., Pinter, G. (9/2013). "Nonlinear viscoelastic response of polyoxymethylene", in Proc. "Schriftenreihe Advances in Polymer Science and Technology - APST 3", pp. 67.

Weber, A., Schlögl, S., Resch, K. (9/2013). "Effect of Formulation and Processing Conditions on Light Shielding Efficiency of Thermotropic Systems with Fixed Domains Based on UV Curing Acrylate Resins", J Appl Polym Sci, Vol. 130, pp. 3299-3310. (DOI: 10.1002/app.39571)

Wiesbrock, F., Kelly, A.M. (9/2013). "Poly(2-Oxazoline)s as Additives in Polyolefin Compounds with Antimicrobially Active Surfaces", in "Advances in Polymer Science and Technology", pp. 21-21.

Wiesbrock, F., Kelly, A.M., Stelzer, F. (9/2013). "Partiell hydrolysierte Poly(2-oxazolin)e als Kontaktbiozide an Polymeroberflächen", BioNanoMaterials, vol. 13, pp. 197-197.

Berer, M., Pinter, G. (6/2013). "Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach", Polymer Testing, vol. 32, pp. 870-879. (DOI: 10.1016/j.polymertesting.2013.03.022)

Chassé, W., Schlögl, S., Riess, G., Saalwächter, K. (6/2013). "Inhomogeneities and local chain stretching in partially swollen networks", Soft Matter, pp. 1-12. (DOI: 10.1039/c3sm50195g)

Edler, M., Mayrbrugger, S., Fian, A., Trimmel, G., Radl, S., Kern, W., Griesser, T. (6/2013). "Wavelength selective refractive index modulation in a ROMP derived polymer bearing phenyl- and ortho-nitrobenzylester groups", J. Mater. Chem. C., pp. 3931-3938. (DOI: 10.1039/c3tc00006k)

Fischereder, A., Schenk, A., Rath, T., Haas, W., Delbos, S., Gougaud, C., Naghavi, N., Pateter, A., Saf, R., Schenk, D., Edler, M., Bohnemann, K., Reichmann, A., Chernev, B., Hofer, F., Trimmel, G. (6/2013). "Solution-processed copper zinc tin sulfide thin films from metal xanthate precursors", Monatshefte für Chemie, vol. 2013-144, 273-283. (DOI: 10.1007/s00706-012-0882-6)

Lenko, D., Schlögl, S., Temel, A., Kern, W., Schaller, R., Holzner, A. (6/2013). "Dual crosslinking of carboxylated nitrile butadiene rubber latex employing the thiol-ene photoreaction", Journal of Applied Polymer Science, vol. 129(5), pp. 2735–2743. (DOI: 10.1002/app.38983)

Berer, M., Major, Z., Pinter, G. (3/2013). "Elevated Pitting Wear of Injection Molded PEEK Rolls", Wear, vol. 297, pp. 1052-1063. (DOI: 10.1016/j.wear.2012.11.062)

Berer, M., Major, Z., Pinter, G., Constantinescu Dan, M., Marsavina, L. (3/2013). "Investigation of the dynamic mechanical behavior of Polyetheretherketone (PEEK) in the high stress tensile regime", Mechanics of Time-Dependent Materials, online. (DOI: 10.1007/s11043-013-9211-7)

Kelly, A., Kaltenhauser, V., Mühlbacher, I., Rametsteiner, K., Kren, H., Slugovc, C., Stelzer, F., Wiesbrock, F. (3/2013). "Poly(2-oxazoline)-derived Contact Biocides: Contributions to the Understanding of Antimicrobial Activity", Macromolecular Bioscience, vol. 13, pp. 116-125. (DOI: 10.1002/mabi.201200240)

Kelly, A., Kaltenhauser, V., Mühlbacher, I., Rametsteiner, K., Kren, H., Slugovc, C., Stelzer, F., Wiesbrock, F. (3/2013). "Poly(2-oxazoline)-derived Contact Biocides: Contributions to the Understanding of Antimicrobial Activity", Macromolecular Bioscience, vol. 13, pp. 140 (Back Cover). (DOI: 10.1002/mabi.201200240)

Redhead, A., Frank, A., Pinter, G. (3/2013). "Investigation of slow crack growth initiation in polyethylene pipe grades with accelerated cyclic tests", Engineering Fracture Mechanics, vol. 101, pp. 2-9. (DOI: 10.1016/j.engfracmech.2012.09.022)

Tscharnuter, D., Muliana, A. (3/2013). "Nonlinear response of viscoelastic polyoxymethylene (POM) at elevated temperatures", Polymer, vol. 54, pp. 1208-1217. (DOI: 10.1016/j.polymer.2012.12.043)

Weber, A., Resch, K. (3/2013). "Thermotropic glazings for overheating protection", Energy Procedia, vol. 30, pp. 471-477. (DOI: 10.1016/j.egypro.2012.11.056)

2012

Berer, M., Major, Z., Pinter, G. (12/2012). "Elevated Pitting Wear of Injection Molded Polyetheretherketone (PEEK) Rolls", Wear, Vol. 297, Issues 1–2,    pp. 1052–1063. (DOI: 10.1016/j.wear.2012.11.062)

Feuchter M., Laske, S., Witschnigg, A., Mattausch, H., Kracalik, M., Pinter, G., Feuchter, M.; Maier, G., Holzer, C. (12/2012). "Determining the ageing of polypropylene nanocomposites using rheological measurements", Applied Rheology, ISSN 1430-6395, Kerschensteiner Verlag, Zürich, 22 (2012) 2, S. 24590 - 24614.

Gódor, I., Schwarz, T., Major, Z. (12/2012). "Development of Surface Dynamic Mechanic Analysis Tests for TPU Materials", FME Transactions, 116, VoL. 38.

Kelly, A. M., Kaltenhauser, V., Mühlbacher, I., Rametsteiner, K., Kren, H., Slugovc, Ch., Stelzer, F., Wiesbrock, F. (12/2012). "Poly(2-oxazoline)-derived Contact Biocides: Contributions to the Understanding of Antimicrobial Activity", Macromol. Biosci. 2012, DOI: 10.1002/mabi.201200240, online published, Cover Issue Jan. 2013. (DOI: 10.1002/mabi.201200240)

Kienberger, J., Noormofidi, N., Mühlbacher, I., Klarholz, I., Harms, C., Slugov, Ch., (12/2012). "Antimicrobial equipment of poly(isoprene) applying thiol-ene chemistry", Journal of Polymer Science, Part A: Polymer Chemistry, 2012, 50, 2236–2243. (DOI: 10.1002/pola.26001)

Laske, S., Duretek, I., Witschnigg, A., Mattausch, H., Tscharnuter, D., Holzer, C. (12/2012). "Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites", Polymer Engineering and Science 52, vol. 8, 1749-1753. (DOI: 10.1002/pen.23121)

Marchl, M., Edler, M., Haase, A., Fian, A., Trimmel, G., Grießer, T., Stadlober, B., Zojer, E. (12/2012). "Tuning the Threshold Voltage in Organic Thin-Film Transistors by Local Channel Doping Using Photoreactive Interfacial Layers", Advanced Materials, Vol. 22, 5361.

Muhr, N., Grinschgl, M., Griesser, T., Kern, W., Schröttner, H. (12/2012). "Patterned immobilisation of silicon dioxide nanoparticles on the surface of a photosensitive polymer", Thin Solid Films, 520, 1789. (DOI: 10.1016/j.tsf.2011.08.082)

Redhead, A., Frank, A., Pinter, G. (12/2012). "Investigation of slow crack growth initiation in polyethylene pipe grades with accelerated cyclic tests", Engineering Fracture Mechanics, online, pp. 1-8. (DOI: 10.1016/j.engfracmech.2012.09.022)

Wolfberger, A., Edler, M., Belzik, M., Jakopic, G., Trimmel, G., Kern, W., Griesser, T. (12/2012). "UV-Induced Refractive Index Modulation of Photoreactive Polymers Bearing N-Acylcarbazole Groups", J. Polym. Sci. Part A, Polym. Chem., Vol. 48, 3507-3514. (DOI: 10.1002/pola.24081)

Woods, R., Feldbacher, S., Zidar, D., Langer, G., Satzinger, V., Schmid, G., Leeb, W., Kern, W. (12/2012). "Development and Characterisation of Opto-electronic Circuit Boards produced by Two Photon Polymerisation using a Polysiloxane Containing Acrylate Functional Groups", Applied Optics, vol. 52, pp. 388-393. (DOI: 10.1364/AO.52.000388)

Ziegler, E., Macher, J., Gruber, D.P., Pölt, P., Kern, W.., Lummerstorfer, T., Feldgitscher, C., Holzner, A., Trimmel, G., (12/2012). "Investigation of the influence of stearic acid on rubber-brass adhesion", Rubber Chemistry and Technology 2012, 85 (2), 264 – 276. (DOI: 10.5254/rct.12.88940)

Kelly, A., Kaltenhauser, V., Mühlbacher, I., Rametsteiner, K., Kren, H., Slugovc, C., Stelzer F., Wiesbrock, F. (11/2012). "Poly(2-oxazoline)-derived Contact Biocides: Contributions to the Understanding of Antimicrobial Activity", Macromolecular Bioscience 13 (2013), pp. 1-10. (DOI: 10.1002/mabi.201200240)

Kelly, A., Wiesbrock, F. (11/2012). "Strategies for the Synthesis of Poly(2-Oxazoline)-Based Hydrogels", Macromolecular Rapid Communications 33, pp. 1632-1647. (DOI: 10.1002/marc.201200333)

Resch, K., Hausner, R., Wallner, G. M., Lang, R.W. (11/2012). "Thermotropic Layers for Overheating Protection of all-Polymeric Flat Plate Solar Collectors", Polymeric Materials for Solar Thermal Applications, WILEY-VCH Verlag GmbH & Co. KGaA, pp. 255-265.

Resch, K., Wallner, G. M. (11/2012). "Plastics Market", Polymeric Materials for Solar Thermal Applications, WILEY-VCH Verlag GmbH & Co. KGaA, pp. 129-134.

Rossegger, E., Olah, L., Fischer, R., Kaschnitz, P., Varga, O., Kallay, M., Scheipl, G., Stelzer, F., Wiesbrock, F. (11/2012). "Synthesis of a Poly(2-Azanorbornene) with High Degree of cis-TT-Stereoregularity and Regular Secondary Solution Structure", Polymer Chemistry 3, pp. 2760 - 2767. (DOI: 10.1039/c2py20219k)

Arar, M., Pein, A., Haas, W., Hofer, F., Norrman, K., Krebs, F.C., Rath, T.,Trimmel, G. (9/2012). "Comprehensive Investigation of Silver Nanoparticle/Aluminum Electrodes for Copper Indium Sulfide/Polymer Hybrid Solar Cells", The Journal of Physical Chemistry C, pp. 19191–19196. (DOI: 10.1021/jp306242e)

Rossegger, E., Olah, L., Fischer, R., Kaschnitz, P., Varga, O., Kallay, M., Scheipl, G., Stelzer, F., Wiesbrock, F. (9/2012). "Synthesis of a Poly(2-Azanorbornene) with High Degree of cis-TT-Stereoregularity and Regular Secondary Solution Structure", Polymer Chemistry, vol. 3, pp. 2760-2767. (DOI: 10.1039/c2py20219k)

Tscharnuter, D., Gastl, S., Pinter, G . (9/2012). "Modeling of the nonlinear viscoelasticity of polyoxymethylene in tension and compression", International Journal of Engineering Science, vol. 60, pp. 37-52. (DOI: 10.1016/j.ijengsci.2012.05.004)

Bodner, T., Behrendt, A., Prax, E., Wiesbrock, F. (6/2012). "Correlation of Surface Roughness and Surface Energy of Silicon Wafers with Their Reactivity", Chemical Monthly, pp. 717-722. (DOI: 10.1007/s00706-012-0730-8)

Flatscher, T., Wolfahrt, M., Pinter, G., Pettermann, H.E. (6/2012). "Simulations and Experiments of Open Hole Tension Tests — Assessment of Intraply Plasticity, Damage, and Localization", Composites Science and Technology, vol. 72, pp. 1090-1095. (DOI: 10.1016/j.compscitech.2011.07.021)

Berer, M., Major, Z. (6/2012). "Characterisation of the Local Deformation Behaviour of Engineering Plastics Rolls", Strain: An International Journal for Experimental Mechanics, Volume 48, Issue 3, pp. 225–234. (DOI: 10.1111/j.1475-1305.2011.00816.x)

Weber, A., Resch, K. (6/2012). "Effect of temperature-cycling on the morphology", Journal of Polymer Research 19, vol. 6, pp. 9888-9896. (DOI: 10.1007/s10965-012-9888-3)

Feldbacher, S., Bichler, S., Kern, W., et al (3/2012). "Functional flexible organic-inorganic hybrid polymer for two photon patterning of optical waveguides", Optical Materials, vol. 34, issue 5, pp. 772-780. (DOI: 10.1016/j.optmat.2011.11.007)

Frank, A., Bruckmoser, K., Redhead, A., Gruber, D.P., Pinter, G. (3/2012). "Investigation of the Slow Crack Growth Behavior of Static and Cyclic Loaded Specimens of Polyethylene by 2D and 3D Optical Fracture Surface Analysis", Macromolecular Symposia, vol. 311/1, pp. 103-111. (DOI: 10.1002/masy.201000097)

Frank, A., Hutar, P., Pinter, G. (3/2012). "Numerical Assessment of PE 80 and PE 100 Pipe Lifetime Based on Paris-Erdogan Equation", Macromolecular Symposia, vol. 311/1, pp. 112-121. (DOI: 10.1002/masy.201000096)

Frank, A., Hutar, P., Pinter, G. (3/2012). "Numerical Assessment of PE 80 and PE 100 Pipe Lifetime Based on Paris-Erdogan Equation", Macromolecular Symposia, Vol. 311/1, pp. 112-121. (DOI: 10.1002/masy.201000096)

Gager, J., Pettermann, H.E. (3/2012). "Numerical homogenization of textile composites based on shell element discretization", Composites Science and Technology, vol. 72, pp. 806-812. (DOI: 10.1016/j.compscitech.2012.02.009)

Griesser, T., Radl, S. V., Koepplmayr, T., Wolfberger, A., Edler, M., Pavitschitz, A., Teichert, C., Rath, T., Trimmel, G., Schwabegger, G., Simbrunner, C., Sitter, H., Kern, W. (3/2012). "UV-Induced Modulation of the Conductivity of Polyaniline: Towards Photo-Patternable Charge Injection Layer for Structured Organic Light Emitting Diodes", Journal of Materials Chemistry, vol. 22, pp. 2922-2928. (DOI: 10.1039/c1jm14100g)

Kelly, A.M., Bodner, T., Ellmaier, L., Schenk, V., Albering, J., Wiesbrock, F. (3/2012). "Initiation Selectivity during CROP: Effect of pi-Electrons in 2-Oxazoline Rings", Polymer Preprints, vol. 53 (1), pp. 312-313.

Kelly, A.M., Hecke, A., Wirnsberger, B., Wappl, C., Wiesbrock, F. (3/2012). "Poly(2-Oxazoline)-Based Hydrogels: Influence of the Monomers on the Swelling Degrees", Polymer Preprints, vol. 53 (1), pp. 362-363.

Koepplmayr, T., Cardinale, M., Rath, T., Trimmel, G., Rentenberger, S., Zojer, E., Kern, W., Griesser, T. (3/2012). "Patterned Immobilization of a Fluorescent Ru(II) Complex in Polymer Films Using the Photoreaction of Benzyl thiocyanate: Towards Color Emission Tuning of Electroluminescent Devices", Macromolecular Chemistry and Physics, vol. 213, pp. 367-373. (DOI: 10.1002/macp.201100494)

Laske, S., Duretek, I., Witschnigg, A., Mattausch, H., Tscharnuter, D., Holzer, C. (3/2012). "Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites", Polymer Engineering & Science, published online. (DOI: 10.1002/pen.23121)

Lenko, D., Schlögl, S., Kramer, R., Kern, W., Schaller, R., Holzner, A. (3/2012). "Contributions to the Characterization of Chlorinated Polyisoprene Surfaces", Macromolecular Symposia, vol. 311, pp. 9-17. (DOI: 10.1002/masy.201000136)

Lenko, D., Schlögl, S., Schaller, R., Holzner, A., Kern, W. (3/2012). "Accelerator free cross-linking of XNBR-Latex using UV techniques", Journal of Applied Polymer Science, paper 8

Redhead, A., Pinter, G., Frank, A. (3/2012). "Analysis of Molecular and Morphological Effects on Slow Crack Growth in Modern PE Pipe Grades by Cyclic Fracture Mechanics Tests", Macromolecular Symposia, vol. 311/1, pp. 41-48. (DOI: 10.1002/masy.201000110)

Schenk, V., Ellmaier, L., Rossegger, E., Edler, M., Griesser, T., Weidinger, G., Wiesbrock, F. (3/2012). "Water-Developable Poly(2-Oxazoline)-Based Negative Photoresists", Macromolecular Rapid Communications, vol. 33, pp. 396-400. (DOI: 10.1002/marc.201100717)

Wiesbrock, F., Kelly, A.M., Rametsteiner, K., Kaltenhauser, V., Stelzer, F . (3/2012). "Microwave-Assisted Syntheses and Applications of Poly(2-Oxazoline)-Derived Contact Biocides", Polymer Preprints, vol. 53 (1), pp. 321-322.

Berger, G.R., Friesenbichler, W., Reitter, M., Jutz, S., Langecker, G. (1/2012). "Hochglanzoberflächen beim Spritzgießen. Quantitative topografische Beurteilung der Formenstahl- und Kunststoffoberfläche", MP materials testing (MP Materialprüfung), 52, pp. 211-221.

Feuchter, M., Maier, G., Zizak, I., Pinter, G., Kracalik, M., Laske, S., Langecker, G. (1/2012). "Characterization of the orientation parameters around crack tips in unfilled and nanofilled poly(propylene) using in-situ synchrotron small and wide angle scanning scattering techniques", Macromolecular symposia, 296, pp. 189-196. (DOI: 10.1002/masy.201051028)

Gaier, C., Fleischer, H., Guster, C., Pinter, G. (1/2012). "Einfluss von Faserorientierung, Temperatur und Feuchtigkeit auf das Schwingfestigkeitsverhalten von spritzgegossenen kurzfaserverstärkten Thermoplasten", MP materials testing (MP Materialprüfung), 52, pp. 534-542.

Kracalik, M., Laske, S., Witschnigg, A., Holzer, C. (1/2012). "Elongational and shear flow in polymer-clay nanocomposites measured by on-line extensional and off-line shear rheometry", Rheological acta 50, 11-12, pp. 937-944.

Laske, S., Rüf, E., Piontek, M., Holzer, C. (1/2012). "Surface modification of Unfilled and Highly Filled Polyactic Acid Films Using Corona Discharge Treatment", Journal of Characterization and Development of Novel Materials, pp. 1-7.

Rupp, B., Ebner, C., Rossegger, E., Slugovc, C., Stelzer, F., Wiesbrock, F. (1/2012). "UV-induced Crosslinking of Biopolyester Poly(3-hydroxyutyrate)-co-(3-hydroxyvalerate)", Green chemistry, pp. 1796-1802. (DOI: 10.1039/c0gc00066c)

Schlögl, S., Aust, N., Schaller, R., Holzner, A., Kern, W. (1/2012). "Pre-vulcanization of natural rubber latex by UV techniques: a process towards reducing type IV chemical sensitivity of latex articles", Rubber chemistry and technology, 83, pp. 133-148.

Schlögl, S., Kern, W. (1/2012). "Photochemisches Vernetzungsverfahren für Naturkautschuk-Latex", Kautschuk, Gummi, Kunststoffe, 01/02, pp. 1-1.

Schlögl, S., Temel, A., Kern, W., Schaller, R., Holzner, A. (1/2012). "Manufacture of non-allergenic surgical gloves via UV-techniques", Kautschuk, Gummi, Kunststoffe, 5, pp. 187-192.

Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W., Haberkorn, M., Langecker, G., Holzer, C. (1/2012). "In-line characterization of polypropylene nanocomposites using FIT-NIR", Journal of Applied polymer science, 117, pp. 3047-3053.

2011

Kelly, A., Hecke, A., Wirnsberger, B., Wiesbrock, F. (12/2011). "Synthesis of Poly(2-oxazoline)-Based Hydrogels with Tailor-Made Swelling Degrees Capable of Stimuli-Triggered Compound Release", Macromolecular Rapid Communications, vol. 32, pp. 1815-1819. (DOI: 10.1002/marc.201100409)

Schlögl, S., Temel, A., Schaller, R., Holzner, A., Kern, W. (12/2011). "Fluorination of Elastomer Materials", European Polymer Journal, vol. 47, pp. 2321-2330.Resch, K., Weber, A. (11/2011). "Smart Windows - Smart Collectors: Entwicklung von funktionalen Überhitzungsschutzverglasungen für Gebäudeverglasungen und thermische Solarkollektoren", Berg- und hüttenmännische Monatshefte, vol. 156 (11), pp. 429-433. (DOI: 10.1016/j.eurpolymj.2011.09.010)

Schlögl, S., Reischl, M., Ribitsch, V., Kern, W. (11/2011). "UV induced microcellular foaming - A new approach towards the production of 3D structures in offset printing techniques", Progress in Organic Coatings, vol. 73, pp. 54-61. (DOI: 10.1016/j.porgcoat.2011.08.020)

Tscharnuter, D., Jerabek, M., Major, Z., Pinter, G. (11/2011). "Uniaxial nonlinear viscoelastic viscoplastic modeling", Mechanics of Time-Dependent Materials, published online, pp. 1-12. (DOI: 10.1007/s11043-011-9158-5)

Woods, R., Feldbacher, S., Kern, W. et al. (11/2011). "Functional flexible organic-inorganic hybrid polymer for two photon patterning of optical waveguides", Optical Materials, published online. (DOI: 10.1016/j.optmat.2011.11.007)

Bodner, T., Ellmaier, L., Schenk, V., Albering, J., Wiesbrock, F. (9/2011). "Delocalized p-electrons in 2-oxazoline rings resulting in negatively charged nitrogen atoms: revealing the selectivity during the initiation of cationic ring-opening polymerizations", Polymer International, vol. 60, pp. 1173-1179. (DOI: 10.1002/pi.3126)

Lucyshyn, T., Knapp, G., Kipperer, M., Holzer, C. (9/2011). "Determination of the transition temperature at different cooling rates and its influence on prediction of shrinkage and warpage in injection molding simulation", Journal of Applied Polymer Science, Volume 123, Issue 2, pp. 1162 - 1168. (DOI: 10.1002/app.34591)

Berger, G.R., Gruber, D.P., Friesenbichler, W., Teichert, C., Burgsteiner, M. (6/2011). "Replication of stochastic and geometric micro structures. Aspects of visual appearance", Intern. Polymer Processing XXVI , vol. 3, pp. 313-322. (DOI: 10.3139/217.2451)

Gevorgyan, S.A., et al. (6/2011). "An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules", Solar Energy Materials&SolarCells, Vol. 95, pp. 1398-1416. (DOI: 10.1016/j.solmat.2011.01.010)

Gruber, D.P., Berger, G., Pacher, G., Friesenbichler, W. (6/2011). "Novel approach to the measurement of the visual perceptibility of sink marks on injection molding parts", Polymer Testing, vol. 30, pp. 651-656. (DOI: 10.1016/j.polymertesting.2011.04.013)

Koepplmayr, T., Cardinale, M., Jakopic, G., Trimmel, G., Kern, W., Griesser, T. (6/2011). "Photosensitive polymers bearing fully aromatic esters for multilayer data storage devices", Journal of Materials Chemistry, vol. 21, pp. 2965-2972.

Maier, E., Rath, T., Haas, W., Werzer, O., Saf, R., Hofer, F., Meissner, D., Volubujeva, O., Bereznev, S., Mellikov, E., Amenitsch, H., Resel, R., Trimmel, G. (6/2011). "CuInS2–Poly(3-(ethyl-bbutanoate)thiophene)nanocompositesolarcells: Preparation by an in-situ formation route, perfomance and stability issues", Solar EnergyMaterials&SolarCells, Vol. 95, pp.1354–1361. (DOI: 10.1016/j.solmat.2010.12.025)

Tscharnuter, D., Jerabek, M., Major, Z., Pinter, G. (6/2011). "Irreversible deformation of isotactic polypropylene in the pre-yield regime", European Polymer Journal, vol. 47(5), pp. 989-996. (DOI: 10.1016/j.eurpolymj.2011.03.003)

Wolfberger, A., Rupp, B., Kern, W., Griesser, T., Slugovc, C. (6/2011). "Ring Opening Metathesis Polymerization Derived Polymers as Photoresists: Making Use of Thiol-ene Chemistry", Macromolecular Rapid Communications, vol. 32, pp. 518-522. (DOI: 10.1002/marc.201000698)

Woods, R., Feldbacher, S., Langer, G., Satzinger, V., Schmidt, V., Kern, W. (6/2011). "Epoxy silicone based matrix materials for two-photon patterning of optical waveguides", Polymer, Vol. 52, pp. 3031-3037. (DOI: 10.1016/j.polymer.2011.04.052)

Koepplmayr, T., Cardinale, M., Jakopic, G., Trimmel, G., Kern, W., Griesser, T. (3/2011). "Photosensitive polymers bearing fully aromatic esters for multilayer data storage devices", Journal of Materials Chemistry, vol. 21, pp. 2965-2972.

Tscharnuter, D., Jerabek, M.,  Major, Z.,  Lang, R.W. (3/2011). "Time-dependent poisson’s ratio of polypropylene compounds for various strain histories", Mechanics of Time-Dependent Materials, Vol. 15, pp. 15-28. (DOI: 10.1007/s11043-010-9121-x)

Tscharnuter, D., Jerabek, M., Major, Z., Lang, R.W. (3/2011). "On the determination of the relaxation modulus of PP compounds from arbitrary strain histories", Mechanics of Time-Dependent Materials, vol. 15, pp. 01-14. (DOI: 10.1007/s11043-010-9119-4)

Wolfberger, A., Rupp, B., Kern, W., Griesser, T., Slugovc, C. (3/2011). "Ring Opening Metathesis Polymerization Derived Polymers as Photoresists: Making Use of Thiol-ene Chemistry", Macromolecular Rapid Communications, vol. 32, pp. 518-522. (DOI: 10.1002/marc.201000698)

Ebner, C., Bodner, T., Stelzer, F., Wiesbrock, F. (2/2011). "One Decade of Microwave-Assisted Polymerizations: Quo vadis?", Macromolecular Rapid Communications, vol. 32, pp. 254-288. (DOI: 10.1002/marc.201000539)

Kreutzwiesner, E., Noormofidi, N., Wiesbrock, F., Kern, W., Rametsteiner, K., Stelzer, F., Slugovc, C. (2/2011). "Contact Batericides and Fungicides on the Basis of Amino-Functionalized Poly(norbornene)s", Journal of Polymer Science: A Polymer Chemistry, vol. 48, pp. 4504-4514. (DOI: 10.1002/pola.24241)

Tuba, F., Olah, L., Nagy, P. (1/2011). "Characterization of the fracture properties of aragonite- and calcite-filled poly(e-caprolactone) by the essential work of fracture method", Journal of Polymer Science, Vol. 120, pp. 2587-2595. (DOI: 10.1002/app.33341)

Fuchs, P., Major, Z. (12/2010). "Cyclic bend tests for the reliability evaluation of printed circuit boards under dynamic loads", in "Frattura ed Integrità Strutturale", No. 15, pp. 64-73.

2010

Schlögl, S., Aust, N., Schaller, R., Holzner, A., Kern, W. (11/2010). "Survey of chemical residues and biological evaluation of photochemically pre-vulcanized surgical gloves", Chemical Monthly, Vol. 141/12, pp. 1365-1372.

Schlögl, S., Aust, N., Schaller, R., Holzner, A., Kern, W. (9/2010). "Pre-vulcanization of natural rubber latex by UV-Techniques: A new process towards reducing type IV chemical sensitivity of latex articles", Rubber Chemistry and Technology, Vol 83 / 2, pp. 199-213.

Fuchs, P., Major, Z. (7/2010). "Experimental Determination of Cohesive Zone Models for Epoxy Composites", Experimental Mechanics, published online, DOI 10.1007/s11340-010-9370-2, pp. 1-8. (DOI: 10.1007/s11340-010-9370-2)

Berer, M., Major, Z. (6/2010). "Characterization of the global deformation behaviour of engineering plastics rolls", International Journal of Mechanics and Materials in Design, published online (DOI 10.1007/s10999-010-9111-9)

Fuchs, P., Major, Z. (6/2010). "Experimental Determination of Cohesive Zone Models for Epoxy Composites", Experimental Mechanics, published online, DOI 10.1007/s11340-010-9370-2. (DOI: 10.1007/s11340-010-9370-2)

Leitgeb, A., Wappel, J., Slugovc, C. (6/2010). "The ROMP Toolbox Upgraded", Polymer, vol.  51, pp. 2927-2946.

Major, Z., Isasi, M., Schwarz, T. (5/2010). "Characterization of the fracture and fatigue behavior of thermoplastic elastomer materials", Key Engineering Materials, vol. 417-418, pp. 789-792. (DOI: 10.4028/www.scientific.net/KEM.417-418.789)

Schlögl, S., Temel, A., Schaller, R., Holzner, A., Kern, W. (5/2010). "Manufacture of Non-Allergenic Surgical Gloves via UV-Techniques", Kautschuk, Gummi, Kunststoffe, Ausgabe 5, pp. 187-192.

Fischer, J., Wallner, G., Pieber, A. (4/2010). "Morphology of polyethylene ski base materials", Journal of Sports Sciences, Volume 28, Issue 5, pp. 555-562.

Berer, M., Major, Z. (3/2010). "Characterization of the global deformation behaviour of engineering plastics rolls", International Journal of Mechanics and Materials in Design, online http://www.springerlink.com/content/q2g0u11wj7062j75/fulltext.pdf, pp. 1-9. (DOI: 10.1111/j.1475-1305.2011.00816.x)

Jerabek, M., Major, Z., Lang, R.W. (3/2010). "Strain determination of polymeric materials using digitalimage correlation", Polymer Testing, vol. 29, pp. 407-416. (DOI: 10.1016/j.polymertesting.2010.01.005)

Jerabek, M., Major, Z., Lang, R.W. (3/2010). "Uniaxial compression testing of polymeric materials", Polymer Testing, vol. 29, pp. 302-309. (DOI: 10.1016/j.polymertesting.2009.12.003)

Jerabek, M., Major, Z., Renner, K., Moczo, J., Pukanszky, B., Lang, R.W. (3/2010). "Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled polypropylene composites under tension", Polymer, vol. 51, pp. 2040-2048. (DOI: 10.1016/j.polymer.2010.02.033)

Kahlen, S., Jerabek, M., Wallner, G., Lang, R.W. (3/2010). "Characterization of physical and chemical aging of polymeric solar materials by mechanical testing", Polymer Testing, vol. 29, pp. 72-81. (DOI: 10.1016/j.polymertesting.2009.09.007)

Kahlen, S., Wallner, G., Lang, R.W. (3/2010). "Aging behavior and lifetime modeling for polycarbonate", Solar Energy, vol. 84, pp. 755-762.Major, Z., Lang, R.W. (3/2010). "Characterization of the fracture behavior of NBR and FKM grade elastomers for oilfield applications", Engineering Failure Analysis, vol. 17, pp. 701-711. (DOI: 10.1016/j.solener.2010.01.021)

Olivares, A., Rekstad, J., Meir, M., Kahlen, S., Wallner, G.M. (3/2010). "Degradation model for an extruded polymeric solar thermal absorber", Solar Energy Materials & Solar Cells, vol. 94, pp. 1031–1037. (DOI: 10.1016/j.solmat.2010.02.001)

Oreski, G., Tscharnuter, D., Wallner, G. (3/2010). "Determination of solar optical properties of transparent polymer films using UV/vis spectroscopy", Solar Energy Materials and Solar Cells, Vol 94, Issue 5, pp. 884-891. (DOI: 10.1016/j.solmat.2010.01.012)

Resch, K., Wallner, G.M. (3/2010). "Morphology of phase-separated thermotropic layers based on UV cured acrylate resins", Polymers for Advanced Technologies, Vol 20, Issue 12, pp. 1163-1167. (DOI: 10.1002/pat.1393)

Szadkowska, A., Gstrein, X., Burtscher, D., Jarzembska, K., Wozniak, K., Slugovc, C., Grela, K. (3/2010). "Latent Thermo-Switchable Olefin Metathesis Initiators Bearing a Pyridil-Functionalized Chelating Carbene: Influence of the Leaving Group`s Rigidity on the Catalyst`s Performance", Organometallics, vol. 29, pp. 117-124. 

Wimmer, G., Kitzmüller, W., Pinter, G., Wettemann, T., Pettermann, H.E. (3/2010). "Computational and experimental investigation of delaminationin L-shaped laminated composite components", Engineering Fracture Mechanics, vol. 76, pp. 2810–2820. (DOI: 10.1016/j.engfracmech.2009.06.007)

Fischer, J., Wallner, G.M., Strauß, B., Jandel, L. (2/2010). "Morphology of wax modified coil coatings without and with pigmentation", Progress in Organic Coatings, Vol. 67, pp. 38-43. (DOI: 10.1016/j.porgcoat.2009.09.011)

Kahlen, S., Wallner, G., Lang, R.W., Meir, M., Rekstad, J. (2/2010). "Aging behavior of polymeric solar absorber materials: Aging on the component level", Solar Energy, vol. 84, pp. 459-465. (DOI: 10.1016/j.solener.2010.01.003)

Gódor, I., Major, Z., Grün, F., Vezér, S. (1/2010). "Experimental Definition of a Failure Model for the Tribological Behavior of PTFE Bronze Compounds", Proc. IMechE, Journal of Engineering Tribology, vol. Vol. 223 Part J, pp. 807-815. (DOI: 10.1243/13506501JET549)

2009

Choi, B.H., Balika, W., Chudnovsky, A., Pinter, G., Lang, R.W. (12/2009). "Lifetime Prediction of the Fatigue Crack Growth (FCG) of High Density Polyethylene (HDPE) by Crack Layer Theory", Polymer Engineering and Science, Vol. 49 (7), pp. 1421-1428.

Fischer, J., Wallner, G.M., Strauß, B., Jandel, L. (12/2009). "Effect of curing conditions on the morphology of wax modified coil coatings", Progress in Organic Coatings, Vol. 66, pp. 420-424. (DOI: 10.1016/j.porgcoat.2009.09.006)

Fischlschweiger, M., Aust, N., Oberaigner, E. R., Kock, C. (12/2009). "Mathematical Modeling and Optimization of Run Parameters of Crystallization Analysis Fractionation (CRYSTAF)", Macromolecular Chemistry and Physics, vol. 210, pp. 383-392. (DOI: 10.1002/macp.200900445)

Frank, A., Freimann, W., Pinter, G., Lang, R.W. (12/2009). "A fracture mechanics concept for the accelerated characterization of creep crack growth in PE-HD pipe grades", Engineering Fracture Mechanics, 76, pp. 2780-2787. (DOI: 10.1016/j.engfracmech.2009.06.009)

Frank, A., Pinter, G.,  Lang, R.W. (12/2009). "Prediction of the Remaining Lifetime of Polyethylene Pipes after up to 30 Years in use", Polymer Testing, 28, pp. 737-745. (DOI: 10.1016/j.polymertesting.2009.06.004)

Burgstaller, C., Rüf, W., Stadlbauer, W., Pilz, G., Lang, R.W. (9/2009). "Utilizing unbleached cellulosic fibres in polypropylene matrix composites for injection moulding applications", Journal of Biobased Materials and Bioenergy, pp. 226-231, ASP - American Scientific Publishers. (DOI: 10.1166/jbmb.2009.1027)

Frank, A., Freimann, W., Pinter, G., Lang, R.W. (9/2009). "A Fracture Mechanics Concept for the Accelerated Characterization of Creep Crack Growth in PE-HD Pipe Grades", Engineering Fracture Mechanics, ESIS Publication (2009). (DOI: 10.1016/j.engfracmech.2009.06.009)

Oreski, G., Wallner, G. (7/2009). "Aging characterization of commercial etyhlene copolymer greenhouse films by analytical and mechanical methods", Biosystems Engineering, 103, pp. 489-496. (DOI: 10.1016/j.biosystemseng.2009.05.003)

Buder-Stroisznigg, M., Wallner, G.M., Strauß, B., Jandel, L., Lang, R.W. (6/2009). "Structure-property correlations of flexible clear coats", Progress in Organic Coatings, vol. 65, pp. 328-332. (DOI: 10.1016/j.porgcoat.2009.01.007)

Oreski, G., Wallner, G.M. (6/2009). "Evaluation of the aging behavior of ethylene copolymer films for solar applications under accelerated weathering conditions", Solar Energy, vol. 83, pp. 1040-1047. (DOI: 10.1016/j.solener.2009.01.009)

Schrittesser, B., Major, Z., Filipcsei, G. (6/2009). "Characterization of the dynamic mechanical behavior of Polydimethylsiloxane based magneto elastomer", Jourmal of Physics: Conference Series 149, vol. 149, pp. 1088-1092. (DOI: 10.1179/146580109X12473409436986)

Buder-Stroisznigg, M., Wallner, G.M., Strauß, B., Jandel, L., Lang, R.W. (3/2009). "Flexible clear coats - Effect of curing conditions", Progress in Organic Coatings, 65, pp. 44-48. (DOI: 10.1016/j.porgcoat.2008.09.009)

Griesser, T.,Kuhlmann, J.-C., Wieser, M., Kern, W., Trimmel, G. (3/2009). "UV induced Modulation of the Refractive Index and the Surface Properties of Photoreactive Polymers bearing N-phenylamide Groups", Macromolecules, 42, pp. 725-731. (DOI: 10.1002/pola.24081)

Gruber, D., Engel, G., Sormann, H., Schüler, A., Papousek, W. (3/2009). "Modeling the absorption behavior of solar thermal collector coatings utilizing graded a-C:H=TiC layers", Applied Optics, 48/8, pp. 1514-1519. (DOI: 10.1364/AO.48.001514)

Köstler, S., Zechner, B., Trathnigg, B., Fasl, H., Kern, W., Ribitsch, V. (3/2009). "Amphiphilic block copolymers containing thermally degradable poly(phthalaldehyde) blocks", Journal of Polymer Science, A: Polymer Chemistry, 47, pp. 1499-1509. (DOI: 10.1002/pola.23237)

2008

Griesser, T., Höfler, T., Temmel, S., Kern, W., Trimmel, G. (12/2008). "Photolithographic Patterning of Polymer Surfaces Using the Photo-Fries Rearrangement: Selective Postexposure Reactions", Chemistry of Materials, 19, pp. 3011-3016. (DOI: 10.1021/cm070506h)

Gruber, D.P., Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L., Lang, R.W. (10/2008). "A novel methodology for the evaluation of distinctness of image of glossy surfaces", Progress in Organic Coatings, 63, pp. 377-381. (DOI: 10.1016/j.porgcoat.2008.06.008)

Resch, K., Wallner, G.M. (10/2008). "Thermotropic layers for flat-plate collectors - A review of various concepts for overheating protection with polymeric materials", Solar Energy Materials & Solar Cells, Volume 93, Issue 1, pp. 119-128. (DOI: 10.1016/j.solmat.2008.09.004)

Resch, K., Wallner, G.M., Lang, R.W. (10/2008). "Cross-linking behavior of UV-curable acrylate resins", Journal of Plastics Technology, 2008/06, pp. 1-14.

Gamse, T., Marr, R., Wolf, C., Lederer, K. (9/2008). "Supercritical CO2 Impregnation of Polyethylene Components for Medical Purposes", Chemical Industry, 61 (5), pp. 229-232.

Grün, F., Gódor, I., Eichlseder, W. (9/2008). "Test methods to characterise differently designed tribomaterials", Tribotest 2008 (14), pp. 159-176.

Balika, W., Pinter, G., Lang, R.W. (6/2008). "Fatigue Crack Growth and Process Zone Development in a PE-HD Pipe Grade in Through-Thickness Direction", Advanced Engineering Materials 2006, 8, No. 11, pp. 1146-1150. (DOI: 10.1002/adem.200600137)

Balika, W., Pinter, G., Lang, R.W. (6/2008). "Systematic Investigations of Fatigue Crack Growth Behavior of a PE-HD Pipe Grade in Through-Thickness Direction", Journal of Applied Polymer Science, vol. 103, pp. 1745-1758. (DOI: 10.1002/app.25073)

Daschiel, U., Spanring, J., Ebel, M.F., Svagera, R., Schröttner, H., Kern, W. (6/2008). "Modification of Polyethylene by VUV Irradiation in the Presence of Trimethylsilane and Oxygen", Macromolecular Chemistry and Physics, Volume 209, Issue 12, pp. 1232-1239. (DOI: 10.1002/macp.200800034)

Fischer, J., Wallner, G.M., Pieber, A. (6/2008). "Spectroscopical investigation of ski base materials", Macromolecular Symposia 265, pp. 28-36. (DOI: 10.1002/masy.200850504)

Olah, L., Borbas, L. (6/2008). "Properties of calcium carbonate-containing composite scaffolds", Acta of Bioengineering and biomechanics, Vol. 10, pp. 61-66.

Oreski, G., Tscharnuter, D., Wallner, G.M. (6/2008). "Development of methods to determine the infrared-optical properties of polymer films", Macromolecular Symposia 265, pp. 124-133. (DOI: 10.1002/masy.200850513)

Pinter, G., Haager, M., Lang, R.W. (6/2008). "Influence of nonylphenol-polyglycol-ether environments on the results of the full notch creep test", Polymer Testing, vol. 26, pp. 700 (DOI: 10.1016/j.polymertesting.2007.01.010)

Resch, K., Wallner, G.M., Lang, R.W. (6/2008). "Spectroscopic Investigations of Phase-Separated Thermotropic Layers Based on UV Cured Acrylate Resins", Macromolecular Symposia 265, pp. 49-60. (DOI: 10.1002/masy.200850506)

Wallner, G.M., Major, Z., Maier, G., Lang, R.W. (6/2008). "Fracture analysis of annealed PVDF films", Polymer Testing, vol. 27, pp. 392-402. (DOI: 10.1016/j.polymertesting.2008.01.006)

Gstrein, X., Burtscher, D., Szadkowska, A., Barbasiewicz, M., Stelzer, F., Grela, K., Slugovc, C. (3/2008). "Ruthenium Quinoline and Quinoxaline Complexes: Thermally Triggered Initiators for Ring Opening Methathesis Polymerization", Journal of Polymer Science: Part A: Polymer Chemistry, Vol. 45, pp. 3494-3500. (DOI: 10.1002/pola.22083)

Olivares, A., Rekstad, J., Meir, M., Kahlen, S., Wallner, G.M. (3/2008). "A test procedure for extruded polymeric solar thermal absorbers", Solar Energy Materials and Solar Cells 92, pp. 445-452. (DOI: 10.1016/j.solmat.2007.10.006)

Sandholzer, M., Bichler, S., Stelzer, F., Slugovc, C. (3/2008). "UV-induced Crosslinking of Ring Opening Metathesis Block Copolymer Micelles", Journal of Polymer Science: Part A: Polymer Chemistry, Vol. 46, pp. 2402-2413.

Slugovc, C., Koppitz, A., Pogantsch, A., Stelzer, F. (3/2008). "Halogenation of Ru(COD)(8-quinolinolate)<sub>2</sub> and Ru(COD)(5-formyl-8-quinolinate)<sub>2</sub>", Inorganica Chimica Acta 358, pp. 2718-2724.

Wallner, G., Resch, K., Hausner, R. (3/2008). "Property and performance requirements for thermotropic layers to prevent overheating in an all polymeric flat-plate collector", Solar Energy Materials and Solar Cells 92, pp, 614-620. (DOI: 10.1016/j.solmat.2007.12.005)

2007

Buchgraber, C., Svagera, R., Ebel, M. F., Schröttner, H., Kern, W. (6/2007). "UV assisted surface modification of polybutadiene with phosphorus containing groups", Macromol.Chem.Phys, Vol. 11/2007, pp. 1159-1167. (DOI: 10.1002/macp.200600656)

Pinter, G., Haager, M., Lang, R.W. (6/2007). "A Test Concept for Lifetime Prediction of Polyethylene Pressure Pipes", Chemical Monthly, 138, pp. 347-355. (DOI: 10.1007/s00706-007-0618-1)

Resch, K., Wallner, G., Teichert, C., Gahleitner, M. (6/2007). "Highly transparent Polypropylene Cast Films: Relationsships between Optical Properties, Additives, and Surface Structure", Polymer Engineering and Science, pp. 1021-1032.

Maier, G., Wallner, G., Lang, R.W., Keckes, J., Amenitsch, H., Fratzl, P. (5/2007). "Fracture of poly(vinylidene fluoride): a combined synchrotron and laboratory in-situ X-ray scattering study", Journal of Applied Crystallography 40, pp. 564-567. (DOI: 10.1107/S0021889806054598)

Höfler, T., Griesser, T., Gstrein, X., Trimmel, G., Jakopic, G., Kern, W. (3/2007). "UV reactive polymers for refractive index modulation based on the photo-Fries rearrangement", Polymer 48, pp. 1930-1939. (DOI: 10.1016/j.polymer.2007.01.041)

Pinter, G., Haager, M., Balika, W., Lang, R.W. (3/2007). "Cyclic crack growth tests with CRB specimens for the evaluation of the long-term performance of PE pipe grades", Polymer Testing, 26, pp. 180-188. (DOI: 10.1016/j.polymertesting.2006.09.010)

Feichter, C., Major, Z., Lang, R.W. (1/2007). "Experimental determination of fatigue crack growth behavior and surface strain distribution of 'faint waist pure shear' specimens with different crack tip radii", Rubber Chemistry and Technology,  79, pp. 712-733.

2006

Wolf, C., Lederer, K., Bermeister, H. Losert, U., Böck, P. (12/2006). "Animal experiments with ultra-high molecular weight polyethylene (UHMW-PE) stabilised with alpha-tocopherol used for articulating surfaces in joint endoprostheses", Journal of Material Science, Materials in Medicine, 17, pp. 1341-1347. (DOI: 10.1007/s10856-006-0609-5)

Wolf, C., Lederer, K., Pfragner, R., Schauenstein, K. (12/2006). "Biocompatibility of ultra-high molecular weight polyethylene (UHMW-PE) stabilised with alpha-tocopherol used for joint edoprostheses assessed in-vitro", Journal of Material Science, Materials in Medicine. (DOI: 10.1007/s10856-006-0098-6)

Wolf, C., Macho, C., Lederer, K. (12/2006). "Accelerated ageing experiments with crosslinked and conventional ultra-high molecular weight polyethylene stabilised with alpha-tocopherol for total joint arthroplasty", Journal of Material Science, Materials in Medicine, 17, pp. 1333-1340. (DOI: 10.1007/s10856-006-0608-6)

Wolf, C., Maninger, J., Lederer, K. (12/2006). "Stabilisation of crosslinked ultra-high molecular weight polyethylene (UHMW-PE) acetabular components with alpha-tocopherol", Journal of Material Science, Materials in Medicine, 17, pp. 1323-1331. (DOI: 10.1007/s10856-006-0607-7)

Feichter, C., Major, Z., Lang, R.W. (11/2006). "Deformation Analysis of Notched Rubber Specimens", Strain 42, pp. 299-304. (DOI: 10.1111/j.1475-1305.2006.00286.x)

Wallner, G., Hausner, R., Hegedys, H., Schobermayr, H., Lang, R.W. (11/2006). "Application demonstration and performance of a cellulose tracetate polymer film based transparent insulation wall heating system", Solar Energy 80, pp. 1410-1416. (DOI: 10.1016/j.solener.2006.05.007)

Wallner, G., Major, Z., Maier, G., Lang, R.W. (11/2006). "Influence of Annealing on the Fracture Behavior of 200 µm Thick alpha-PVDF Films", Advanced Engineering Materials, 8, No. 11, pp. 1140-1145. (DOI: 10.1002/adem.200600130)

Aust, N. (10/2006). "Optimization of run parameters of temperature rising elution fractionation with the aid of a factorial design experiment", Polymer Testing 25, pp. 896-903. (DOI: 10.1016/j.polymertesting.2006.05.008)

Pinter, G., Ladstätter, E., Billinger, W., Lang, R.W. (10/2006). "Characterization of the tensile fatigue behaviour of RTM laminates by isocyclic stress-strain-diagrams", International Journal of Fatigue 28, pp. 1277-1283. (DOI: 10.1016/j.ijfatigue.2006.02.012)

Steinberger, R., Leitao, T., Ladstätter, E., Pinter, G., Billinger, W., Lang, R.W. (10/2006). "Infrared thermographic techniques for non-destructive damage characterization of carbon fibre reinforced polymers during tensile fatigue testing", International Journal of Fatigue, 28, pp. 1340-1347. (DOI: 10.1016/j.ijfatigue.2006.02.036)

Seyfriedsberger, G., Rametsteiner, K., Kern, W. (9/2006). "Polyethylene compounds with antimicrobial surface properties", European Polymer Journal 42, pp. 3383-3389. (DOI: 10.1016/j.eurpolymj.2006.07.026)

Vincze-Minya, A.-K. (7/2006). "Influence of the molecular structure on the viscoelastic behavior of polymer blends", Monatshefte für Chemie, 137, pp. 911-918.

Wallner, G., Oreski, G. (7/2006). "Structure-Infrared Optical Property-Correlations of C,O,H-Polymers for Transparent Insulation and Greenhouse Applications", Monatshefte für Chemie 137, pp. 899-910. (DOI: 10.1007/s00706-006-0491-3)

Wallner, G., Resch, K., Teichert, C., Gahleitner, M., Binder, W. (7/2006). "Effect of Material Structure and Additives on the Optical Properties of PP Cast Films", Monatshefte für Chemie 137, pp. 887-897. (DOI: 10.1007/s00706-006-0480-6)

Buchgraber, C., Pogantsch, A., Kappaun, S., Spanring, J., Kern, W. (6/2006). "Luminescent Copolymers for Applications in Multicolor-Light-Emitting Devices", Journal of Polymer Science: Part A: Polymer Chemistry, Vol. 44, pp. 4317-4327. (DOI: 10.1002/pola.21539)

Janeschitz-Kriegl, H., Eder, G., Ratajski, E. (6/2006). "A process classification number for the solidification of crystallizing materials", Intern. Polym. Processing, XXI, 5, pp. 521-526.

Gruber, D., Wallner, G., Buder-Stroissnigg, M., Strauss, B., Jandel, L., Lang, R.W. (5/2006). "Charakterisierung des Oberflächenerscheinungsbildes organisch bandbeschichteter Stahlbleche für Automobilanwendungen", BHM Berg- und Hüttenmännische Monatshefte 05/2006, pp. 205-208.

Oreski, G., Wallner, G. (4/2006). "Structure-infrared optical property-correlations of polar ethylene copolymer films for solar applications", Solar Energy Materials & Solar Cell, 90, pp. 1208-1219. (DOI: 10.1016/j.solmat.2005.07.005)

Resch, K., Wallner, G., Teichert, C., Maier, G., Gahleitner, M. (3/2006). "Optical properties of highly transparent Polypropylene Cast Films: Influence of Material Structure, Additives and Processing Conditions", Polymer Engineering and Science, Vol. 46, Issue 4, pp. 520-531. (DOI: 10.1002/pen.20503)

2005

Gruber, D., Meinhardt, G., Papousek, W. (12/2005). "Spatial distribution of light absorption in organic photovoltaic devices", Solar Energy, 79, pp. 697-704.

Spanring, J., Buchgraber, C., Ebel, M., Svagera, R., Kern, W. (12/2005). "Trialkylsilanes as reagents for the UV-inducted surface modification of polybutadiene", Polymer, 47, pp. 156-165. (DOI: 10.1016/j.polymer.2005.11.016)

Spanring, J., Buchgraber, C., Ebel, M., Svagera, R., Kern, W. (12/2005). "UV assisted surface modification of polystyrene in the presence of trialkylsilanes", Macromolecular Chemistry and Physics 2005, 206, pp. 2248-2256. (DOI: 10.1002/macp.200500304)

Talvensaari, H., Ladstätter, E., Lang, R.W., Billinger, W. (12/2005). "Permeability of Preform Packages", Composite Structures, Vol. 71, pp. 341-377. (DOI: 10.1016/j.compstruct.2005.09.033)

Temmel, S., Kern, W., Luxbacher, T. (12/2005). "Zeta Potential of photochemically modified polymer surfaces", Progress in Colloid and Polymer Science, 132, (Springer-Verlag, Berlin Heidelberg, Hrsg.), pp. 54-61. (DOI: 10.1007/2882_032)

Wallner, G., Lang, R.W., Schobermayer, H., Hegedys, H., Hausner, R. (12/2005). "Application Demonstration of a Novel Polymer Based Transparent Insulation Wall Heating System", Solar Energy Materials & Solar Cells, 84, pp. 441-457.

Wallner, G., Platzer, W. (12/2005). "Structure-property correlations of polymeric films for transparent insulation wall applications. Part I: Solar optical properties", Solar Energy, 79, pp. 583-592. (DOI: 10.1016/j.solener.2005.05.006)

Wallner, G., Platzer, W., Lang, R.W. (12/2005). "Structure-property correlations of polymeric films for transparent insulation wall applications. Part II: Infrared optical properties", Solar Energy, 79, pp. 593-602. (DOI: 10.1016/j.solener.2005.05.007)

Buchgraber, C., Spanring, J., Kern, W., Pogantsch, A (11/2005). "UV-induced Modification of Conjugated Polymers using Gaseous Organosilanes", Macromolecular Chemistry and Physics, 206, pp. 2362-2372. (DOI: 10.1002/macp.200500353)

Oreski, G., Wallner, G. (11/2005). "Aging mechanisms of polymer films for PV encapsulation", Solar Energy, 79, pp. 612-617.

Wallner, G, Lang R.W. (11/2005). "Aging of polymeric films for transparent insulation wall applications", Solar Energy, 79, pp. 603-611. (DOI: 10.1016/j.solener.2005.05.001)

Buder-Stroissnigg, M., Wallner, G.M., Gruber, D., Strauss, B., Jandel, L., Lang, R.W. (9/2005). "Kunststofftechnische Aspekte bei der Entwicklung organisch bandbeschichteter Stahlbleche für Automobilanwendungen", BHM Berg- und Hüttenmännische Monatszeitschrift, 150. Jg. 2005 (9), pp. 293-296.

Janeschitz-Kriegl, H., Ratajski, E. (9/2005). "Kinetics of polymer crystallization under processing conditions: transformation of dormant nuclei by the action of flow", Polymer, 46, pp. 3856-3870. (DOI: 10.1016/j.polymer.2005.02.096)

Oreski, G., Wallner, G. (9/2005). "Delamination behavior of multi-layer films for PV encapsulation", Solar Energy Materials & Solar Cell 89, pp. 139-151. (DOI: 10.1016/j.solmat.2005.02.009)

Maier, G., Wallner, G., Lang, R.W., Fratzl, P. (6/2005). "Structural Changes during Plastic Deformation at Crack Tips in PVDF Films: A Scanning X-ray Scattering Study", Marcomolecules 38 (14), pp. 6099-6105. (DOI: 10.1021/ma050390f)

Stadlbauer, M., Janeschitz-Kriegl, H., Eder, G., Ratajski, E. (6/2005). "New extensional rheometer for creep flow at high tensile stress. Part II. Flow induced nucleation for the crystallization of iPP", Journal of Rheology 48(2004), 631-639.

Janeschitz-Kriegl, H., Eder, G., Stadlbauer, M., Ratajski, E. (5/2005). "A thermodynamic frame for the kinetics of polymer crystallization under processing conditions", Chemical Monthly 136(2005), 1119-1137. (DOI: 10.1007/s00706-005-0328-5)

Temel, A., Schaller, R., Höchtl, M., Kern, W. (5/2005). "Determination of residual vulcanization accelerators in natural rubber latex films using FTIR spectroscopy", Rubber Chemistry and Technology, 78/1, pp. 28-41.

Gruber, D., Meinhardt, G,. Papousek, W. (4/2005). "Modeling the light absorption in organic photovoltaic devices", Solar Energy Materials & Solar Cells 87, pp.215-223.

Pinter, G., Haager, M., Balika, W., Lang, R.W. (3/2005). "Fatigue crack growth in PE-HD pipe grades", Plastics, Rubbers and Composites, Macromolecular Engineering, 34 (1), pp. 25-33. (DOI: 10.1179/174328905X29758)

Pogantsch, A., Rentenberger, S., Langer, G., Keplinger, J., Kern, W., Jojer, E. (3/2005). "Tuning the Elecroluminescene Color in Polymer Light-Emitting Devices Using the Thiol-Ene Photoreaction", Advanced Functional Materials 15, No. 3, pp. 403-409.

2004

Gahleitner, M., Jääskeläinen, P., Ratajski, E., Paulik, C., Reussner, J., Wolfschwenger, J., Neißl, W. (12/2004). "Polypropylene-Ethylene Random Copolymers: Comomer Effects on Crystallinity and Application Properties", Journal of Applied Polymer Science, Vol. 95, pp. 1073-1081.

Meyer, U., Köstler, S., Ribitsch, V., Kern, W. (12/2004). "Photochemical Surface Modification of Polytetrafluoroethylene with Hydrazine: Characterization of the Surface with Zeta-Potential Measurements and Spectroscopic Techniques", Macromolecular Chemistry and  Physics, Vol. 206, pp. 210-217.

Haager, M., Pinter, G., Lang, R.W. (11/2004). "Estimation of Slow Crack Growth Behavior in Polyethylene after Stepwise Isothermal Crystallization", Macromolecular Symposia, Vol. 217, pp. 383-390. (DOI: 10.1002/masy.200451334)

Pinter, G., Haager, M., Wolf, C., Lang, R.W. (11/2004). "Thermo-Oxidative Degredation during Creep Crack Growth of PE-HD Grades as Assessed by FT-IR Spectroscopy", Macromolecular Symposia, Vol. 217, pp. 307-316.

Wendel, B., Kern, W., Droschl, H. (11/2004). "A comparative study of polymerization lamps to determine the degree of cure of composites using infrared spectroscopy", European Journal of Orthodontics,  Vol. 26 no 5, pp. 545 - 551.

Buchgraber, C., Spanring, J., Pogantsch, A., Turner, M., Kern, W. (10/2004). "Organosilanes as new reagents for the photopatterning of PPV type polymers", Synthetic Metals 147, pp. 91-95.

Buder-Stroissnigg, M., Wallner, G.M., Strauss, B (9/2004). "Deformationsverhalten und Erscheinungsbild von bandbeschichteten Stahlblechen für Automobilanwendungen", Berg- und Hüttenmännische Monatshefte (BHM) 9, pp. 313-317.

Wallner, G., Lang, R.W., Schobermayer, H., Hegedys, H., Hausner, R. (8/2004). "Development and Application Demonstration of a Novel Polymer Film Based Transparent Insulation Wall Heatin System", Solar Energy Materials and Solar Cells, 84/1-4, pp. 441-457.

2003

Major, Z., Lang, R.W. (10/2003). "Rate dependent fracture toughness of plastics", Journal de Physique IV, pp. 531-536.

Publications in Non Refereed Journals

2022

Weinhold, G., Kerschbaumer, R.C., Hornbachner, M., Leins, F. (09/2022). "Integrative Simulation des mechanischen Verhaltens von Elastomerbauteilen", KGK - Kautschuk Gummi Kunststoffe, Vol. Mai 22, pp 16 - 19

2021

Tune, D., Rössler, T., Oreski, G., Carriere, C., Kaiser, K., Timofte, T., Klasen, N., Weber, J., Jäckel, B., Großer, S., Pader, M., Turek, M., Galiazzo, M., Devoto, I., Fischer, T., Ullmann, I., Rudolph, D., Halm, A. (12/2021), "The sun is rising on conductive adhesives", Photovoltaics International, Vol. 47, pp 57 - 78

Van Laak, H., Heimink, J., Frank, A., Messiha, M., Kratochvilla, T.R., Bruckner, C. (02/2021). "Polyamide 12 for Gas Piping Systems with MOP 16/18 bar - Fitness for Alternative Installation Techniques demonstrated beyond PAS 1075", 3R - Rohre, Vol. Special 01/2021, pp 6

2020

Malik, M.S. (12/2020). "Just a few minutes Self-sustaining curing reaction cuts down cycle time of cured epoxy from hours to few minutes", CU Reports, Vol. 02, pp1, https://digitalmagazin.b4bschwaben.de/de/profiles/610b21560ff9/editions/40db55655ba226a40a41/pages

Stiller,T. ,Hausberger, A. (12/2020). "Quantification of the load velocity performance limit of tribological coatings via a breakaway torque bench mark test method", https://www.anton-paar.com/corp-en/services-support/document-finder/application-reports/velocity-temperature-superposition-friction-master-curve/

 2019

Oreski, G., Pötz, S., Omazic, A., Eder, G., Hirschl, C., Neumaier, L., Scheurer, J., Pranger, W. (03/2019). "Reliability of electrically conductive adhesives", Photovoltaics International, Vol., 42, pp 38 - 45

2017

Frank, A., Berger, I. J., Pinter, G., Nitsche, D., Petry, D. "Comparison of real and simulated failure times of electrofusion sockets made of polyethylene", Joining Plastics, Vol. 11 (2017), Nr. 3/4, pp 158 - 164

Schlögl, S. (09/2017). "Thiol-Ene versus Binary Thiol-Acrylate Cehmistry: Material Properties and Network Characteristics of Photopolymers", Advances in Engineering, Online Journal: https://asvanceseng.com/chemical-engineering/thiol-ene-versus-binary-thiol-acrylate-chemistry/

2016

Margossian, A., Bel, S., Hinterhölzl, R. (12/2016). "On the modeling of separation foils in thermoforming simulations", AIP Conference Proceedings, Vol. 1769, Issue 1, 6 pages

Fasching, M., Friesenbichler, W., Leitner, E., Berger, G. (10/2016). "A New Device for Measuring Shear Viscosity of Rubbers on a Rubber Injection Molding Machine", Proceedings of the Internationl Rubber Conference 2016, 2 pages

Luef, K., Kelly, A., Fimberger, M., Wiesbrock, F. (08/2016) "Long-lasting antimicrobial equipment of surfaces: Partially hydrolyzed poly(2-oxazoline)s and poly(2-oxazine)s as biocidal additives in commodity materials", Abstracts of Papfers, 252nd ACS National Meeting & Exposition, POLY-458

Luef, K., Petit, C., Grassl, B., Stelzer, F., Reynaud, S., Wiesbrock, F. (08/2016). "Photoresists based on coconut and castor oil", Abstracts of Papers, 252nd ACS National Meeting & Exposition, POLY-76

Luef, K., Wiebrock, F. (08/2016). "Parameters determining the hydrolysis rates of poly(2-oxazolines)s", Abstracts of Papers, 252nd ACS National Meeting & Exposition, POLY-307

Wiesbrock, F., Fimberger, M., Tsekmes, I., Kochetov, R., Smit, J. (08/2016). "Crosslinked poly(2-oxazoline)s derived from renewable resources: Green alternatives for polyamides as insulators in electronic applications", Abstracts of Papers, 252nd ACS National Meeting & Exposition, POLY-189

2015

Klein, A., Blees, E., Resch, K. (12/2015). "Heute schon an morgen denken", Recycling Magazin, Vol 19, pp 30 - 33

Rossegger, E., Schenk, V., Höpfner, M., Wiesbrock, F. (1/2015). "RGD-functionalized poly(2-oxazoline)-based paricles as potential drug carriers", Abstracts of papers / American Chemical Soceiety, Vol. 248, 212-POLY-212-POLY

Luef, K. P., Schenk, V., Fimberger, M., Wiesbrock, F. (1/2015). "Models, light, and click: Functionalization of 2-oxazoline monomers and poly(2-oxazoline)s by thiol-ene click reactions", Abstracts of papers /American Chemical Society, Vol. 248 (2014), 548-POLY-548-POLY

Fimberger, M., Wiesbrock. F. (1/2015). "Highly reactive poly(2-oxazoline)-based photoresits with tunable properties", Abstracts of papers /American Chemical Society, Vol. 248 (2014), 547-Poly-547-Poly

Luef, K. P., Payerl, C., Wiesbrock, F. (1/2015). "Copolymers of poly/(2-oxazoline) and PEG or polyesters as drug depots", Abstracts of papers /American Chemical Society, Vol. 248 (2014), 215-POLY-215-POLY

2014

Schlögl, S., Lenko, D. (11/2014). "High-voltage insulation with enhanced delamination resistance", Plastics Research Online

Fasching, M., Berger, G., Friesenbichler, W., Filz, P., Helbich, B. (10/2014). "Robuste Prozessführung beim Kautschukspritzgießen unter Nutzung systematischer Simulation und verbesserter Materialdaten", GAK-Gummi Fasern Kunststoffe, pp 640 - 644

Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Kern, W. (9/2014). "Epoxy-Based Composites with Modified Elastomeric Damping Layers: New Approaches for the Manufacture of High Voltage Insulations with Improved Delamination Resistance", 22nd Annual International Conference on Composites/Nanoengeineering (ICCE-22), 2 pages

Oreski, G., Knausz, M., Berger, K. A., Eder G. C., Voronko, Y., Koch, T. Pinter, G. (9/2014). "Reliability testing of backsheets: Thermal analysis for comparing single and module aged films", Photovoltaics International

2013

Wolfahrt, M., Cichosz, J., Gager, J., Fleischmann, M. (12/2013). "Materialmodellierung von kohlenstofffaserverstärkten Geflechtlaminaten", lightweightdesign, pp. 42-47.

2012

Hirner, M., Langecker, G. R. (9/2012). "A Knowldedge Management System for Injection Moulds", Kunststoffe international, 7/12, pp. 38-40.

Hirner, M., Langecker, G. R. (9/2012). "Wissensmanagementsystem für Spritzgießwerkzeuge", Kunststoffe, 7/12, pp. 56-58.

Lenko, D., Schlögl, S., Kern, W., Bichler, S., Lemesch, G., Ramsauer, F. (1/2012). "Investigation on failure mechanisms of electrical insulation in high voltage application", VLK News 18, pp. 22-23.

2011

Berger, G.R., Roock, S., Steinbichler, G. (9/2011). "Mehr Glanz, weniger Bindenähte", Kunststoffe, vol. 7/2011, pp. 35-38.

Berger, G.R., Roock, S., Steinbichler, G. (9/2011). "More Gloss, less weld lines", Kunststoffe international, vol. 07/2011, pp. 26-29.

2010

Schlögl, S., Temel, A., Schaller, R., Holzner, A., Kern, W. (11/2010). "Biological evaluation and chemical characterization of photochemically crosslinked surgical gloves", Rubber World, Vol. 243/2, pp. 17-20.

Hecke, A., Wirnsberger, B., Kelly, A., Stelzer, F., Wiesbrock, F. (9/2010). "Oxazoline-Based Hydro-, Amphi-, and Lipogels from Microwave-Assisted Synthesis", Scientia pharmaceutica, 2010/77/3, pp. 660.

2009

Frank, A., Haager, M.,  Hofmann, A., Pinter, G. (10/2009). "Close-Fit Relining - Verfahrensbedingte Beeinflussung der Werkstoffeigenschaften und des Rohrlangzeitverhaltens", 3R international 48 (11), pp. 639-645.

Berger, G.R., Friesenbichler, W., Schöfer, G., Freudenschuß, G. (6/2009). "Demolding forces and coefficients of friction in injection molding. A new instrumented mold and first results", Plastics Age, Vol. 55, pp. 87-94.

Guster, C., Eichlseder, W., Pinter, G., Lang R.W. (6/2009). "Kurzglasfaserverstärkte Kunststoffe - Charakterisierung der Werkstoffaniosotropie und Untersuchung deren Einfluss auf das Schwingfestigkeitsverhalten", VLK-News, 15. Jahrg., Ausgabe 2/2007, pp. 16-20.

Ridder, H., Heim, H.P. (5/2009). "Möglichkeiten und Grenzen variothermer Werkzeugkonzepte", Kunststoffe, Nr. 5/2009, pp. 22-29.

2008

Hadzima, B., Škorík, V., Borbás, L., Oláh, L. (10/2008). "Corrosion of biocompatible AISI316 stainless steel in physiological solution", Materials Enginnering, Vol. 15, Nr. 3, pp. 27-30.

Lucyshyn, T., Langecker, G.R., Fischer, K. (10/2008). "Measurement of pvt-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data", VLK-News, 2/2008, pp. 4-7.

Vezér, S., Major, Z. (3/2008). "Analog triggered image acqusition method for optical measurement under cycic load conditions", Materials Engineering, No. 1/2008, pp. 5-13.

Gruber, D.P., Berger, G.R., Friesenbichler, W. (1/2008). "Charakterisierung von Spritzgieß-Formteiloberflächen", KC-aktuell 1/2007, pp. 2-3.

2006

Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T., Lang, R.W. (11/2006). "Prüfungs- und Versagensanalyse für die explosive Dekompression elastomerer Dichtungen", GAK Gummi Fasern Kunststoffe, 11/2006, pp. 685-694.

Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T., Lang, R.W. (10/2006). "Test and failure analysis methodology for elastomeric seals exposed to explosive decompression", RFP Rubber Fibers Plastics International, 10/2006, pp. 93-100.

Berger, G.R., Friesenbichler, W., Langecker, G.R. (3/2006). "Topographiemessung an Kunststoff- und Metalloberflächen", VLK-News, 01/2006, Leoben, A.

2005

Ladstätter, E., Pinter G., Billinger, W., Lang, R.W. (12/2005). "Fatigue behavior of RTM laminates", VLK News, 3/2005, pp. 4-7.

Wallner, G., Lang, R.W. (12/2005). "Guest Editorial", Solar Energy, 79, pp. 571-572.

Lang, R.W., Pinter, G., Balika, W. (1/2005). "Konzept zur Nachweisführung für Nutzungsdauer und Sicherheit von PE-Druckrohren bei beiliebiger Einbausituation", 3R International 44 (1-2 / 2005), pp. 33-41.

2004

Lucyshyn, T., Fischer, K., Langecker, G.R. (11/2004). "3D-Bauteilvermessung im Spritzguss-Werkzeug", VLK-News, 3/2004, pp. 8-11.

Haager, M., Pinter, G., Lang, R.W. (8/2004). "Ermüdungsrisswachstum in PE-Rohrwerkstoffen", 3R-International Nr. 43 8/9 2004, pp. 492-496.

Godor, I., Major, Z. (6/2004). "Einige Ergänzungen zur Funktion von druckbelasteten Dichtflächen aus PTFE-Bronze Compounds", ÖIAZ 149, pp. 182-187.

Haager, M., Pinter, G., Lang, R.W. (6/2004). "Moderne Prüfmethoden für Polyethylen Rohrwerkstoffe", KC-aktuell, 02/2004, pp. 2-3.

2003

Wallner, G. (11/2003). "1. Leobener Symposium Polymeric Solar Materials", VLK News 4/2003,  pp. 11-16.

Major, Z., Lang, R.W., Feichter, C. (10/2003). "Elasztomerek fàrasztòvizsgàlata", Anyagvizsgàl`k Lapja 2003/4,  pp.118-122.

Berger, G. R., Friesenbichler, W. (2/2003). "Reproduzierbare Herstellung von Oberflächenstrukturen und Oberflächenqualitäten an Spritzgießteilen", VLK News, 02/2003, pp. 4.

Conference Papers

2023

Jafari-Tabrizi, A., Ules, T., Grießer, M., Tranchida, D., Gruber, D. P. (06/2023). "A robot-based measurement setup for tactile surface classification", ASPAI 2023 Conference Proceedings, pp 175 - 158

Krassnig, P.J., Haselmann, M., Gruber, D. P. (06/2023). "Inspection approach for automated in-line defect detection on decorated foil plates", Conference Proceedings - 4th International Conference on Advances in Signal Processing and artificial Intelligence (ASPAI' 2022), e-ISBN: 978-84-09-45050-3

Jafari-Tabrizi, Gruber, D. P.,  Gams, A. (05/2023). "Modification and Optimization of the Trajectory of an Industrial Robot to Scan a 3D-Surface for Quality Inspection", Advances in Service and Industrial Robotics. RAAD 2023, Vol. 135, pp 223 - 341, DOI: 10.1007/978-3-031-32606-6_39

Christöfl, P., Jakes, J. E., Geier, J., Pinter, G., Oreski, G., Stone, d., Teichert, C. (04/2023), "Improved NI methods for polymer based multilayer film cross- sections", IEEE, pp 1- 8, DOI: doi: 10.1109/EuroSimE56861.2023.10100815

Hinczica J., Messiha M., Koch T., Frank A., Pinter G. (03/2023), "Influence of Recyclates on Mechanical Properties and Lifetime Performance of Polypropylene Materials", Procedia Structural Integrity, Vol. 42, pp 8, 139-146, DOI 10.1016/j.prostr.2022.12.017

2022

Malik, M.S., Grasser, V., Wolfahrt, M., Schlögl, S., Pinter, G. (12/2022). "Addressing the challenges in frontal curing of high-performance carbon fiber reinforced composites", Conference paper, Proceedings of the 20th European Conference on Composite Materials - Composites Meet Sustainability (Vol 1-6), pp 587-593, DOI 10.5075/epfl-298799_978-2-9701614-0-0

Barretta, C., Bredacs, M., Helfer, E., Christöfl, P., Macher, A., Oreski, G. (11/2022). "What Are PVDF-Based Backsheets Made Of?", Proceedings of 2022 IEEE 49th Photovoltaics Specialists Conference (PVSC), pp 4, 0633-0636, DOI 10.1109/PVSC48317.2022.9938844

Gehling, T., Kerschbaumer, R.C. , Fasching, M., Pinter, G. (11/2022). "Influence of the curing state on the fatigue behavior of nitrile butadiene rubber", Veröffentlichung, Constitutive Models for Rubber XII, Vol. 12, pp 6, DOI 10.1201/9781003310266-58

Oreski, G., Barretta, C., Macher, A., Eder, G., Neumaier, L., Feichtner, M., Aarnio Winterhof, M. (11/2022), "Investigation of the crack propensity of co-extruded polypropylene based backsheets", 2022 IEEE 49th Photovoltaics Specialists Conference (PVSC), Vol. 2022, pp 0485 - 0488, DOI: https://doi.org/10.1109/PVSC48317.2022.9938658

Barretta, C., Macher, A., Ascencio-Vasquez, J., Topic, M., Köntges, M., Oreski, G. (11/2022), "Degradation of Crystalline Silicon Photovoltaic Modules Installed in Different Climates", Proceedings of 2022 IEEE 49th Photovoltaics Specialists Conference (PVSC), pp 3, 0680-0682, 10.1109/PVSC48317.2022.9938590

Haselmann M., Krassnig, P. J., Gruber, D. P. (10/2022). "Visual inspection of patterned surfaces with supervised deep learning
using both real and synthetic defects", 4th International Conference on Advances in Signal Processing and Artificial Intelligence (ASPAI' 2022)

Kerschbaumer, R., Friesenbichler, W. (09/2022). "12 years of research in rubber injection molding at MUL and PCCL", Tagungsband 30. Leobner Kunststoffkoloquium 2022, pp 82

Pommer, R., Saf, R., Supplit, R., Holzner, A., Trimmel, G. (09/2022). "Thermo-responsive shape-memory behavior of elastomer-thermoplastic-blends", sciMeetings (ACS Fall Conference Archive), https://doi.org/10.1021/scimeetings.2c00327

Traintinger, M., Lechner, B; Kerschbaumer, R., Friesenbichler, W. (09/2022). "Product-adaptive process control of rubber injection molding by means of quality functions", Tagungsband 30. Leobener Kunststoffkoloquium 2022, pp 93

Gruber, D. P., Steiner, A. Aminabadi, S.S., Friesenbichler, W. (09/2022). "A new quality predictor and controller by means of artificial intelligence for an injection molding process", Tagungsband, 30. Leobener Kunststoffkolloquium, pp 11

Morosavljevic, J., Kozak, D., Morosavljevic, I., Raguž, I. (09/2022). "Digital rotary incremental encoder for educational purposes",  TEAM2022 proceedings, pp 7, 233-239

Traintinger, M., Lechner, B., Kerschbaumer, R., Friesenbichler, W. (06/2022). "Cycle time reduction in rubber injection molding - a numerical approach to optimize the process window and maintain the quality of the rubber part", DKT 2022, Digitaler Konferenzband

Gabriel, S., Primetzhofer, A., Pinter, G., Grün, F. (06/2022). "Influence of viscoelasticity on fatigue behavior of short fibre reinforced polymers depending on mean stress and fibre reorientation", ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, 3, pp. 861-868 (2022)

Gschwandl, M., Friedrich, B., Pfost, M., Antretter, T., Fuchs, P.F., Mitev, I., Tao, Q., Schingale, A. (06/2022), "Towards electro-thermo-mechanical lifetime assessment for arbitrary power electronics", Microelectronics Reliability, 133, art. no. 114537, (2022). https://doi.org/10.1016/j.microrel.2022.114537

Ules, T., Griesser, M., Schlögl, S., Gruber, D .P. (06/2022), "Tactile friction and perception of UV-curable coatings and its  relation to physical surface parameters", 17th Coatings Science International 2022, COSI 2022, Noordwijk, The Netherlands; Book of Abstracts, pp 22-25

Fuchs, P. F., Novak, P.M., Lang, M., Qi, T., Zündel, J., Gschwandl, M., Antretter, T. (06/2022), "Determining the influence of the level of detail in FEA modeling on the warpage prediction of PCBs", ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, 2, pp. 326-333 (2022)

Afsharnia, R., Stadler, G., Primetzhofer, A., Pinter, G. G., & Oswald-Tranta, B. (06/2022), "Consideration of orthotropic thermal properties of short fibre reinforced plastics", ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, 4, pp. 356-363 (2022)

Hinterhölzl, R. M., Shehata, K., Sendner, F. M., Wolfahrt, M., Schneiderbauer, G., Glinz, J., Semlitsch, K. H., Thor, M. (06/2022), "Design for innovative and cost-efficient manufacturing of composite sandwich structures with foam molded cores for high-rate production of wing moveables", ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, 5, pp. 394-400 (2022)

Primetzhofer, A., Petermann, S., Dietsch, R., Leßlhumer, J., Arbeiter, F., Pinter, G. (06/2022), "Life time estimation of 3D printed continuous fiber reinforced parts under fatigue loading", ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, 3, pp. 791-797 (2022)

Griesser, M., Ules, T., Schipfer, C., Fuchs, P., Gruber, D. P. (05/2022), "Simulating the Influence of Surface Hardness on the Contact Area Formation for Dry and Moist Finger Skin Contact", Conference Proceedings - 13th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2022, Hamburg, Germany, e-ISBN: 978-3-031-06249-0

Thalhamer,  A., Fuchs, P., Strohmeier, L., Hasil, S., Wolfberger, A. (04/2022), "A Simulation-Based Assessment of Print Accuracy for Microelectronic Parts Manufactured with DLP 3D Printing Process", Proceedings of EuroSimE 2022, pp 10, 10.1109/EuroSimE54907.2022.9758869

Schipfer, C., Fuchs, P., Morak, M., Tao, Q., Zuendel, J. (04/2022), "Pressing Simulations within the PCB Manufacturing Framework", 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Vol. 21708657, pp 5, DOI 10.1109/EuroSimE54907.2022.9758910

Peng, C., Morak, M., Thalhamer, A., Gschwandl, M., Fuchs, P., Tao, Q., Krivec, T., Antretter, T., Celigueta, M. (04/2022), "Characterization and Modeling of a Typical Curing Material for Photresist Films", 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, pp 7, DOI10.1109/EuroSimE54907.2022.9758849

2021

Vryonis, O., Marx, P., Hirner, S., Wiesbrock, F., Andritsch, T. (12/2021), "Investigation of Different Commercial Boron Nitride Grades and their Effect on Loss Spectra in Epoxy Resins and Silicone Rubbers", Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP, 2021-December, pp. 430-433 (2021). https://doi.org/10.1109/CEIDP50766.2021.9705404

Morak, M. (12/2021). "Modelling and Simulation of the long-term Behavior of Thermoplastics in LS-Dyna", dynamore, vol. 13th European LS-Dyna Conference, pp 10

Weiss, K.A., Kaayaa, I., Bruckman, L., French, R., Tanahashi, T. (12/2021). "Needs, Challenges and Approaches for new Service Life Estimation Models for PV Modules – Results from IEA-PVPS- Task 13 Subtask 1.4", Conference Proceedings of European Photovoltaic Solar Energy Conference and Exhibition, Vol. 2021, pp 538 - 539, DOI: 10.4229/EUPVSEC20212021-4BO.1.2

Frank, A., Messiha, M., Dreiling, G., Schuler, N., Storheil, J.M., Mayrbäurl, E., Ramella, S., Krause, F., Berning, R., Gabriëls, P., Ademir, A., Koch, T., Arbeiter, F., Pinter, G. (09/2021) "Slow crack growth resistance of reprocessed PVC", Proceedings PPXX 2021, Vol. 2021, pp 10

Beter J., Schrittesser B., Fuchs P. F., Pinter G. (09/2021), "New Technique for Smart Flexible Composite Architectures", Tagungsband 29. Leobner Kunststoffkoloquium 2021

Ceglar, T., Pettermann, H. E. (09/2021), "Homogenization of Fiber Reinforced Elastomer Laminates", VIII Conference on Mechanical Response of Composites, pp 7, DOI 10.23967/composites.2021.031

Barretta C., Oreski G., Kyranaki N., Mansour D. E., Betts T. R., Pitta Bauermann L., Resch-Fauster K. (08/2021), "Effects of artificial ageing tests on EVA degradation: influence of microclimate and methodology approach", 2021 IEEE 48th Photovoltaic Specialists Conference (PVSC), Vol. 2021, pp 0312 - 0315, DOI: 10.1109/PVSC43889.2021.9518725

Voronko, Y., Eder, G., Breitwieser, C., Mühleisen, W., Neumaier, L., Feldbacher, S., Oreski, G., Lenck, N. (08/2021), "Repair of cracked polyamide backsheets", Conference Record of the IEEE Photovoltaic Specialists Conference, Vol. 2021, pp 507 - 509, DOI: 10.1109/PVSC43889.2021.9518808

Oreski, G., Macher, A., Resch-Fauster, K. (08/2021), "Low temperature induced physical aging effects of backsheet materialsLow temperature induced physical aging effects of backsheet materials", 2021 IEEE 48th Photovoltaic Specialists Conference (PVSC), Vol. 2021, pp 818 - 821 DOI: 10.1109/PVSC43889.2021.9518999

 Jafari-Tabrizi, A., Gruber, D. P. (08/2021), "Reinforcement-Learning-based Control of an Industrial Robotic Arm for following a Randomly-Generated 2D-Trajectory", International Conference on Omni-Layer Intelligent Systems, COINS 2021Virtual, Barcelona, DOI
10.1109/COINS51742.2021.9524158

Ules, T., Griesser, M., Klimke, K., Grestenberger, G., Gruber, D. P. (07/2021), "Evaluation of Tactile Friction, Vibrations and the Influence of Finger Skin Moisture on Grained Polypropylene Plates", 2021 IEEE World Haptics Conference (WHC), pp. 1, pp 343-343, doi.org/10.1109/WHC49131.2021.9517243

Griesser, M., Ules, T., Schlögl, S., Gruber, D. P. (07/2021), "Investigating the Influence of Surface Hardness and Energy on the Perceived Stickiness of Polymer Coatings", 2021 IEEE World Haptics Conference (WHC), pp. 1, pp 1148-1148, doi.org/10.1109/WHC49131.2021.9517262

Voronko, Y., Eder, G., Breitwieser, C., Mühleisen, W., Neumaier, L., Feldbacher, S., Oreski, G., Lenck, N. (06/2021), "Repair of cracked polyamide backsheets", Conference Record of the IEEE Photovoltaic Specialists Conference, Vol. 2021, pp 507 - 509, DOI: 10.1109/PVSC43889.2021.9518808

Regal, G., Egger-Lampl, S., Bieg, T., Ules, T., Tscheligi, M., Gruber, D. P. (06/2021), "How does it feel? - Investigating soft-touch surface experience dimensions", 13th International Conference on Quality of Multimedia Experience, online, Volume 2021-January, Pages 181 - 186, DOI: 10.1109/QoMEX51781.2021.9526677

Gschwandl, M., Pfost, M., Antretter,T., Fuchs P.F., Mitev I., Tao, Q., Schingale, A. (04/2021), "Electro-Thermo-Mechanical Reliability Assessment of Arbitrary Power Electronics", 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021, DOI
10.1109/EuroSimE52062.2021.9410862, online

Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q., Schingale, A. (04/2021), "Prediction of Curing Induced Residual Stresses in Polymeric Encapsulation Materials for Microelectronics", IEEE Xplore, pp 8, DOI: 10.1109/EuroSimE52062.2021.9410855

Major, Z., Lang, R.W. (03/2021). "Rate dependent fracture toughness of plastics", in Proc. "MicroCAD", (University of Miskolc, Hrsg.), pp. 77-84

2020

Slavik, O., Hutar, P. ,Berer, M. ,  Gosch ,A., Vojtek ,T., Arbeiter, F.,  Nahlik, L. (12/2020). "Stress intensity factors in novel specimens for crack propagation under loading conditions II+III in polymers", AIP Conference Proceedings, Vol.2309,pp 6,https://doi.org/10.1063/5.0035090

Gosch, A., Geier, J., Arbeiter, F.,Berer, M.,Pinter, G. (12/2020). "Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers", Procedia Structural Integrity, Vol.28, pp1184-1192,https://doi.org/10.1016/j.prostr.2020.11.100

Yalagach, M., Fuchs, P.F., Antretter, T., Qi, T., Weber, M. (12/2020). "Numerical analysis of a MEMS sensor's deformation behavior considering dynamic moisture conditions", 2020 IEEE 22nd Electronics Packaging Technology Conference, EPTC 2020 Article number 9315091, Pages 380-385

Röper, F., Plank, B., Glinz, J., Wolfahrt, M., Kucher, G., Pinter, G. (03/2020). "X-ray computed tomography in bonded aircraft repairs for composites", NDTnet, 6 S., Open Access Portal of Nondestructive Testing (NDT)

 

2019

Traintinger, M., Lechner, B., Kerschbaumer, R. C., Friesenbichler, W. (09/2019). "Considerations on Curing Kinetics and Part Qualitiy of Industrially Manufactured Styrene-Butadien Rubber with Respect to Batch Variations", Book of Papers, IRC2019, ISBN 1-86125-186-6

Jafari-Tabrizi, A., Lichtenegger, H. L., Gruber, D. P. (09/2019). "A Method for the Evaluation and Classification of the Orange Peel Effect on Painted Injection Moulded Part Surfaces", 9th Iberian Conference on Pattern Recognition and Image Analysis, lbPRIA 2019, Conference Book, Vol. 11868, DOI: 10.1007/978-3-030-31321-0_39

Agroui, K., OReski, G. (09/2019). "In situ durability of EVA polymer encapsulant with optical analysis techniques for photovoltaic conversion application", Proc. SPIE 11121, New Concepts in Solar and Thermal Radiation Conversion ll, p 111210G, DOI: 10.1117/12.2525373

Moulai, F., Argoui, K., Oreski, G., Barretta, C. (09/2019). "Optical and thermal properties of PVB encapsulant polymer functionalized by down-shift technique with new synthetized quantum dots photovoltaic application", Proc. SPIE 11121, New Concepts in Solar and Thermal Radiation Conversion ll, p 111210H, DOI: 10.1117/12.2528722

Berger, I., Frank, A., Pinter, G., Arbeiter, F. J. (06/2019). "Accelerated Fracture Mechanics Material Ranking with Cyclic Cracked Round Bar CRB Test",  Extended Abstract: 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics, Vol. 2019, 6 pages

Gschwandl, M., Fuchs, P. F., Antretter, T., Pfost, M., Mitev, I., Qi, T., Krivec, T., Schingale, A., Decker, M. (06/2019). "A Sequential Finite Volume Method / Finite Element Analysis of a Power Electronic Semiconductor Chip", IEEE Xplore, 6 pages

Nagler, M., Thor, M., Peyrer, P., Schneiderbauer, G., Sendner, F. M., Wolfahrt, M., Hinterhölzl, R. (06/2019). "Analysis of the Macroscopic Behaviour of PMI Foam", Key Engineering Materials, Vol. 809, pp. 285-290, 2019

Frewein, M., Krivec, T., Tao, Q., Zuendel, J., Rosc, J., Gschwandl, M., Fuchs, P. F. (06/2019). "Package level warpage simulation of a fan out system in board module", IEEE Xplore, 7 pages, DOI:10.1109/EuroSimE.2019.8724518

Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G., Novak, P. (06/2019). "Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers", IEEE Xplore, 4 pages, DOI: 10.1109/EMAP.2018.8660763

Primetzhofer, A., Stadler, G., Pinter, G. (05/2019). "Transferability of FEMFAT -based life time assessment of sfr polymers to joint connections", Proceeding of FEMFAT Usermeeting

Fuchs, P. F., Mansouri, M., Ceglar, T., Beter, J., Schrittesser, B., Pettermann H. E. (04/2019). "Berechnung von Lastkopplungen in verstärkten Elastomeren", Schriftenreihe Kunststofftechnik Leoben, Vol. 9, pp 53 - 59, ISBN 978-3-9503248-9-1 

Stieger, S., Kerschbaumer, R. C., Berger-Weber, G. R., Friesenbichler, W. (04/2019). "Viskoelastische Charakterisierung, Modellierung und Strömungssimulation hochgefüllter Kautschukmischungen", Schriftenreihe Kunststofftechnik Leoben, Vol. 9, pp 78 - 88

Rendl, S., Gschwandl, M., Fuchs, P., Wiesbrock, F. (04/2019). "Mathematische Korrelation der thermischen Expansion von Epoxidharz/ZrW2O8 Verbundwerkstoffen", Tagungsband, Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik, Vol. 9, pp. 147 - 148

Marx, P., Morak, M., Gschwandl, M., Fuchs, P., Pfost, M., Wiesbrock, F. (04/2019). "Finite-Elemente-Analyse der Wärmeabfuhr in Gradienten-Kompositen", Tagungsband, Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik, Vol. 9, pp. 140 - 141

Windberger, M. S., Dimitriou, E., Wiesbrock, F. (04/2019). "Perkolationsschwelle der thermischen Leitfähigkeit in Epoxidharzen mit aromatischen Struktureinheiten", Tagungsband, Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik, Vol. 9, pp. 155 - 156

Gschwandl, M., Fuchs, P., Antretter, T., Pfost, M., Qi, T., Schingale, A. (04/2019). "Sequentieller Ansatz zur elektro-thermo-mechanischen Simulation in der Mikroelektronik", LKK Tagungsband (28. Leobener Kunststoffkolloquium), ISBN 978-3-9503248-9-1, Vol. 9, pp 38 - 43

Koenig, S.N., Wolfberger, A., Kraft, J., Minixhofer, R. (03/2019). "Reflow-Compatible Polymer-Based Diffuser" EMAP 2018 - 2018 20th International Conference on Electronic Materials and Packaging 5 March 2019, Article number 866087620th International Conference on Electronic Materials and Packaging, EMAP 2018; Clear Water Bay; Hong Kong; 17 December 2018 through 20 December 2018; Category number CFP18506-ART;Code 145942

Frank, A., Berger, I.J, Messiha, M., Pinter, G. (03/2019). "Influence of polyolefin cross-contamination on the slow crack growth resistance of polyethylene pipe grade", Proceedings ANTEC 2019, Vol. 2019, pp5

Messiha, M., Frank, A., Heimink, J., van Laak, H., Pinter, G. (03/2019). "Differences and similarities in fatigue failure mechanism of PA12 pipe grades compard to modern PE pipe grades", Proceedings: ANTEC 2019, Vol.2019, pp 8

2018

Truskaller, M., Forsthuber, B., Oreski, G., Grüll, G. (12/2018). "The Influence of Paint Colour and Cooling Pigments on Total Solar Reflectance and Surface Temperature of Wood Panels During Natural Weathering", Conference Proceeding WCC 2018, Vol. 2018, pp 14

Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Inter, G., Novak, P. (12/2018). "Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers", Tagungsband, EMAP 2018 Conference Proceedings, pp 4

Arfi, W., Khan, A., Moulai, F., Agroui, K., Baretta, C., Oreski, G., Jaunich, M. (12/2018). "Optical and thermal analysis of PVB encapsulant polymer functionalized with luminescent organic dyes", Proceedings of SPIE - The International Society for Optical Engineering, Art. Nr. 107590H, DOI: 10.1117/12.2318428

Weiss, K.-A., Kaaya, I., Barretta, C., Ascencio Vasquez, J., Nikola, H., Pitta Bauermann, L, Moser, D., Topic, M., van Iseghem, M. Oreski, G., Betts, T., Lagunas, A. R., Chiantore, P. (12/2018). "Training the next generation of PV reliability experts (Photovoltaic life time forecast and avaluation) - the Marie-Sklodowska Curie (MSCA) project Solar-Train", 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion, WCPEC 2018 - A Joint Conference of 45th IEEE PVSC, 28th PVSEC and 34th EU PVSEC, Art Nr. 8547663, pp 1356 - 1360, DOI: 10.1109/PVSC.2018.8547663

Haselmann, M., Gruber, D. P., Tabatabai, P. (12/2018). "Anomaly Detection using Deep Learning based Image Completion", Proceedings of the 17th IEEE International Conference on Machine Learning and Applications, pp 1237 - 1242, DOI: 10.1109/ICMLA.2018.00201

Schieppati, J., Schrittesser, B., Wondracek, A., Robin, S. Holzner, A., Pinter, G. (12/2018). "Impact of temperature on the fatigue and crack growth behavior of rubbers", Procedia Structural Integrity, Vol. 13 - 2018, pp 642 - 647, DOI: 10.1016/j.prostr.2018.12.106

Reinders, A., Moser, D., Sark, W. V., Oreski, G., Pearsall, N., Scognamiglio, A., Leloux, J. (11/2018). "Introducing ‘PEARL-PV’: Performance and Reliability of Photovoltaic Systems: Evaluations of Large-Scale Monitoring Data", 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion, WCPEC 2018 - A Joint Conference of 45th IEEE PVSC, 28th PVSEC and 34th EU PVSEC, Art. Nr. 8547966, pp 762 - 766, DOI: 10.1109/PVSC.2018.8547966

Yalagach, M., Fuchs, P. F., Mitev, I., Antretter, T., Feuchter, M., Wolfberger A., Qi, T. (11/2018). "Influence of environmental factors like temperature and humidity on MEMS packaging materials.", ESTC 2018 Proceedings, Art. Number 8546484

Taudt, C., Nelsen, B., Schlögl, S., Koch, E., Hartmann, P. (09/2018). "Fast crosslinking-characterization of waveguide-polymers on wafers by imaging low-coherence interferometry", Proceedings MDPI, p 1 - 5

Berger, I., Frank, A., Pinter, G., Nitsche, D., Petry, D. (09/2018). "Investigation of the Failure Behavior of Polyethylene Electrofusion Sockets", Proceedings PPXIX 2018,Vol. 2018,  pp 13

Frank, A., Berger, I.J., Messiha, M., Ek, C.G.; Schuler, N., Storheil, J.M., Mayrbäurl, E.,  Heeley, S., Krause, F., Niemöller, L., Gabriëls, P., Deshmukh, Y.S.; Arbeiter, F., Koch, T., Pinter, G. (09/2018). "Slow Crack Growth Resistance of Non-Vorgin Polymers", Proceedings PPXIX 2018, Vol 2018, pp 11

Messiha, M., Frank, A., Berger, I.J.; Heimink, J., van Laak, H., Arbeiter, F., Pinter, G. (09/2018). "Determination of the Slow Crack Growth Resistance of PA12 Pipe Grades", Proceedings PPXIX 2018, Vol. 2018, pp 10

Bredács, M., Frank, A., Bastero, A., Stolarz, A., Pinter, G. (09/2018). "Aging Mechanism of Polyethylene Pipe Material in Chlorine Dioxide and Hypochlorite Solution", Proceedings PPXIX 2018, Vol. 2018, pp 11

Hutař, P., Poduška, J., Dlhý, P., Frank, A., Kučera, J., Sadílek, J., Pinter, G., Náhlík, L. (09/2018). "Multilayer Polymer Pipes - Possible Utilization of Recycled Material", Proceedings PPXIX 2018, Vol 2018, pp 8

Pinter, G., Arbeiter, F., Wiener, J., Frank, A., Kolednik, O. (09/2018). "Biomimetic Design Concepts for the Pipe Architecture of Tomorrow", Proceedings PPXIX 2018, Vol 2018, pp 8

Dlhy, P., Poduska, J., Nahlik, L., Berer, M., Gosch, A., Pinter, G., Hutar, P. (09/2018). "Compression-Loaded Cracked Cylinder - Stress Intensity Factor Evaluation", Key Engineering Materials, Vol. 774, pp 331 - 336, DOI: 10.4028/www.scientific.net/KEM.774.331

Slavik, O., Hutar, P., Berer, M., Gosch, A., Arbeiter, F., Pinter, G., Nahlik, L. (09/2018). "Numerical Modelling of Cylindrical Specimen under Mixed-Mode Loading Conditions", Key Engineering Materials, Vol. 774, pp 325 - 330, DOI: doi:10.4028/www.scientific.net/KEM.774.325

Frank, A., Berger, I., Dreiling, G., Schuler, N., Storheil, J. M., Mayrbäurl, E., Smith, C., Krause, F., Niemöller, F., Deshmukh, Y., Gabriels, P., Koch, T., Arbeiter, F., Pinter, G. (06/2018). "Fracture mechanical characterization of non-virgin pipe materials", Proceedings ANTEC 1028

Berger, I., Frank, A., Pinter, G., Nitsche, D., Petry, D. (06/2018). "Comparison of real and simulated failure times based on the slow crack growth behavior", Proceedings ANTEC 2018

Bredacs, M., Frank, A., Bastero, A., Stolarz, A., Pinter, G. (06/2018). "Performance of PE pipe resins in chlorine dioxide containing aqueous solution", Proceedings ANTEC 2018, Vol. 2018

Laurikainen, P., Pötz, S., Jokinen, J., von Essen, M., Lindgren, M., Kallio, P., Kanerva, M., Oreski, G., Sarlin, E. (06/2018). "High Throuhput Mechanical Micro-Scale Characterization of Composites and the Utilization of the Results in Finite Element Analysis", ECCM 18, Conference Proceedings, Vol. 2018

Stadler, G., Primetzhofer, A., Pinter, G., Grün, F. (06/2018). "Short glass fibre reinforced polyamide under low cycle fatigue", Tagungsband ECCM 2018

Primetzhofer, A., Stadler, G., Schneider, C., Pinter, G., Grün, F. (06/2018). "Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide", Tagungsband, ECCM 2018

Khudiakova, A., Wolfahrt, M., Godec, D., Pinter, G. (06/2018). "Determination of the mode I strain energy release rate in carbo fibre reinforced composites by means of digital image correlation technique", Proceedings of ECCM 18 - 18th European Conference on Composite Materials

Röper, F., Wolfahrt, M., Kucher, G., Bubestinger, A., Pinter, G. (06/2018). "Influence of conditioning time and wet chemical surface treatment on aircraft repair", Proceedings of ECCM 18 - 18th European Conference on Composite Materials

Wolfahrt, M., Pilz, G., Lang, R. W. (06/2018). "Influence of curing degree on the mechanical performance of polymer matrix composites", Proceedings of ECCM18 - 18th European Conference on Composite Materials

Mühleisen, W., Neumaier, L., Wurzer, A., Omazic, A., Oreski, G., Hirschl, C. (06/2018). "Wissenschaftliche Begleitung einer PV Anlage auf einem Krankenhaus", Tagungsband PV Symosium 2018, Vol. 2018

Gschwandl, M., Kerschbaumer, R., Schrittesser, B., Fuchs, P. F., Stieger, S., Meinhart, L. (06/2018). "Thermal Conductivity Measurement of Industrial Rubber Compounds using Laser Flash Analysis: Applicability, Comparison and Evaluation", Tagungsband, Proceedings of the 34th International Conference of the Polymer Processing Society, Vol. 2018

Beter, J., Schrittesser, B. (06/2018). "Characterization of the adhesive bonding between hyperelastic material and surface treated fibers", Tagungsband, First International Conference on Mechanics of Advanced Materials and Structures, Vo. 2018

Marx, P., Eibel, A., Windberger, M. S., Jin, H., Tsekmes, I., Smit, J. J., Mühlbacher, I., Kern, W., Wiesbrock, F. (06/2018). "Verbesserte dielektrische Eigenschaften von poly(2-oxazolin)-basierenden Oberflächenbeschichtungen durch Zugabe von nanoskalierten Additiven", Tagunsband, 27. Leobener Kunststoff-Kollouqum, Print & Coat - Polymere in Druck- und Beschichtungstechnologien

Hofmann, R., Mühlbacher, I., Wiesbrock, F. (04/2018). "Maßgeschneiderte Oberflächen: Einstellung des isoelektrischen Punkts durch die Modifikation von esterfunktionalisierten Poly(2-oxazolin)en", Tagungsband, 27. Leobener Kunststoff-Kolloquium: Print & Coat - Polymere in Druck- und Beschichtungstechnologien

Giebler, M., Radl, S., Ast, M., Griesser, T., Kern, W., Schlögl, S. (04/2018), "Study of photocleavable epoxy-anhydride networks using photosensitive o-nitrobenzyl ester links", Tagungsband, 27. Leobener Kunststoff-Kolloquium: Print & Coat - Polymere in Druck- und Beschichtungstechnologien, Vol. 8, pp 257 - 258, ISBN: 3-9503248-8-4

Kaiser, S., Radl, S., Kern, W., Schlögl, S. (04/2018). "Reversible switching of the adhesion in photo- and thermoresponsive elastomers", Tagungsband, 27. Leobener Kunststoff-Kolloquium: Print & Coat - Polymere in Druck- und Beschichtungstechnologien, Vol. 8, pp 263 - 264, ISBN: 3-9503248-8-4

Maroh, B., Manhart, J., Schlögl, S. (04/2018). "Photochemical modification of natural rubber surfaces to tune tribological properties", Tagungsband, 27. Leobener Kunststoff-Kolloquium: Print & Coat - Polymere in Druck- und Beschichtungstechnologien, Vol. 8, pp 276 - 278, ISBN: 3-9503248-8-4

Schlögl, S., Radl, S. (04/2018). "Design von schaltbaren Polymeren - neue Konzepte für intelligente Beschichtungen", Tagungsband, 27. Leobener Kunststoff-Kolloquium: Print & Coat - Polymere in Druck- und Beschichtungstechnologien, Vol. 8, pp 125- 132, ISBN: 3-9503248-8-4

Radl, S., Schlögl, S., Griesser, T., Kern, W. (04/2018). "Reversible Cycloaddditionsreaktion von Anthracenen: Über einstellbare Materialeigenschaften, Selbstheilungsstrategien und Rissdetektion", Tagungsband, 27. Leobener Kunststoff-Kolloquium: Print & Coat - Polymere in Druck- und Beschichtungstechnologien, Vol. 8, pp 271 - 272, ISBN: 3-9503248-8-4

2017

Stiller, T., Hausberger, A., Wang, C., Pinter, G., Godor, I., Grün, F., Schwarz, T. (12/2017). "Untersuchung der lokalen Reibungsmechanismen von Polymer-Glaskontakten mittels in-situ Tribologie", Tagungsband, ÖTG 2017, Vol. 2017, pp 55 - 68

Primetzhofer, A., Stadler, G., PInter, G., Grün, F. (12/2017). "Lebensdauerberechnung Konzepte prozessabhängiger Materialien am Beispiel faserverstärkter Kunststoffe", Tagungsband DVM, Vol. 44, 16 p

Walluch, M., Uray, A.,  Holzer, C., Langecker, G. (12/2017). "Chemical Foam Extrusion: Impact of the Material Formulation on the Cell Morphology", Tagungsband Foams, pp 1

Mostafa, A., Pacher, G., Lucyshyn, T., Holzer C., Flachberger, H., Krischey, E., Fritz, B., Laske, S. (12/2017). "Influence of compounding technology on rheological, thermal and mechanical behavior of blast furnace slag filled polystyrene compounds", AIP Conference Proceedings, Vol. 1914, Dec 2017, Art. Nr. 15003

Riess, G., Berger, K., Kern, W. (12/2017). "Novel silicone thermoplastic elastomers with tailored permeation properties", AIP Conference Proceedings, Vol. 1914, Dec 2017, Art. Nr. 12003

Luef, K. P., Petit, C., Ottersböck, B., Oreski, G., Grassl, B., Reynaud, S., Wiesbrock, F. (09/2017). "Enzyme-Degradable Poly(2-Oxazoline)-Based Drug Depots", Danube Vlatva Sava Polymer Meeting: DVSPM 2017, Vol. 1, p OP-9

Wiesbrock, F., Fimberger, M., Tsekmes, I.-A., Kochetov, R., Smit, J. J. (09/2017). "High-Voltage Insulators Based on Poly(2-Oxazoline)s from Renewable Resources", Danube Vlatva Sava Polymer Meeting: DVSPM 2017, Vol. 1, p PO-29

Marx, P., Mühlbacher, I., Kern, W., Wiesbrock, F. (09/2017). "Surface Energy and Isoelectric Points of Eopxy/Anhydride Surfaces: Quantification of the Curing Degree", Danube Vlatva Sava Polymer Meeting: DVSPM 2017, Vol. 1, p PO-42

Wang, C., Hausberger, A., Pinter, G., Grün, F., Schwarz, T. (09/2017). "Fretting wear behavior of thermoplastic polyurethane (TPU) for mechanical seal application", WTC 2017 Tagungsband

Marx, P., Wanner, A. J., Zucong, Z., Jin, H., Tsekmes, I.-A., Smit, J. J., Kern, W., Wiesbrock, F. (09/2017). "Effect of Nanoparticle Functionalization and Air Humidity on the Dielectric Performance of Epoxy-Based Nanocomposites", Danube Vlatva Sava Polymer Meeting: DVSPM 2017, Vol. 1, p OP-25

Gschwandl, M., Fuchs, P. F., Mitev, I., Yalagach, M., Antretter, T., Qi, T., Schingale, A. (09/2017). "Modeling of Manufacturing Induced Residual Stresses of Viscoelastic Epoxy Mold Compound Encapsulations", 19th IEEE EPTC Proceedings

Hofmann, R., Mühlbacher, I., Wiesbrock, F. (09/2017). "Monitoring the Hydrolysis of Ester-Functionalized Poly(2-Oxazline)s via Zeta-Potential Measurements", Danube Vlatva Sava Polymer Meeting: DVSPM 2017, Vol. 1, p OP-63

Röper, F., Wolfahrt, M., Horejsi, K., Kucher, G., Bubestinger, A., Pinter, G. (09/2017). "Influence of the Surface Pretreatment on the Durability of Adhesively Bonded Composite Repairs", Konferenzbeitrag, 21st International Conference on Composite Materials (ICCM-21), 8 pages

Hofmann, R., Mostegel, F. H., Schön, E-M., Plappert, M., Behrendt, A., Stelzer, F., Wiesbrock, F. (09/2017). "Photoacoustic Detection as a Method for UV-Stability Analysis of Polysiloxane Surfaces", Danube Vlatva Sava Polymer Meeting: DVSPM 2017, Vol. 1, p PO-37

Gosar, Z., Gruber, D. P. (09/2017). "In-LINE quality inspection of freeform plastic high gloss surfaces aided by multi-axial robotic systems", ERK 2017 Proceeding, pp 445 - 448

Arnold, T., Meislitzer, s., Moldaschl, T., De Biasio, M., Neumaier, L., Leitner, R., Ottersböck, B., Oreski, G., Kraft, M., Hirschl, C. (09/2017). "Detection and identification of foreign bodies in polymer parts for use in semiconductor manufacturing", Proceedings Volume 10209, Image Sensing Technologies: Materials, Devices, Systems, and Applications IV; 102090U (2017), Vol. 2017, DOI: 10.1117/12.2262617

Ramoa, B., Berer, M., Schwaiger, M., Pinter, G. (06/2017). "Effect of cyclic fatigue on the fracture toughness of Polyoxymethylene", Journal of Physics Conference Series, Vol. 843, pp 10, DOI: 10.1088/1742-6596/843/1/012052

Bredács, M., Frank, A., Bastero, A., Pinter, G. (06/2017). "Accelerated aging of polyethylene pipe grades in chlorine dioxide and hypochlorite solution", in proc: Annual Technical Conference - ANTEC, Vol. 2017, pp 8

Haselmann, M., Gruber, D. P. (04/2017). "Deep Learning for Barrier Defect Detection on Coated Cardboard", Messtechnik und Sonsorik, Tagungsband, pp 88 - 91

Hofmann, R., Mostegel, F. H., Schön, E.-M., Plappert, M., Behrendt, A., Stelzer, F., Wiesbrock, F. (04/2017). "Untersuchung der UV-Stabilität von Polysiloxan-Oberflächen mittels photoakustischer Detektion", 26. Leobener Kunststoffkolloquium: Innovative Spritzgießtechnologie -Trends und aktuelle Entwicklungen, pp 253 - 254

Friesenbichler, W., Kerschbaumer, R. C. (04/2017). "Das Kautschukspritzgießen - Maschinen-, Prozess- und Werkzeugtechnik", Schriftenreihe Kunststofftechnik Leoben, ISBN 978-3-9503248-6-0, Eigenverlag, Vol. 7, pp 107 - 128

Kerschbaumer, R. C., Lechner, B., Graninger, G., Friesenbichler, W. (04/2017). "Strömungs- und Temperaturverhältnisse in der Kautschuk Plastifiziereinheit", Schriftenreihe Kunststofftechnik Leoben, ISBN 978-3-9503248-0, Eigenverlag, pp 155 - 164

Kerschbaumer, R. C., Lechner, B., Friesenbichler, W. (04/2017). "Moffatt-Eddies: Existing in Rubber Processing", Schriftenreihe Kunststofftechik Leoben, ISBN 978-3-9503248-6-0, Eigenverlag, pp 27 - 28

Kerschbaumer, R. C., Lechner, B., Tscharnuter, D., Wanner, A., Friesenbichler, W. (04/2017). "Determination of Thermal Conductivity of an Industrial Rubber Compound: Challenges, Problems and Comparison of Different Test Methods", Book of Abstracts, ISBN 978-80-906662-0-7, p 74

Kerschbaumer, R. C., Lechner, B., Tscharnuter, D., Wanner, A., Friesenbichler, W. (04/2017). "Change of Thermal Conductivity within an Injection Molded Rubber Part due to Local Differences in Filler Condition", Book of Abstracs, ISBN 978-80-906662-0-7, p 169

Haselmann, M., Gruber, D. P. (04/2017). "Machine Learning im Bereich der automatisierten Qualitätsinspektion von Dekormustern", Schriftenreihe Kunsstofftechnik Leoben, Vol. 7, pp 177 - 180

Gruber, D. P., Haselmann, M., Friesenbichler, W. (04/2017). "Die Physik der Oberfläche - Oberflächeneigenschaften und Haptik", Schriftenreihe Kunststofftechnik Leoben, Vol. 7, 165 - 175

Haselmann, M., Gruber, D. P. (04/2017). "Virtual Golden Samples - Innovative Defekterkennung bei Automotive Interiorteilen", Schriftenreihe Kunststofftechnik Leoben, Vol. 7, pp 259 - 260

2016

Margossian, A., Hörmann, P., Zemliana, K., Bel, S., Avila Gray, L., Hinterhölzl, R. (12/2016). "Shear characterisation of unidirectional thermoset pre-impregnated composites using a rheometre", 19th Journées Nationales sur les Composites (JNC), pp 1 - 10

Haselmann, M., Gruber, D. P. (09/2016). "Anomaly detection on arbitrarily distorted 2D patterns by computation of a virtual golden sample", IEEE Proceeding, 5 pages

Bandl, C., Schlögl, S., Feldbacher, S., Kern, W. (09/2016). "Investigation of temporary binding pressure sensitive adhesives comprising external triggered release", Tagungsband, Book of ABstracts der EURADH 2016, pp 360 - 363

Frank, A., Berger, I. J., Arbeiter, F., Hutar, P., Pinter, G. (09/2016). "Lifetime Prediction of PE100 and PE100-RC Pipes based on Slow Crack Growth Resistance", Proceedings Plastic Pipes Conference XVIII, Vol. 2016, 11 pages

Hutar, P., Poduska, J., Kucera, J., Nezbedova, E., Frank, A., Sadilek, J., Pinter, G. (09/2016). "Residual stress distribution in the extruded polyolefin pipes", Proceedings Plastic Pipes Conference XVIII, Vol. 2016, 8 pages

Bredacs, M., Redhead, A., Frank, A., Bastero, A., Pinter, G. (09/2016). "Implementation of a New Chlorine Dioxide Device for Accelerated Aging of Polyolefin Pipe Materials", Proc. Plastic Pipes Conference XVIII, Vol. 2016, 10 pages

Bastero, A., Bredacs, M., Frank, A. (09/2016). "Effect of different chlorinated media to PE pipe materials", Proc. Plastic Pipes Conference XVIII, Vol. 2016, 7 pages

Pinter, G., Arbeiter, F., Frank, A. (09/2016). "Fast comparison of different polymeric pipe materials: Extending the use of the cycliec CRB test (ISO 18489)", Plastic Pipes Confrence Association, Vol. 2016, 10 pages

Walluch, M., Uray, A., Roitner, J., Holzer, C., Langecker, G. (09/2016). "Influence of COC on the foaming behavior and the rheological properties of polypropylene", Konferenzproceeding, FOAMS 2016, 8 pages

Friesenbichler, W., Fasching, M., Berger, G. R. (09/2016). "Simulation of Rubber Injection Molding - Challenges and Limitations", Proceedings of PMI 2016

Tscharnuter, D., Truszkiewicz, E., Pinter, G. (08/2016). "An Adaptable Semi-Numerical Hyperelastic Model for the Simulation of High-Pressure Forming", Proceedings ICCM 2016: International Conference on Computational Mechanics, p 1114

Pacher, G. A., Hutterer, T., Berger, G., Friesenbichler, W. (07/2016). "Influence of Processing Conditions and Filler Type and on the Crystallinity of PLA Compounds", Proceedings of the 32nd International Conference oft the Polymer Processing Society (PPS-32), 5 pages

Walluch, M., Uray, A., Holzer, C., (07/2016). "Physical foam extrusion of polyolefin/cycloolefin copolymer blends", Conference Proceedings, PPS 2016

Primetzhofer, A., Mösenbacher, A., Pinter, G. (06/2016). "Fatigue Strength of a Multiaxial Loaded Short Glass Fibre Reinforced Polyamide", ECCM17 Programme and book of abstracts, 8 pages

Pinter, G., Maier, J., Wolfahrt, M., Schuecker, C. (06/2016). "Suitability of stiffness and strength based concepts for the fatigue - life prediction of composites", Conference Proceedings ECCM17, ISBN 978-3-00-053387-7

Wolfahrt, M., Rausch-Schott, O., Sinic, J., Pichler, S., Wuzella, G. (06/2016). "Effect of moisture absorption on selected mechanical properties of natural fiber composites based on woven flax fibers and polypropylene", Conference Proceedings, ECCM17, München, 7 pages, ISBN 978-3-00-053387-7

Röper, F., Wolfahrt, M., Kucher, G., Bubestinger, A., Pinter, G. (06/2016). "Effect of repair design and surface treatment on adhesively bonded composite repairs", Conference proceedings, ECCM17, München, 7 pages

Mihaljevic, A., Oreski, G., Pinter, G. (06/2016). "Influence of backsheet type on formation of acetic acid in PV modules", Conference Proceedings PVSEC 2016, tba

Wiesbrock, F. (06/2016). "Polymerbasierte Kontaktbiozide als Additive zur Oberflächenfunktionalisierung", Polymerbasierte Kontaktbiozide als Additive zur Oberflächenfunktionalisierung, Vol. 3, pp 235 - 266

Luef, K.P., Fimberger, M., Wiesbrock, F. (04/2016). "Pseudo-Polyamide zur antimikrobiellen Ausrüstung von Polyolefin-Oberflächen", Tagungsband, Schriftenreihe Kunststofftechnik Leoben Band 06: 25. Leobener Kunststoffkolloquium, pp 197 - 198

Kerschbaumer, R., Lechner, B., Graninger, G., Haselmann, M., Friesenbichler, W. (04/2016). "A First Approach to Visualize the Flow Behaviour in the Screw Channel for a CSM - Rubber Compound

Zhang, Z., Müller, C., Moser, A., Feuchter, M, Mühlbacher, I., Stelzer, F., Muhr, H.M., Schichler, U., Schwarz, R., Pukel, G., Wiesbrock, F. (04/2016). "Epoxidharze als Adhäsive im Transformatorenbau", Schriftenreihe Kunststofftechink Leoben: 25. Leobener Kunststoffkolloquium, Vol. 6, pp 207 - 208

Plesa, I., Anaca, O., Wiesbrock, F., Muhr, M., Schichler, U., Sumereder, C. (03/2016). "Test Setup and Methods for Electrical Characterization of Semidonducting Powders", CIGRE´s on-line library and bookstore, ISH2015_467, 4 pages

2015

Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Kern, W. (12/2015). "Flexible Epoxy Based Composites with Enhanced Delamination Resistance", Fiber Reinofrced Plastics (in press)

Manhart, J., Lenko, D., Mühlbacher, I., Hausberger, A., Schaller, R., Holzner, A., Kern, W., Schlögl, S. (12/2015). "UV-induced Modulation of Tribological Characteristics: Elastomeric Materials Featuring Controlled Anisotropic Friction Proberties", Proceedings of PPS-2015 (in press)

Walluch, M., Uray, A., Laske, S., Holzer, C., Langecker, G. (9/2015). "Foam Morphology of Polypropylene/Cycloolefin Copolymer blends", Konferenzproceeding, Foams 2015

Luef, K. P., Petit, C., Grassl, B., Reynaud, S., Wiesbrock, F. (9/2015). "Photoresists of 2-Oxazoline Copolymers from Renewable Resources", Regional Conference Polymer Processing Society 2015 Graz, p 38

Plesa, I., Schlögl, S., Radl, S., Wiesbrock, F., Schichler, U. (9/2015). "Preparation and Characterization of Flexible Semiconducting Nanocomposites", Regional Conference Polymer Processing Society 2015 Graz, p 24

Plesa, I., Octavian, A., Wiesbrock, F., Muhr, H. M., Schichler, U. Sumereder, C. (9/2015). "Test Setup and Methods for Electrical Characterization of Semiconducting Powders", Official electronic ISH conference proceedings, pp 1 - 4

Friesenbichler, W., Perko, L., Fasching, M. (9/2015). "Slit-die Rheometry and Its Potential in Polymer Melt Rheology", Proceedings of PPS-31, p 299

Fasching, M., Friesenbichler, W., Berger, G. R. (9/2015). "Virtual Modelling of the Rubber Injection Molding Process including Verification in Industrial Scale Experiments", Proceedings of DKT 2015, 3 pages

Friesenbichler, W., Perko, L., Fasching, M. (9/2015). "Potential for Cure Time Reduction in Rubber Injection Molding and its Analytical Prediction", Proceedings of DKT 2015, 4 pages

Fasching, M., Friesenbichler, W., Pacher, G., Berger, G.R. (9/2015). "Advanced Mold Concepts to Improve Part Quality and Productivity in Rubber Injection Molding", Book of Abstracts of PPS- Graz, p 49

Ayalur-Karunakaran, S., Manhart, J., Fasching, M., Schlögl, S. (9/2015). "Structural Analysis of Elastomer And Polymer Materials With Low Field Time Domain Solid State NMR", Book of Abstracts of PPS-Graz, p 100

Fasching, M., Friesenbichler, W., Berger, G. R. (9/2015). "Change of Processing Behavior of Rubbers in Injection Molding caused by Material Storage", Book of Abstracts of PPS-Graz, p 103

Klein, A., Blees, E., Resch, K. (9/2015). "Evaluation of mechanical Recyclability of technical Biopolymers", Book of Abstracts of the 8th International Symposium on Feedstock Recycling o Polymeric Materials, pp 47 - 48

Klein, A., Blees, E., Resch, K. (9/2015). "Mechanical Recycling of technical Biopolymers - Possibilites and LImits", Regional Conference: PPS Graz 2015, Book of Abstracs, p 223

Pacher, G., Berger, G., Friesenbichler, W., Gruber, D. (9/2015). "Influence of Rapid Heat Cycle Molding and Filler Type on Part Warpage of PP-based compounds", PPS Graz, 2015, Book of Abstracts, p 50

Primetzhofer, A., Mösenbacher, A., Pinter, G. (9/2015). "Influence of mean stress and weld lines on the fatigue behaviour of short fibre reinforced polyamide", ICCM 20 Programme and book of abstracts, 10 pages

Primetzofer, A., Mösenbacher, A., Haslinger, T., Pinter, G. (9/2015). "Concept of Fatigue Design Methodology for short fibre reinforced Polymers considering Environmental Conditions", PPS Book of Abstracts, 5 pages

Pinter, G., Arbeiter, F., Berer, M., Frank, A., Schrittesser, B. (9/2015). "The Cyclic CRB Test - A Quick Test for Assessing the Long Term Fracture Behavior of Polymers", Tagungsband PPS 2015, p 104

Luef, K. P., Fimberger, M., Fischer, R., Stelzer, F., Wiesbrock, F. (6/2015). "Selectivity of the initiation of the cationic ring-opening polymerization of 2-oxazolines", European Polymer Congress - Book of Abstracts, Vol 2015, p 63

Luef, K. P., Petit, C., Grassl, B., Reynaud, S., Wiesbrock, F. (6/2015). "Click Chemistry-Mediated Synthesis of Novel Drug Depots Based on Copoly(ester-2-oxazoine)s and Their Characterization", European Polymer Congress - Book of Abstracts, Vol 2015, p 182

Luef, K. P., Petit, C., Grassl, B., Reynaud, S., Wiesbrock, F. (6/2015). "Copoly(ester-2-oxazoline)s as Novel Drug Depots", Danube Vltava Sava Polymer Meeting - DVSPM 2015, Vol 2015, p 23

Zhang, Z. Moser, A., Mühlbacher, I., Stelzer, F., ukel, G., Schwarz, R., Wiesbrock, F. (6/2015). "Model Study of BADGE-Based Epoxy Resin Adhesives", Danube Vltava Sava Polymer Meeting - DVSPM 2015, Vol 2015, p 60

Bomze, D., Knaack, P., Kern, W., Liska, R. (6/2015). "Cationic Frontal Polymerization for the Production of Electrical Insulating Materials", Danube Vltava Sava Polymer Meeting - DVSPM 2015,, Vol 2015, p 62

Plesa, I., Schlögl, S., Radl, S., Mühlbacher, I., Schichler, U. (6/2015). "The Influence of Surface Modification on the Electrical Properties of Silicon Carbide Flakes", 9th International Symposium on Advanced Topics in Electrical Engineering (ATEE), 2015, Vol 2015, pp 460 - 463

Haselmann, M., Gruber, D. P., Hinterberger, R. (6/2015). "Defect Detection on Transparent Injection Molding Parts with Scattering Substructures", PSS-31 Proceedings, p 345

Fasching, M., Berger, G. R., Friesenbichler, W. (1/2015). "Inline Detection of Material Storage Effects on Processing Behavior of Rubber Compounds", Proceedings of Antec2015, 5 pages

Walluch, M., Uray, A., Geissler, B., Laske, S., Holzer, C., Langecker, G. (1/2015). "The influence of rheological properties of the material formulation on the cell size and cell density of physically foamed Polyethylene", Konferenzproceeding, Antec 2015

Brunbauer, J., Wolfahrt, M., Pinter, G. (1/2015), "Erweiterung der klassischen Laminattheorie zur Berechnung ermüdungsinduzierter Steifigkeitsabfälle in CFK", Advanced Material Research, Vol 4, pp 53 - 57

2014

Kern, W., Muhr, N., Riess, G., Schauberger, J. (12/2014). "Härtung von Composit-Werkstoffen durch strahlungsbasierte Prozesse", Schriftenreihe Kunststofftechnik Leoben, pp 115 - 123

Hausberger, A., Godor, I., Grün, F., PInter, G., Schwarz, T. (12/2014). "Optimierung tribologischer Testmethoden für die Dichtungstechnik", Tribologie in Industrie und Forschung, pp 17 - 23

Brunbauer,J., Wolfahrt, M., Pinter, G. (12/2014). "Erweiterung der klassischen Laminattheorie zur Berechnung ermüdungsinduzierter Steifigkeitsabfälle in CFK", Schriftenreihe Kunststofftechnik Leoben Band 4: 23. Leobener Kunststoff-Kolloquium, pp 53 - 57

Hirth, C., Wolfahrt, M., Körber, H., Hinterdorfer, S. (12/2014). "Dehnratenabhängige Werkstoffcharakterisierung und -modellierung faserverstärkter Kunststoffe", Schriftenreihe Kunststofftechnik Leoben Band 04, pp 59 - 68

Knapp, G., Leyrer, M., Oreski, G., Pinter, G. (12/2014). "Characterization of the damping behavior of thin films with dynamic mechanic analysis in bending mode", Proceedings of ASME 2014 Internatinal Mechanical Engineering Congress & Exposition

Wolfahrt, M., Rausch-Schott, O., Sinic, J., Wuzella, G., Pichler, S., Lammer, H. (11/2014). "fax2drive:flachsfaserverstärkte Organobleche", 23. Leobener Kunststoffkolloqium, Eigenverlag, pp 125 - 133

Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W., Schlögl, S. (9/2014). "Structured and Functional Elastomer-Based Composites with Tailored Friction Properties", 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22), 2 p

Schlögl, S., Reischl, M., Ribitsch, V., Kern, W. (9/2014). "UV assisted microcellular foaming - A new approach towards the formation of 3 D structures in offset printing techniques", 3rd European Symposium of Photopolymer Science, OP-50

Manhart, J., Fleischmann, D. D., Ayalur-Karunakaran, S., Griesser, T., Oesterreicher, A., Kern, W., Schlögl, S. (9/2014). "Photoreversible Crosslinking of Elastomer Materials", 3rd European Symposium of Photopolymer Science, OP-60

Pacher, G., Berger, G., Gruber, D., Rescher, M., Friesenbichler, W. (6/2015). "Sink Mark Shape Depending on Holding Pressure and Rapid Heat Cycle Molding - Mathematical Approximation and Key Parameters", SPE ANTEC 2014 Converence, Las Vegas, pp 1716 - 1720

Mattausch, H., Laske, S., Hohenwarter, D., Holzer, C. (6/2015). "Influence of mineral fillers on the flame retardancy of expandable graphite/polypropylene materials", Proceedings of Antec 2014, Vol. Antec 2014

Geissler, B., Laske, S., Uray, A., Holzer, C., Langecker, G. (6/2014). "Influence of cellulose fiber on the foaming behavior of a polypropylene copolymer", Proceedings of Antec 2014, Vol. Antec 2014

Geissler, B., Schuschnigg, St., Laske, St., Macher, J., Holzer, C., Langecker, G. (6/2014). "Influence of the flow channel geometry on the degassing pressure in foam extrusion", ANTEC 2014 - Proceedings of the Technical Converence & Exhibition 6, p 5

Gager, J., Pettermann, H. E. (6/2014). "Numerical predictions of the nonlinear behavior for Bi-axial braidings", 16th European Conference on Composite Materials, ECCM 2014

Fasching, M., Friesenbichler, W., Berger, G. R. (6/2014). "Validation of rubber injection molding simulation by correlation of simulated curing degree to measureable part properties", 30th Annual Conference of Polymer Processing Society

Berger, G. R., Friesenbichler, W., Gruber, D., Macher, J., Pacher, G. (6/2014). "Rapid Heat Cycle Molding, Surface Topography and Visual Appearance of Injection Molded Parts", SPE ANTEC 2014 Converence, Las Vegas, pp 1700 - 1705

Pacher, G. A., Berger, G. R., Friesenbichler, W., Gruber, D. P., Macher, J. (6/2014). "In-mold sensor concept to calculate process-specific rheological properties", AIP Conference Proceedings, Vol. 1593, pp 170 - 182

Fellner, K., Fuchs, P. F., Antretter, T., Pinter, G., Schöngrundner, R. (6/2015). "Determination of cyclic mechanical properties of thin copper layers for PCB applications", 2014 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimeE 2014, Article number 6813788

Kisslinger, T., Bruckmoser, K., Lucyshyn, T. Langecker, G. R., Resch, K., Holzer, C. (2014). "Interface conditions of two-shot molded parts", AIP Conference Proceedings, Vol. 1593, 2014, pp 170 - 174

Fuchs, P. F., Pinter, G., Krivec, T. (4/2014). "Design independent lifetime assessment method for PCBs under low cycle fatigue loading conditions", 2014 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2014, Article number 6813787

Berger, G. R., Pacher, G. A., Pichler, A., Friesenbichler, W., Gruber, D. P. (2014). "Influence of mold surface temperature on polymer part warpage in rapid heat cycle molding", AIP Confrence Proceedings, Vol. 1593, pp 189 - 194

2013

Berger, G., R., Friesenbichler, W., Teichert, C., Langecker, G., R., Lugger, M. (12/2013). "Reibwerte und Entformungskräfte im konventionellen Spritzguss", in. Proc. "22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie, pp. 75-89.

Berger, G.R., Gruber, D.P., Pacher, G.A., Friesenbichler, W. (12/2013). "An overview on research work in the fields of rapid heat cycle molding, surface topography and visual appearance of injection moldel parts", in Proc. "Advances in Plastics Technology", pp. 1-5.

Berger, G.R., Pacher, G.A., Pichler, A., Friesenbichler, W., Gruber, D.P. (12/2013). "Influence of Mold Surface Temperature in Rapid Heat Cycle Molding on Polymer Part Warpage", in Proc. "Advances in Plastics Technology", pp. 1-5.

Fasching, M., Berger, G.R., Friesenbichler, W. (12/2013). "Influence of material condition on processing of rubber compounds and ist representation in simulation", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 75-77.

Feldbacher, S., Kern, W., Woods, R., Satzinger, V., Langer, G., (12/2013). "Long-term stable flexible polymeric optical waveguides", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 202-204.

Fimberger, M., Schenk, V., Wiesbrock, F. (12/2013). "UV-induced 2.5D-patterning of poly[2-(2´-norbornyl)-2-oxazoline]", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 51-53, 245-246.

Geissler, B., Holzer, C., Uray, A., M., Laske, S., Langecker, G.R. (12/2013). "Improving the foamability of a styrene butadiene copolymer", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 110-112.

Gruber D.P., Berger, G.R., Friesenbichler, W. (12/2013). "New ways for the characterization of appearance properties of plastic products and components close to human vision", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 11.

Kelly, A.M., Hecke, A., Wirnsberger, B., Wiesbrock, F. (12/2013). "Poly(2-oxazoline)-hydrogels as matrices for stimuli-triggered substance release", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 188-189.

Knapp, G., Oreski, G., Pinter, G. (12/2013). "Characterisation of the damping behavior of thin multilayer films", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 46-48.

Knausz, M., Oreski, G., Guttmann, P. (12/2013). "Investigation in the thermal expansion behavior of PV module encapsulation materials", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 44-46.

Kramer, R., Yue, L., Puchleitner, R., Riess, G., Kern, W. (12/2013). "Advanced UV-curable resins for adhesion application", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 250-252.

Leimgruber, S., Kern, W., Hochenauer, R., Melmer, M., Holzner, A., Trimmel, G. (12/2013). "Untersuchung der Gummi-Metall Adhäsionsschicht durch die Olefin-Metathese-Methode", in. Proc. "22. Leobener Kunststoff-Koloquium: Oberflächen und Grenzflächen in der Polymertechnologie, pp. 221-227.

Lenko, D., Schlögl, S., Bichler, S., Ladstätter, W., Ramsauer, F., Kern, W. (12/2013). "Oberflächenfunktionalisierte Elastomere in Epoxidharzverbunden", in. Proc. "22.Leobener Kunststoff-Kolloquium", pp. 175 - 184.

Lenko, D., Schlögl, S., Kern, W., Schaller, R., Holzner, A. (12/2013). "Photochemical cross-linking of XNBR-latex using the thiol-ene reaction – a new approach for the manufacture of low allergenic latex gloves", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 130-132.

Macher, J., Gruber, D.P., Berger, G., Friesenbichler, W. (12/2013). "Application of deflectometry for surface inspection of high-glossy injection-molded facing parts", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 93-95.

Manhart, J., Schlögl, S., Kern, W., Schaller, R., Holzner, A., Schauberger, J. (12/2013). "Photochemical cross-linking of polymer materials via functional inorganic particles", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 118-120.

Nothdurft, P., Feldbacher, S., Kern, W. (12/2013). "Anchoring of alkylsilanes and alkylphosphonic derivates on copper surfaces", in Proc. "Austrian - Slovenian Polymer Meeting

2013", pp. 161-162.Oreski, G., Pinter, G. (12/2013). "Accelerated weathering of multi-layer films – effect of specimen preparation", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 40-42.

Pacher, G.A., Berger, G.R., Friesenbichler, W., Gruber, D.P. (12/2013). "Die Wirkung dynamischer Werkzeugtemperierung auf die Oberflächenqualität von Kunststoffteilen", in Proc. "22. Leobener Kunststoff-Kolloquium", pp. 101-110.

Radl, S.V., Hirschman, B., Grießer, T., Kern, W. (12/2013). "Reversible crosslinking of anthracene functionalized polynorbornenes", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 149-151.

Schlögl, S., Lenko, D., Manhart, J., Kramer, R., Schaller, R., Holzner, A., Kern, W. (12/2013). "Reaktive Funktionalisierung von Elastomeroberflächen", in. Proc. "22.Leobener Kunststoff-Kolloquium", pp. 24-34.

Schlögl, S., Kern, W., Reischl, M., Ribitsch, V. (12/2013). "Microcellular foaming with UV light – new strategies for the formation of 3D structures in offset printing techniques", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 48-50.

Weber, A., Resch, K. (12/2013). "Improvement of light shielding performence of thermotropic glazings by adaption of material composition and curing parameters", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 132-133.

Wiesbrock, F., Kelly, A. Kaltenhauser, V., Mühlbacher, I. (12/2013). "Poly(ethylene imine)-derived contact biocides: Fabrication of antimicrobially active surfaces", in Proc. "Austrian - Slovenian Polymer Meeting 2013", pp. 31-33.

Wiesbrock, F., Kelly, A., M., Stelzer, F. (12/2013). "Kunststoff-Oberflächen mit antibakterieller Wirkung", in. Proc. "22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie", pp. 47-57.

Frank, A., Dragaun, H., Pinter, G. (11/2013). "Beschleunigte Beurteilung des Risswachstums in Polyethylen Der Zyklische Cracked Round Bar (CRB) Test", in. Proc. "Nutzungsdauer von Rohren und Geokunststoffen aus Polyolefinen", pp. 1-22.

Hausberger, A., Godor, I., Grün, F., Pinter, G., Schwarz, T. (11/2013). "Vom tribologischen Modellversuch zur Bauteilprüfung", in. Proc. "22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie", pp. 150-157.

Feldbacher, S., Woods, R., Satzinger, V., Langer, G., Kern, W. (10/2013). "Long term stable flexible polymeric optical waveguides", in Proc. "Austrian-Slovenian Polymer Meeting", ISBN 978-961-269-992-5, e-book, pp. 202-204.

Hirner, M., Langecker, G. R. (10/2013). "EXINMOLD: Application of a Knowledge Management System for the Plastics Industry", In Proc. "APT 13 - Advances in Plastics Technology", pp. 1-8.

Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G.R., Holzer, C. (10/2013). "Grenzflächenphänomene im Mehrkomponenten-Spritzguss", In Proc. "22. Leobener Kunststoff-Kolloquium, Oberflächen und Grenzflächen in der Polymertechnologie", pp. 58.74.

Nothdurft, P., Feldbacher, S., Kern, W. (10/2013). "Anchoring of alkylsilanes and alkylphosphonic derivates on copper surfaces", in Proc. "Austrian-Slovenian Polymer Meeting", ISBN 978-961-269-992-5, e-book, pp. 161-162.

Nothdurft, P., Feldbacher, S., Kern, W. (10/2013). "Modification of copper surfaces with alkylsilanes and alkylphosphonic derivates", in Proc. "European Polymer Congress epf 2013", Book of Abstracts, P7-68.

Rossegger, E., Ritter, M., Stelzer, F., Wiesbrock, F. (10/2013). "Helical Forming Poly(2-Azanorbornene)s", in Proc. "European Polymer Congress epf 2013", Book of Abstracts, OC2-98.

Frank, A., Pinter, G., Haager, M., Balika, W., Lang, R.W. (9/2013). "The Cyclic CRB Test on its Way to Standardization", in Proc. "Schriftenreihe Advances in Polymer Science and Technology - APST 3", pp. 51.

Gager, J., Meindlhumer, M., Schwab, M., Pettermann, H.E. (9/2013). "Numerically Predicted Damage and Failure Envelopes of Composites Featuring Nonlinear Material Behavior", in Proc. "19th International Conference on Composite Materials", pp. 1-9.

Geissler, B., Macher, J., Laske, S., Holzer, C., Langecker, G.R. (9/2013). "Influence of the shear rate and the nucleating agent on the degassing pressure in foam extrusion", in Proc. "Foams 2013", pp. 1-4 (Paper 17).

Hirschmann, B., Oreski, G. (9/2013). "Influence of ageing-temperature and relative humidity on the ageing behaviour of polyethylene terephthalate", in Proc. "Natural and Artificial Ageing of Polymers", pp. 357-363.

Knapp, G., Oreski, G., Pinter, G. (9/2013). "Effect of processing conditions on the fatigue behaviour of thin films in structural applications", in Proc. "Polymer Processing Society 29th Annual Meeting", pp. 1-3.

Oreski, G., Pinter, G. (9/2013). "Accelerated weathering of mulit-layer films", in Proc. "Natural and Artificial Ageing of Polymers", pp. 129-135.

Oreski, G., Pinter, G. (9/2013). "Aging characterization of multi-layer films used as photovoltaic module backsheets", in Proc. "PVSEC Conference".

Pettermann, H.E., Rama Lista, E., Reisinger, A., Gager, J. (9/2013). "Delamination Induced Ply Damage - Nonlinear Simulations Accounting for Degradation of Layer and Interfaces Properties Simultaneously", in Proc. "Composites 2013 (IV ECCOMAS Thematic Conference on the Mechanical Response of Composites)", pp. 1-9.

Rossegger, E., Stelzer, F., Wiesbrock, F. (9/2013). "Structural Properties of Poly(2-Azanorbornene)s", in "Advances in Polymer Science and Technology", pp. 26-26.

Voronko, Y., Eder, G.C., Chernev, B.S., Knausz, M., Oreski, G., Koch, T., Berger, K. (9/2013). "Analytical evaluation of the ageing induced changes of the adhesive within photovoltaic backsheets", in Proc. "PVSEC Conference".

Weber, A., Gruber, D.P., Resch, K. (9/2013). "Thermotropic Overheating Protection Glazings", in Proc. "Schriftenreihe Advances in Polymer Science and Technology 3: Proceedings of a Conference on Polymer Science", pp. 25.

Geissler, B., Holzer, C., Feuchter, M., Laske, S. (8/2013). "Strategies to improve the mechanical properties of high density pla foam", in Proc. "Biofoam 2013", pp. 1-4.

Berger, G.R., Pacher, G.A., Pichler, A., Friesenbichler, W., Gruber, D.P. (7/2013). "Influence of Mold Surface Temperature in Rapid Heat Cycle Molding on Polymer Part Warpage", in Proc. "Polymer Processing Society 29th Annual Meeting", pp. 1-5.

Fasching, M., Berger, G.R., Friesenbichler, W. (7/2013). "Systematic Virtual Optimization of the Rubber Injection Molding Process including practical Verification", in Proc. "Polymer Processing Society 29th Annual Meeting", pp. 1-5.

Geissler, B., Mostafa, H., Uray, A., Laske, S., Holzer, C., Langecker, G. (7/2013). "Influence of Chain Extender on the Foaming Behavior and on the Mechanical Properties of Physically Foamed PLA", in Proc. "29th Annual Meeting Polymer Processing Society", pp. S07-559.

Geissler, B., Uray, A., Laske, S., Langecker, G.R., Holzer, C. (7/2013). "Influence of different fillers on the processing behavior and mechanical properties of physically foamed polyethylene", in Proc. "29th Annual Meeting Polymer Processing Society", pp. S08-554.

Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G.R., Holzer, C. (7/2013). "Interface Conditions of Two-Shot Molded Parts", in Proc. "Polymer Processing Society 29th Annual Meeting, PPS-29", pp. 1-5.

Pacher, G.A., Berger, G.R., Friesenbichler, W., Gruber, D.P., Macher, J. (7/2013). "In-Mold Sensor Concept to calculate process-specific Rheological Properties", in Proc. "Polymer Processing Society 29th Annual Meeting", pp. 1-5.

Fellner, K., Fuchs, P.F., Pinter, G., Antretter, T. (6/2013). "Characterization of thin copper layers under cyclic loads", in Proc. "Youth Symposium on Experimental Solids Mechanics", pp. 1-6.

Pacher, G., Berger, G.R., Friesenbichler, W. (6/2013). "Multi-Functional Injection Mold for Examining the Influence of Rapid Heat Cycle Molding on Polymer Morphology", in Proc. "3. Tagung Innovation Messtechnik", pp. 25-30.

Pettermann, H.E., Gager, J., Meindlhumer, M., Schwab, M. (6/2013). "Damage evolution predictions in large laminated composite structures", in Proc. "3rd International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2011)", pp. 148.

Pacher, G., Berger, G.R., Friesenbichler, W. (5/2013). "Performance Comparison of selected Rapid Heat Cycle Molding Systems and Models for predicting Heating and Cooling Behavior", in Proc. "ANTEC 2013", pp. 1-5.

Schrittesser, B., Pinter, G., Schwarz, T., Nagy, T., Urban, M. (4/2013). "Fracture and fatigue behaviour of elastomers used in the oil and gas industry", in Proc. "High Performance Polymers for Oil and Gas Industry", pp. 1-12.

2012

Berger, G.R., Pacher, G., Friesenbichler, W. (12/2012). "Influence of dynamic mold temperature processes on the weld line strength of bi-directional filled tensile bars. A new multi-functional test injection mold to examine surface defects, thin-wall parts and frozen layer formation", in Proc. "28th Annual Conference of Polymer Processing Society", pp.

Geissler, B., Uray, A., Laske, S., Langecker, G.R., Holzer, C. (12/2012). "The effect of particle size and coating of CaCO3 on the foaming behavior of a styrene butadiene block copolymer", in Proc. "PPS 28 Konferenzproceedings".

Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Kern, W. (12/2012). "Evaluation of different methods to characterize failure mechanisms of composite materials used as electrical insulation  in high voltage applications", in Proc. "27th World Congress of the Polymer Processing Society ", paper 1059.

Mattausch, H., Jana, S.C. (12/2012). "Investigation of sorbitol/polyhedral oligomeric silsesquioxane /carbon nanotubes / polypropylene nanocomposite spun fibers", in Proc. "PPS 28 Konferenzproceedings".

Mattausch, H., Laske, S., Duretek, I., Cirar, K., Flachberger, H., Holzer, C. (12/2012). "Investigation of rheological, thermal and mechanical properties of expanded perlite/polypropylene composites", in Proc. "PPS 28 Konferenzproceedings".

Pacher, G., Berger, G.R., Friesenbichler, W., Weiß, H. (12/2012). "Functional mold coatings for dynamic mold surface temperature control in injection molding. Simulation of the Joule Heating of thin films and development of a test system", in Proc. "28th Annual Conference of Polymer Processing Society", pp. 1-4.

Tscharnuter, D. (12/2012). "Mikromechanische Modellierung von PP-compounds", in Proc. "21. Leobener Kunststoff-Kolloquium - Mit Compoundieren zum Erfolg", pp. 47-52.

Kisslinger, T., Lucyshyn, T., Langecker, G.R., Holzer, C. (11/2012). "Influence of masterbatches on the bond strength of two-shot molded parts", in Proc. "Polymer Processing Society 28th Annual Meeting - PPS-28", pp. 1-4.

Schrittesser, B., Pinter, G., Schwarz, T., Nagy, T., Major, Z. (11/2012). "Characterization of the temperature dependent fracture behavior of HNBR based elastomers used in oil and gas industry", in Proc. "10. Kautschuk-Herbst-Kolloquium", pp. 112.

Arbeiter, F., Frank, A., Pinter, G. (9/2012). "Comparison of long-term-properties of polyolefin pipe grades using linear elastic fracture mechanics", in Proc. "PPXVI", pp. 1-10.

Frank, A., Pinter, G., Kapur, M., Nezbedová, E. (9/2012). "Comparison of accelerated tests for PE grades lifetime assessment", in Proc. "PPXVI", pp. 1-9.

Frank, A., Redhead, A., Kratochvilla, T., Dragaun, H., Pinter, G. (9/2012). "Accelerated Material Ranking with Cyclic CRB Tests", in Proc. "PPXVI", pp. 1-10.

Gager, J., Pettermann, H.E. (9/2012). "Multi-layered textile composites – A shell element based homogenization approach", in Proc. "6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)", pp. 1-12.

Knapp, G., Oreski, G., Pinter, G. (9/2012). "Fatigue behaviour of thin films at high frequencies - Effect of layer configurations", in Proc. "P2012".

Pettermann, H.E., Gager, J. (9/2012). "Elasto-Plasto-Damage Modeling of Laminated Composites", in Proc. "6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)", pp. 1-7.

Redhead, A., Frank, A., Pinter, G. (9/2012). "Accelerated Investigation of the Effect of Chlorine Dioxide on the Long-Term Failure Behavior and the Material Aging of Polyethylene for Raised Temperature Resistance", in Proc. "PPXVI", pp. 1-10.

Cichosz, J., Wehrkamp-Richter, T., Hinterhölzl, R., Drechsler, K. (6/2012). "Material Modelling of 2x2 braided compsoites using a beam approach", in Proc. "ECCM 15" (USB-Stick).

Gager, J., Pettermann, H.E. (6/2012). "Assessing the operation load range of non-linear textile composites by means of stress envelops", in Proc. "15th European Conference on Composite Materials (ECCM 15)", ISBN 978-88-88785-33-2.

Grössing, H., Wolfahrt, M., Müller, A., Schledjewski, R. (6/2012). "Comparison of permeability measurements of several fibre textiles using different measurement methods", in Proc. "ECCM 15", (USB-Stick).

Jölly, I., Wolfahrt, M., Wolfberger, A., Pinter, G., Kern, W., Noisternig, J. (6/2012). "Study of mechanical and physico-chemical surface properties of composites and their impact on bond strengths in repair technologies", in Proc. "ECCM 15", (USB-Stick).

Tscharnuter, D., Gastl, S., Pinter, G. (6/2012). "A pressure-dependent Schapery model for polyoxymethylene", in Proc. "SEM Annual Conference", pp. 1-10.

Frank, A., Redhead, A., Pinter, G. (4/2012). "The Influence of Test Frequency and Eccentric Crack Growth on Cyclic CRB Tests", in Proc. "ANTEC 2012", pp. 1-6.

Redhead, A., Frank, A., Pinter, G. (4/2012). "Accelerated Investigation of the Media Resistance of Polyethylene for Geomembrane Application", in Proc. "ANTEC 2012", pp. 1-6.

Badshah, A., O'Leary, P., Harker, M., Tscharnuter, D. (3/2012). "Strain analysis by regularized non-rigid registration", in Proc. "SPIE 8300", pp. 1-6.

Hirner, M. (3/2012). "Wissensmanagementsystem", in Proc. "WerWasWo. Forschung@MUL", pp. 95.

Kisslinger, T. (3/2012). "Verbundhaftung im Mehrkomponenten-Spritzguss", in Proc. "WerWasWo. Forschung@MUL", pp. 117.

Rachbauer, R., Gengler, J. J., Voevodin, A. A., Resch, K., Mayrhofer, P. H. (3/2012). "Temperature driven evolution of thermal, electrical, and optical properties of Ti-Al-N coatings", in Proc. "Acta Materialia", pp. 2091-2096.

Wolfahrt, M., Cichosz, J., Gager, J., Hinterhölzl, R.T., Pettermann, H.E., Frieß, S., Pinter, G.,  Noisternig, J. (1/2012). "Werkstoffcharakterisierung, Materialmodellierung und Simulation von CFK-Geflechtlaminaten", in Proc. "20. Leobener Kunststoff-Kolloquium, Polymerer Leichtbau", pp. 101-110.

2011

Weber, A., Resch, K. (12/2011). "Thermotropic glazings for overheating protection applications: Tuning the light-shielding efficiency by systematic material pre-selection and formulation", in Proc. "Conference Proceedings of the 6th Energy Forum", pp. 73-77.

Berger, I., Wolfahrt, M., Pinter, G. (11/2011). "Einfluss der Faserarchitektur auf die mechanischen Eigenschaften und die Schadenstoleranz von Geflechtlaminate", in Proc. "20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau", pp. 187-192.

Bodner, T., Wirnsberger, B., Albering, J., Wiesbrock, F. (11/2011). "Anhydrous thallium hydrogen L-glutamate: Polymer networks formed by sandwich layers of oxygen-coordinated thallium ions cores shielded by hydrogen L-glutamate counterions", Dalton Transactions, vol. 40, pp. 10885-10888.

Kienzl, W., Berger, G.R., Friesenbichler, W. (11/2011). "Leichtbaupotentiale in der E-Mobility: Kunststofftechnische Herausforderungen beim Batteriegehäuse", in Proc. "20. Leobener Kunststoff-Kolloquium, Polymerer Leichtbau", pp. 131-142.

Kisslinger, T., Hirner, M., Lucyshyn, T., Langecker, G.R., Holzer, C. (11/2011). "EXINMOLD - a design support software for injection mold makers", in Proc.-CD "PPS 2011 - Asia/Australia Regional Meeting", pp. 1-4.

Kisslinger, T.,Lucyshyn, T., Doler, M., Langecker, G.R., Holzer, C. (11/2011). "Verbundhaftungsuntersuchungen an Zweikomponenten-Spritzgussteilen", in Proc. "20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau", pp. 153-162.

Pinter, G., Wolfahrt, M., Ladstätter, E. (11/2011). "Einfluss von Defekten auf das Langzeitermüdungsverhalten von Composites", in Proc. "20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau", pp. 169-174.

Redhead, A., Frank, A., Pinter, G. (11/2011). "Investigation of the Chemical resistance and the Material Aging Conditions of Polyethylene for Pipe Applications", in Proc. "EUROREC 2011", pp. 1-5.

Stelzer, S., Schillfahrt, C., Wolfahrt, M., Pinter, G . (11/2011). "Schadenstoleranz und interlaminares Risswachstum in Hochleistungsverbundwerkstoffen", in Proc. "20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau", pp. 83-92.

Tscharnuter, D., Gastl, S., Pinter, G. (11/2011). "Optimierte Auslegung durch druckabhängige nichtlinear viskoelastische Modellierung", in Proc. "20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau", pp. 143-152.

Wolfahrt, M., Cichosz, J., Gager, J., Hinterhölzl, R., Pettermann, H.E., Frieß, S., Pinter, G., Noisternig, J. (11/2011). "Werkstoffcharakterisierung, Materialmodellierung und Simulation von CFK-Geflechtlaminaten", in Proc. "20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau", pp. 101-112.

Ziegler, E., Macher, J., Gruber, D.P., Pölt, P., Kern, W., Lummerstorfer, T., Feldgitscher, C., Holzner, A., Trimmel, G. (11/2011). "Investigation of the influence of stearic acid on rubber-brass adhesion", Technical Meeting - ACS, pp. 2/1-2/.

Schrittesser, B., Pinter, G. (10/2011). "Impact of chemical and physical properties of H-NBR based elastomers on the rapid gas decompression performance", in Proc. "High Performance Thermoplastics & Composites for Oil and Gas Applications", pp. 1-10.

Gager, J., Flatscher, T., Pettermann, H.E. (9/2011). "Elasto-plasto-damage modeling of FRP fabrics – A shell unit cell approach", in Proc. “ECCOMAS 3rd Thematic Conference on Mechanical Response of Composites 2011 (Composites 2011)”, pp. 279-286.

Hausberger, A., Strohäussl, B., Summer, F., Gódor, I., Schwarz, T. (9/2011). "Untersuchung der tribomechanischen und werkstoffphysikalischen Eigenschaften an gefüllten und ungefüllten TPU-Modellwerkstoffen", in Proc. "52. Tribologie-Fachtagung", pp. 56/1-56/11.

Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W. (9/2011). "Review of different methods to characterize composite materials used in high voltage applications", in Proc. "Advances in polymer science and technology 2", pp. 32.

Oreski, G., Möller, K. (9/2011). "Qualification of Polymeric Components for Use in PV Modules", in Proc. "SPIE Optics & Photonics 2011", Paper No. 8112-10.

Oreski, G., Pinter, G. (9/2011). "Comparative study of the temperature dependent delamination behavior of FOUR solar cell encapsulants to glass and backsheet-laminate", in Proc. "26th PVSEC 2011", pp. 4.AV.1.04.

Major, Z., Schrittesser, B., Pinter, G. (5/2011). "Development of an instrumented autoclave for rapid gas decompression experiments", in Proc. "Zweite Tagung Innovation Messtechnik", pp. 1-2.

Berger, G.R., Roock, S., Gießauf, J., Gruber, D.P.,  Friesenbichler, W., Steinbichler, G. (3/2011). "Improving the polymer surface quality by infrared radiation driven dynamic mold temperatur control", in Proc. "27th Annual Conference of Polymer Processing Society", (Polymer Processing Society, ed.), pp. 1-7.

2010

Maier, E., Haas, W., Santis Alvarez, A., Rath, T., Hofer, F., Stelzer, F., Trimmel, G (11/2010). "Polymer - CuInS2 hybrid solar cells obtained by an in-situ formation route", in Proc. "35th IEEE Photovoltaic Specialists Conference (PVSC)", pp. 003365-003368.

Schrittesser, B., Major, Z., Olah, L., Schwarz, T. (11/2010). "Implementation of an In-Situ Constrained Test Set Up for Rapid Gas Decompression Failure Analysis", in Proc. "9th Fall Rubber Colloquium", pp. 295-297.

Frank, F., Hartl, A.M.,  Redhead, A., Pinter, G. (10/2010). "Bestimmung von Kerbtiefen an grabenlos verlegten Polyethylen-Rohrleitungen", in Proc. "ÖGL Dymposium Grabenlos 2010", pp. 101-112.

Oreski, G. (10/2010). "Forschungsbereich Polymere Werkstoffe für die Photovoltaik", in Proc. "8. Österreichische PV Tagung", pp. 1.

Stelzer, S., Pinter, G., Wolfahrt, M., Brunner, A.J., Noisternig, J. (10/2010). "Cyclic interlaminar crack growth in unidirectional and braided composites", in Proc. "Fifth International Conference of Fatigue of Composites", pp. 63-75.

Berger, G.R., Friesenbichler, W. (9/2010). "Overview of influences on demolding forces in injection molding", in Proc. "4th International PMI Conference 2010", pp. 197-206.

Frank, A., Bruckmoser, K., Redhead, A., Gruber, D.P., Pinter, G. (9/2010). "Investigation of the slow crack growth behavior of static and cyclic loaded specimens of polyethylene by 2D and 3D optical fracture surface analysis", in Proc. "Austrian-Slovenian Polymer Meeting 2010", pp. 145.

Frank, A., Hofmann, A., Haager, M., Pinter, G. (9/2010). "Polyethylene Close-fit-liner - Material Properties and Long-Term Failure Behavior", in Proc. "Plastic Pipes XV Conference Proceedings", pp. 1-11.

Frank, A., Pinter, G., Lang, R.W. (9/2010). "Fracture Mechanics Lifetime Prediction of PE 80 and PE 100 Pipes under Complex Loading Conditions", in Proc. "Plastic Pipes XV Conference Proceedings", pp. 1-10.

Grabmayer, K., Wallner, G.M., Oreski, G. (9/2010). "Physical characterization of EVA embedding materials for solar cells", in Proc. "Proceedings 25th PVSEC 2011", pp. 1-3 (4.AV.3.22).

Gruber, D.P., Friesenbichler, W. (9/2010). "Novel methodologies for the measurement of perceptual surface properties", in Proc. "Austrian-Slovenian Polymer Meeting 2010", pp. 63.

Kahlen, S., Wallner, G.M., Lang, R.W. (9/2010). "Aging Behavior of Polymeric Absorber Materials for Solar Thermal Collectors", In Proc. "Proceedings of P2010, 14th International Scientific Conference on Polymeric Materials", pp. SL-E03.

Oreski, G. (9/2010). "Accelerated indoor durability testing of polymeric photovoltaic encapsulation materials", in Proc. "Proceedings SPIE Optics & Photonics 2010", pp. 1-11 (77730D).

Oreski, G., Möller, K., Wallner, G.M. (9/2010). "Qualification of Polymeric Components for Use in PV Modules: Identification and Evaluation of Appropriate Degradation Indicators", in Proc. "Proceedings 25th PVSEC 2010", pp. 1-7 (4.AV.3.30).

Pinter, G., Frank, A., Redhead, A., Lang, R.W. (9/2010). "Cyclic CRB Tests - A Quick and Reliable Tool for Ranking of PE Pipe Grades", in Proc. "Plastic Pipes XV Conference Proceedings", pp. 1-8.

Stelzer, S., Wolfahrt, M., Pinter, G., Reden, von T., Noisternig, J. (9/2010). "Damage Tolerance and interlaminar crack growth of braided composites", in Proc. "ECCM-14 - 14th European Conference on Composite Materials (USB-Stick)".

Weber, A., Resch, K., Teichert, C. (9/2010). "Atomic Force Microscopy Studies on the Morphology of Polymeric Thermotropic Glazings for Overheating Protection Applications", in Proc. "Proceedings of P2010, 14th International Scientific Conference on Polymeric Materials", pp. 1-5.

Ziegler, E., Gruber, D.P., Kern, W., Feldgitscher, C., Holzner, A., Trimmel, G. (9/2010). "Investigation of the binding-sulfide layer formation on brass-coated steel wires using squalene as low-molecular model compound for NR", in Proc. "Austrian-Slovenian Polymer Meeting 2010", pp. 205.

Berger, G.R.,  Friesenbichler, W., Teichert, C. (7/2010). "Replication of stochastic and geometric micro structures. Effects on functionality and visual appearance", in Proc. "Proceedings of the Polymer Processing Society 26th Annual Meeting (DVD)", pp. 1-5.

Gruber, D.P., Macher, J., Haba, D., Friesenbichler, W. (7/2010). "Novel methodology for the in-line measurement of the visual perceptibility of surface defects - 100 percent quality control", in Proc. "Proceedings of the Polymer Processing Society 26th Annual Meeting (DVD)", pp. 1-4.

Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G.R., Holzer, C. (7/2010). "Investigations of adhesion on two-shot moulded parts", in Proc. "Proceedings of the Polymer Processing Society 26th Annual Meeting (DVD)", pp. 1-5.

Lucyshyn, T., Knapp, G., Holzer, C. (7/2010). "Determination of the transition temperature at different cooling rates and its influence on prediction of shrinkage and warpage in injection moulding simulation", in Proc. "Proceedings of the Polymer Processing Society 26th Annual Meeting (DVD)", pp. 1-7.

Oreski, G., Wallner, G.M. (6/2010). "Damp heat induced physical aging of PV encapsulation", in Proc. "ITherm 2010", pp. 1-6, Las Vegas, USA.

Resch, K., Wallner, G.M., Lang, R.W. (6/2010). "Development and characterization of polymeric thermotropic materials for overheating protection of solar collectors", in Proc. "ANTEC 2010", (Society of Plastics Engineering, ed), pp. 1122-1126, Orlando, USA.

Frank, A., Hartl, A.M., Pinter, G., Lang, R.W. (5/2010). "Validation of an Accelerated Fracture Mechanics Extrapolation Tool for Lifetime Prediction of PE Pressure Pipes", in Proc. "ANTEC 2010", (Society of Plastics Engineering, ed), pp. 1638-1643, Orlando, USA.

Redhead, A., Pinter, G., Frank, A. (5/2010). "Accelerated Cyclic Fracture Mechanics Tests to Analyze Molecular and Morphological Effects on Slow Crack Growth in Modern PE Pipe Grades", in Proc. "ANTEC 2010", (Society of Plastics Engineering, ed.), pp. 360-364, Orlando, USA.

Stelzer, S., Wolfahrt, M., Pinter, G., von Reden, T., Noisternig, J. (5/2010). "Damage Tolerance and interlaminar crack growth of braided composites", in Proc. "ECCM-14 - 14th European Conference on Composite Materials", USB-Stick.

Schlögl, S., Temel, A., Schaller, R., Holzner, A., Kern, W. (3/2010). "Biological Evaluation and Chemical Characterization of Photochemically Crosslinked Surgical Gloves", in Proc. "6th Inernational Conference Latex & Synthetic Polymer Dispersions", pp. 1-8, Smithers Rapra, Amsterdam, NL.

2009

Rupp, B., Bauer, T., Slugovc, C. (11/2009). "Thiol-ene reaction as tool for crosslinking of polynorbornene micelles in the nanoscale", in Proc. "SPIE Optics + Photonics 2009", pp. 7393, 73930Y-1 - 73930Y-9.

Frank, A., Haager, M., Hofmann, A., Pinter, G., Lang, R.W. (10/2009). "Close-Fit Relining - Verfahrensbedingte Beeinflussung der Werkstoffeigenschaften und des Rohrlangzeitverhaltens", in Proc. "Tagungsband - ÖGL Symposium Grabenlos 2009", pp. 55-66.

Berger, G.R. (9/2009). "Übersicht über Variothermtechnologien. Bekannte und neue Technologien", in Proc. "Sensorik/Aktuatorik im Werkzeugbau", pp. 1-31, Leoben, A.

Bichler, S., Feldbacher, S., Woods, R., Satzinger, V., Schmidt, V., Jakopic, G., Langer, G., Kern, W. (9/2009). "Two-photon patterning of optical waveguides in flexible polymers", in Proc. "SPIE Conference on Optics and Photonics", vol. 7413.

Daschiel, U., Führer, R., Bauer, T., Jakopic, G., Satzinger, V., Schmidt, V., Kern, W. (9/2009). "Index Patterning of Photoreactive Polymers", in Proc. "SPIE - Optics and Photonics Conference", Vol. 7413, pp. 1-11.

Berger, G.R., Friesenbichler, W. (6/2009). "Demolding forces and coefficients of friction in injection molding. A new practical measurement apparatus", in Proc. "ANTEC 2009", (Society of Plastics Engineers, ed), pp. 1699-1703, Chicago, USA.

Berger, G.R., Friesenbichler, W., Lorenz, B., Burgsteiner, M. (6/2009). "Influences of surface roughness and polypropylene grade on demolding forces and coefficients of friction", in Proc. "25th Annual Meeting of the Polymer Processing Society", (Polymer Processing Society, ed.), pp. 1-5.

Berger, G.R., Friesenbichler, W., Perko, J. (6/2009). "Influences of steel grade and surface roughness on demolding forces in injection molding", in Proc. "TOOL 09", pp. 25-37.

Bregulla, M., Köhl, M., Lampe, B., Oreski, G., Philipp, D., Wallner, G.M., Weiß, K.A. (6/2009). "Degradation Mechanisms of Ethylene-Vinyl-Acetate Copolymer – New Studies including Ultra Fast Cure Foils", in Proc: 22nd European Photovoltaic Solar Energy Conference, 4.AV.3.39, Milano, I..

Duretek, I., Friesenbichler, W., Kucher, C. (6/2009). "Temperature and pressure dependence of thermal conductivity of polypropylene filled with micro-scale fillers", Advances in Polymer Science and Technology 1, Proceedings of a Conference on Polyolefins and Polymelamines at Johannes Kepler University Linz, Austria.

Duretek, I., Friesenbichler, W., Kucher, C. (6/2009). "Thermal Conductivity of Talc Filled Polypropylene Measured at High Pressures", in Proc. "25th Annual Meeting of the Polymer Processing Society, Goa, India, 2009..

Duretek, I., Friesenbichler, W., Kucher, C. (6/2009). "Thermal Conductivity of Talc Filled Polypropylene Measured at High Pressures", Program and Abstracts of the 25th Annual Meeting of the Polymer Processing Society, Goa, India, 2009, 135..

Frank, A., Pinter, G., Lang, R.W. (6/2009). "Lifetime Prediction of Polyethylene Pipes based on an Accelerated Extrapolation Concept for Creep Crack Growth with Fatigue Tests on Cracked Round Bar Specimens", in Proc. "ANTEC 2009", (Society of Plastics Engineers, ed), pp. 2169-2174, Chicago, USA.

Gruber, D.P., Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. (6/2009). "Measuring distinctness of image of high gloss surfaces", in Proc. "Proceedings of the 67th Annual Technical Conference & Exhibition", (SPI, ed.), pp. 1081-1084.

Guster, C., Pinter, G., Eichlseder W., Lang, R.W. (6/2009). "Some Influences on the Fatigue Behaviour of Short-Glassfiber-Reinforced Polymers", Experimental Analysis of Nano and Engineering Materials and Structures, Proceedings of the 13th International Conference on Experimental Mechanics, 1.-6.7.2007, Alexandroupolis (GR), pp. 125 - 126, ISBN 978-1-4020-6238-4..

Hutar, P., Ševcík, M., Náhlík, L., Mitev, I., Frank, A., Pinter, G. (6/2009). "Numerical simulation of the failure behavior of PE pressure pipes with additional loads", in Proc. "ANTEC 2009", (Society of Plastics Engineers, ed), pp. 2163-2168, Chicago, USA.

Jerabek, M., Major, Z., Lang, R.W. (6/2009). "Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled pp composites under tension", in Proc. "Eurofillers 2009", pp. 18-22.

Oreski, G., Wallner, G. (6/2009). "Aging mechanism and delamination behaviour of polymeric multi-layer films for PV encapsulation", in Proc. "Solar World Congress 2005", (Goswami, D.Y., Vijayaraghaven, S., Campbell-Howe, B., eds), 1352, American Solar Energy Society, Orlando, USA.

Oreski, G., Wallner, G. (6/2009). "Aging mechanisms of polymeric films for PV encapsulation", in Proc. „2. Leobener Symposium Polymeric Solar Materials - Solartechnik - neue Möglichkeiten für die Kunststoffbranche“, (Wallner, G.M., Lang, R.W., eds), XXII-1, Leoben, A.

Oreski, G., Wallner, G., Randel, P. (6/2009). "Characterization of silicon based thermoplastic elastomer for PV encapsulation", in Proc: 23rd European Photovoltaic Solar Energy Conference, 4.AV.3.48, Valencia, E.

Schlögl, S., Schaller, R., Holzner, A., Kern, W. (6/2009). "Photochemical crosslinking of latex - a new process for production of non-allergenic latex articles", in Proc. "Proceedings of the International Rubber Conference Nürnberg 2009", pp. 1-12 (CD-Rom).

Fleischer, H., Brune, M., Thornagel, M., Thomas, B., Guster, C. (3/2009). "Von der Spritzgießsimulation zur Betriebsfestigkeitsdimensionierung – Entwicklung und Einsatz einer durchgängigen Simulationskette", in Proc. "Kunststoffe im Automobilbau 2009", pp. 1-23.

Guster, C., Pinter, G., Fleischer, H., Lang, R.W., Eichlseder, W. (3/2009). "Betriebsfeste Dimensionierung von faserverstärkten Kunststoffkomponenten - eine durchgängig Simulationskette von der Spritzgußsimulation zur Schädigungsrechnung", in Proc. "IKV-Fachtagung: Kunststoffgerecht simulieren - Auslegung von Spritzgussbauteilen mit CAE", pp. 1-10.

Kisslinger, T., Fischer, K., Lucyshyn, T., Langecker, G.R. (3/2009). "Calculation of Residual Stresses in the Insert Molding Process Using the Finite Element Method", in Proc. "PPS-25 Program & Abstracts", pp. 146, Personal Graphics & Advertiser Pvt. Ltd., Goa, Indien.

Kisslinger, T., Fischer, K., Lucyshyn, T., Langecker, G.R. (3/2009). "Calculation of Residual Stresses in the Insert Molding Process Using the Finite Element Method", in Proc. (CD) "PPS-25 Proceedings", pp. 1-2.

Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P., Burkhalter, R., Langecker, G.R. (3/2009). "Biopolymer Paper for Laser Printing Applications", in Proc. "PPS-25 Program & Abstracts", pp. 78, Personal Graphics & Advertiser Pvt. Ltd., Goa, Indien.

Pinter, G., Wolfahrt, W., Kitzmueller, W., Lintschinger, M., Kuntz, J. (3/2009). "Effect of polymer matrix on quasi-static and fatigue filled hole tension and compression tests in liquid moulding non-crimp fabric composites", in Proc. "SAMPE 2009", pp. 1-7.

Wolfahrt, M., Pinter, G., Zaremba, S., Ladstätter, E., von Reden, T., Ebel, C. (3/2009). "Braided Fabrics: Development and evaluation of adequate test methodologies for generating design allowables", in Proc. "SAMPE 2009", pp. 1-7.

Schrittesser, B., Major, Z., Filipscei, G. (10/2008). "Dynamic mechanical behavior of polydimethylsiloxane based magneto rheological elastomers", Conference Papers IOM Communications Ltd ISBN: 978-1-86125-172-5, pp. 1-6.

Frank, A., Pinter, G., Lang, R.W. (9/2008). "A Novel Qualification Procedure for Lifetime and Safety Assessment of PE Pressure Pipes for Arbitrary Installation Conditions", in Proc. "Plastics Pipes Conference XIV", pp. 1-12.

2008

Frank, A., Podingbauer, T., Liedauer, S., McCarthy, M., Haager, M., Pinter, G. (9/2008). "Characterization of the Property Profile of Old PE Gas Pipes in Service for up to 30 Years", in Proc. "Plastics Pipes Conference XIV", pp. 1-10.

Gamse, T., Marr, R., Wolf, C., Lederer, K. (9/2008). "Impregnation of Polyethylene components for medical purposes by supercritical carbon dioxide", in Proc. "8th Conference on Supercritical Fluids and Their Applications", pp. 643-646, Ischia, I.

Gamse, T., Marr, R., Wolf, C., Lederer, K. (9/2008). "Supercritical CO2 Impregnation of Crosslinked Ultra-High Molecular Weight Polyethylene (UHMW-PE) Components for Medical Purposes with &#945; Tocopherol", in Proc. "3rd International Meeting on High Pressure Chemical Engineering", CD-ROM IV-11.pdf, Erlangen, D.

Major, Z., Lang, R.W. (9/2008). "Characterization of the fracture and fatigue behaviour of elastomer composites", in Proc. "Euromech Colloquium 502, Reinforced Elastomers: Fracture Mechanics, Statistical Physics and Numerical Simulations", pp. 71-74, Institut für Statik und Dynamik der Tragwerke, Technische Universität Dresden, Dresden, D.

Oreski, G., Wallner, G. (9/2008). "Characterization of silicon based thermoplastic elastomer for PV encapsulation", in Proc. "The 23rd European Photovoltaic Solar Energy Conference", pp. 1-3.

Wallner, G.M., Hausner, R., Resch, K., Schobermayr, H. (9/2008). "Entwicklung von Kunststoffkollektoren mit integriertem Überhitzungsschutz", in Proc. "Gleisdorf Solar 08", (AEE Intec, Hrsg.), pp. 85-90.

Kock, C., Schausberger, A., Aust, N., Gahleitner, M., Ingolic, E. (8/2008). "Polypropylene – Polyethylene Melts: Phase Structure Determination by Rheology", in Proc. "AIP Conference Proceedings 1027", (American Institute of Physics, Hrsg.), pp. 520-522, Monterey, California.

Berger, G. R., Friesenbichler, W., Schöfer, G., Freudenschuss, G. (6/2008). "A new practical measurement apparatus for demolding forces and coefficients of friction in injection molding", in Proc. "24. Jahrestagung der Polymer Processing Society", pp. 1-7, Salerno, I.

Frank, A., Mannsberger, G., Pinter, G., Lang, R.W. (6/2008). "Characterization of the Effects of Preforming and Redeforming on Morphology and Thermo-mechanical Properties of Polyethylene Close-fit Liners for Trenchless Pipe Rehabilitation", in Proc. "66th Annual Technical Conference & Exhibition", pp. 2251-2255, Society of Plastics Engineering.

Frank, A., Pinter, G., Lang, R.W. (6/2008). "Accelerated investigation of creep crack growth in Polyethylene pipe grade materials by the use of fatigue tests on cracked round bar specimens", in Proc. "Proceedings of the 66th Annual Technical Conference & Exhibition", pp. 2435-2439, Society of Plastics Engineers.

Gódor, I., Grün, F., Major, Z., Vezér, Sz., Leitgeb, A. (6/2008). "Tribological and Material Properties of PTFE-Bz-Compounds - Do They Correspond?", in Proc. "13th Nordic Symposium on Tribology", pp. 1-14, Finnish Society for Tribology, Tampere, Finnland.

Jansson, N.E., Lutz,A., Wolfahrt, M., Sjunnesson, A (6/2008). "Testing and analysis of a highly loaded composite flange", in Proc. "13th European Conference on Composite Materials (ECCM-13)", Stockholm, Schweden.

Lucyshyn, T. Langecker, G.R., Fischer, K. (6/2008). "Measurement of pvT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data", in Proc. "PPS-24 The Polymer Processing Society 24th Annual Meeting - Book of Abstracts", pp. 155, Salerno, I.

Lucyshyn, T., Langecker, G.R., Fischer, K. (6/2008). "Measurement of pvT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data", in Proc. "PPS-24 The Polymer Processing Society 24th Annual Meeting - Program and Proceedings", pp. 1-5, Salerno, I.

Guster, C., Pinter, G., Balika, W., Eichlseder, W., Lang, R.W. (4/2008). "Fiber orientation and fatigue behavior of a short glass-fiber reinforced partial aromatic polyamide", in Proc. "2nd Fatigue Symposium Leoben", pp. 444-455.

Tscharnuter, D., Jerabek, M., Major, Z. (4/2008). "Poisson's ratio of Polypropylene in relaxation, creep and monotonic tensile tests", in Proc. CD "Mechanics of Time Dependent Materials Conference", Monterey, USA.

Unger, B., Fleischer, H., Guster, C., Pinter, G. (4/2008). "Lebensdauerberechnung für Kunststoffkomponenten", in Proc. "DVM Bericht 675: DVM Tag 2008 Leichtbaustrategien - Ein wesentlicher Beitrag zur Klimadebatte", pp. 39-51.

Gódor, I., Major, Z., Vezér, S., Leitgeb, A. (3/2008). "Development of a tribological functional and failure model for PTFE-Bz-Compounds", in Proc. "XXXIV Summer School Advanced Problems in Mechanics", pp. 181-192.

Jerabek, M., Tscharnuter, D., Major, Z., Ravi-Chandar, K. (3/2008). "On the Pressure Dependence of Neat and Particle Filled Polypropylene Compounds", in Proc. "Mechanics of Time Dependent Materials Conference 2008".

Kahlen, S., Wallner, G. (2/2008). "Aging behavior of polymeric solar thermal absorber materials", in Proc. "2. Leobener Symposium - Polymeric Solar Materials", (Lang, R.W. und Wallner, G.M., Hrsg.), pp. XII-1 - XII-6, Institut für Werkstoffkunde und Prüfung der Kunststoffe, Montanuniversität Leoben, A.

Oreski, G., Wallner, G.M. (2/2008). "Aging mechanisms of polymeric films for PV encapsulation", in Proc. "2. Leobener Symposium - Polymeric Solar Materials", (Lang, R.W. und Wallner, G.M., Hrsg.), pp. XXII-1 - XXII-7, Institut für Werkstoffkunde und Prüfung der Kunststoffe, Montanuniversität Leoben, A.

Resch, K., Wallner, G.M. (2/2008). "Entwicklung und Charakterisierung thermotroper Materialien", in Proc. "2. Leobener Symposium - Polymeric Solar Materials", (Lang, R.W. und Wallner, G.M., Hrsg.), pp. XIV-1 - XIV-11, Institut für Werkstoffkunde und Prüfung der Kunststoffe, Leoben, A.

Schlögl, S., Temel, A., Saf, R., Kern, W., Schallar, R., Holzner, A. (1/2008). "Photochemical Pre-vulcanisation of NR Latex: A new process toward non allergenic latex articles", in Proc. "Latex and Synthetic Polymer Dispersions 2008", pp. 1-8, Rapra Technology, Madrid, E.

2007

Gódor, I., Grün, F.,  Major, Z. (11/2007). "Neue Erkenntnisse des tribologischen Verhaltens dreier TPU-Dichtungswerkstoffe", in Proc. "Reliability Engineering - Simulation und Monitoring von verschleißgefährdeten Systemen", pp. 63-73.

Jerabek, M., Steinberger, R., Major, Z. (9/2007). "Influence of glass bead and talc fillers on the time and temperature dependent tensile behavior of polypropylene compounds", in Proc. CD "ATEM 07".

Kahlen, S., Wallner, G. (9/2007). "Aging Behaviour of Polymeric Materials for Solar Thermal Absorber Applications", in Proc. "ISES Solar World Congress 2007", pp. 519-523, Tsinghua University Press, Beijing and Springer-Verlag GmbH Berlin Heidelberg.

Oláh, L., Borbás, L., Czigány, T. (9/2007). "Mechanical properties of calcium carbonate enhanced polycaprolactone scaffolds", in Proc. "24th Danubia-Adria-Symposium 2007", pp. 243-244.

Jerabek, M., Major, Z. (8/2007). "Volume Strain Measurements of particle-filled Polypropylene Compounds", in Proc. CD "Functional Fillers for Advanced Applications".

Feichter, C, Jerabek, M., Major, Z., Lang, R.W. (7/2007). "Method for Measuring Biaxial Deformation on Rubber and Polyproyplene Specimens", in Proc. "13th ICEM", pp. 273-275, Springer Verlag, Alexandroupolis, Griechenland.

Jerabek, M., Steinberger, R., Major, Z. (7/2007). "Development of a Compression Testing Tool and Methodology for Polymeric Materials", in Proc. "13th ICEM" pp. 471-473, Springer Verlag, Alexandroupolis, Griechenland.

Friesenbichler, W., Berger, G.R., Perko, J. (6/2007). "Abrasive/Corrosive wear on Plastic Mold Steels, measured under Pratical Processing Conditions", in Proc. "23. Jahrestagung der Polymer Processing Society", pp. 1-9.

Gódor, I., Grün, F., Eichlseder, W. (6/2007). "Test methods for the characterisation of different designed tribomaterials", in Proc. "Proceedings of the European Conference of Tribology", pp. 1123-1134.

Guster, C., Pinter, G., Major, Z.,  Eichlseder, W., Lang, R.W. (6/2007). "Characterization of the Fatigue Behavior of Short Glass Fiber Reinforced Polymers", in Proc. "PMA 2007 & 19th SRC 2007 Bratislava", Chemicke listy, Rocnik 101 Chlsac 101 (S) s1-s72 (2007) ISSN 0009 - 2770.

Fischer, K., Lucyshyn, T., Langecker, G.R., Wassertheurer, M. (5/2007). "Optical Measuring Technique for the verification of warpage computations with moldflow plastics insight", in Proc. "23. Jahrestagung der Polymer Processing Society", pp. 1-7.

Guster, C., Pinter, G., Eichlseder, W., Lang, R.W. (5/2007). "The Influence of Fiber-Orientation and Stress Ratio on the Fatigue Behavior of Short-Glass-Fiber-Reinforced Plastics", in Proc. "ANTEC 2007", (Society of Plastics Engineering, Hrsg.), pp. 284 -288, Cincinatti, USA.

Pinter, G., Haager, M., Lang, R.W. (5/2007). "Lifetime and Safety Assessment of PE Pressure Pipes based on Fracture Mechanics Fatigue Tests", in Proc. "ANTEC 2007", (Society of Plastics Engineers, Hrsg.), pp. 2921-2925, Cincinatti, USA.

2006

Berger, G.R., Langecker, G.R., Reitter, M., Jutz, S., Friesenbichler, W. (11/2006). "Hochglanzoberflächen von Spritzgussteilen, Herstellung und Charakterisierung", in Proc. "19. Leobener Kunststoffkolloquium: Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung", (Dr. W. Friesenbichler, DI S. Laske, ed.), pp. XII-1 - XII-16, Institut für Kunststoffverarbeitung, Montanuniversität Leoben, A.

Fischer, K., Langecker, G.R., Lucyshyn, T., Hirner, M. (11/2006). "EXINMOLD: Ein Expertensystem für die Entwicklung von Spritzgießwerkzeugen", in Proc. "19. Leobener Kunststoffkolloquium: Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung", (Dr. W. Friesenbichler, DI S. Laske, ed.), pp. XVIII-1 - XVIII-14, Institut für Kunststoffverarbeitung, Montanuniversität Leoben, A.

Friesenbichler, W., Berger, G.R., Perko, J. (11/2006). "Praxisnahe Prüfmethoden für die Messung des abrasiven und korrosiven Verschleißes", in Proc. "19. Leobener Kunststoffkolloquium: Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung", (Dr. W. Friesenbichler, DI S. Laske, ed.), pp. XVI-1 - XVI-21, Institut für Kunststoffverarbeitung, Montanuniversität Leoben, A.

Godor, I., Major, Z., Grün, F. (11/2006). "Tribologisches Werkstoffverhalten von Thermoplastischen Polyurethan Dichtungswerkstoffen", in Proc. "Symposium 2006 der Österreichischen Tribologischen Gesellschaft", pp. 57-64.

Gruber, D. (11/2006). "Neuartige Methoden zur quantiativen Charakterisierung des Erscheinungsbildes von Werkstoffoberflächen unter Berücksichtigung des menschlichen visuellen Wahrnehmungsprozesses", in Proc. "19. Leobener Kunststoffkolloquium: Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung", (Dr. W. Friesenbichler, DI S. Laske, ed.), pp. XIII-1 - XIII-6, Institut für Kunststoffverarbeitung, Montanuniversität Leoben, A.

Gruber, D., Berger, G.R. (11/2006). "Quantitative evaluation of plastics surface appearance aspects in accordance with the human perception", in Proc. "22nd Annual Meeting of the Polymer Processing Society", p. 219, Yamagata, Jp.

Lucyshyn, T., Duretek, I., Langecker, G.R., Fischer, K. (11/2006). "Spritzgießsimulation - Einfluss der Stoffdaten auf die Vorhersage von Schwindung und Verzug", in Proc. "19. Leobener Kunststoffkolloquium: Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung", (Dr. W. Friesenbichler, DI S. Laske, ed.), pp. XVII-1 - XVII-17, Institut für Kunststoffverarbeitung, Montanuniversität Leoben, A.

Guster, C., Eichlseder, W., Balika, W., Lang, R.W. (10/2006). "Anwendbarkeit des örtlichen Spannungskonzeptes zur betriebsfesten Auslegung von Bauteilen aus kurzglasfaserverstärkten Polymeren", in Proc. "24th CADFEM User`s Meeting 2006, International Congress on FEM Technology with 2006 German ANSYS Conference".

Haager, M., Pinter, G., Lang, R.W. (10/2006). "Ranking of PE-HD Pipe Grades by fatigue crack growth performance", in Proc. "Plastics Pipes XIII", (Plastics Pipes Conference Association, ed), pp. 1-11, Washington DC, USA.

Lang, R.W., Pinter, G., Balika, W., Haager, M. (10/2006). "A novel qualification concept for lifetime and safety assessment of PE pressure pipes for arbitrary installation conditions", in Proc. "Plastics Pipes XIII", (Plastics Pipes Conference Association, ed.), pp. 1-10, Washington DC, USA.

Godor, I., Major, Z., Vezer, S., Leitgeb, A. (9/2006). "Ableitung eines Materialmodells der tribologischen Funktionsweise von PTFE-Bz-Dichtungsmaterialien", in Proc. "47. Tribologie Fachtagung", pp. 38/1-38/10, Göttingen, D.

Feichter, C., Major, Z., Lang, R.W. (7/2006). "Comparison between Time-Independent FE-Simulation and Measurements for two types of Rubber", in Proc. "5th International Conference on Mechanics and Materials in Design, (J.F. Silva Gomes, Shaker A. Meguid, ed.), pp. 523-524, INEGI-Instituto de Engenharia Mecanica e Gestao Industrial, Leca do Balio, P.

Fischer, K., Lucyshyn, T., Langecker, G.R. (7/2006). "A Design Support System for Plastic Injection Molds", in Proc. "22nd Annual Meeting of the Polymer Processing Society", Yamagata, Jp.

Lucyshyn, T., Langecker, G.R., Duretek, I., Fischer, K. (7/2006). "Influence of pvT-data measured at high cooling rates on injection molding simulation results", in Proc. "22nd Annual Meeting of the Polymer Processing Society", Yamagata, Jp.

Major, Z., Feichter, C., Steinberger, R., Lang, R.W. (7/2006). "The Test Frequency dependence of the fatigue behavior of elastomers", in Proc. "Fracture of Nano and Engineering Materials", (E.E.Gdoutos, ed.), pp. 777-784, Springer Verlag, Alexandroupolis, Greece.

Major, Z., Kovacevic, Z., Kosir, M., Mesec, A., Lang, R.W. (7/2006). "Characterization of the Fatigue Behavior of Elastomer Composites", in Proc. "5th International Conference on Mechanics and Materials in Design", (J.F. Silva Gomes, Shaker A. Meguid, ed.), pp. 391-392, INEGI-Instituto de Engenharia Mecanica e Gestao Industrial, Leca do Balio, P.

Berger, G.R., Gruber, D.P., Friesenbichler, W., Langecker, G.R. (6/2006). "Detection of surface structure and appearance of injection molded parts", in Proc. "22nd Annual Meeting of the Polymer Processing Society", Yamagata, Jp.

Haager, M., Pinter, G., Lang, R.W. (6/2006). "Ranking of PE Pipe Grades by Cyclic Crack Growth Tests with Cracked Round Bar Specimens", in Proc. "ANTEC 2006", (Society of Plastics Engineers, Hrsg.), pp. 2475-2479, Charlotte, USA.

Kahlen, S., Wallner, G., Meir, M.G., Rekstad, J. (6/2006). "Aging behavior of polymeric materials for solar-thermal applications - Effect on ultimate mechanical properties", in Proc. "EuroSun 2006", pp. 150, Glasgow, UK.

Oreski, G. (6/2006). "Optical Properties of Ethylene Copolymer Films for Solar Energy Conversion", in Proc. "EuroSun 2006", pp. 1-5, Glasgow, UK.

Oreski, G., Wallner, G., Eder, R., Krasser-Lamik, R. (6/2006). "Weathering of Commercial Ethylene Copolymer Films - Spectroscopical Analysis of Aging Behaviour and Additive Diffusion", in Proc. "EuroSun 2006", pp. 1-6, Glasgow, UK.

Berger, G.R., Friesenbichler, W., Langecker, G.R., Hiebler, B., Perko, J., Caliskanoglu, D. (5/2006). "A new practical testing apparatus to evaluate corrosion on plastic mold steels", in Proc. "7th International Tooling Conference (Tool 06)", pp. 291-298.

Pinter, G., Haager, M., Lang, R.W. (5/2006). "Accelerated quality assurance tests for PE pipe grades", in Proc. "ANTEC 2006", (Society of Plastics Engineers, Hrsg.), pp. 2480-2484, Charlotte, USA.

Pinter, G., Ladstätter, E., Lang, R.W. (5/2006). "Effect of artifical defects on the fatigue behavior of RTM-laminates", in Proc. "ANTEC 2006", (Society of Plastics Engineers, Hrsg.), pp. 133-137, Charlotte, USA.

Brune, M., Fleischer, H., Guster, C., Balika, W. (3/2006). "Rechnerische Lebensdauerabschätzung für Bauteile aus kurzglasfaserverstärkten Kunststoffen", in Proc. "Kunststoffe im Automobilbau 2006", VDI-Gesellschaft Kunststofftechnik, pp. 321-342,  Düsseldorf, D.

Guster, C., Balika, W., Lang, R.W., Eichlseder, W. (3/2006). "Betriebsfestigkeitsuntersuchungen von faserverstärkten Kunststoffen", in Proc. "1. Leobener Betriebsfestigkeitstage", (Lehrstuhl für Allgemeinen Maschinenbau, Montanuniversität Leoben, ed.), pp. 279-292.

Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T., Lang, R.W. (3/2006). "Development of a test and fatigue analysis methodology for elastomeric seals exposed to explosive decompression", in Proc. "5th International Merl Conference, Oilfield Engineering with Polymers", pp. 1-18.

Wolfahrt, M., Pilz, G., Lang, R.W., Eugen, R., Krumlacher, W., Plessing, A.K. (3/2006). "Influence of the curing degree on key resin properties of high Tg epoxy resins for composites", in Proc. "27th International SAMPE Europe Conference 2006 of the Society for the Advancement of Materials and Process Engineering", pp. 214-319.

Wolfahrt, M., Pilz, G., Lang, R.W., Ladstätter, E. (3/2006). "Control of a resin transfer moulding process using dielectric and thermal analysis", in Proc. "27th International SAMPE Europe Conference 2006 of the Society for the Advancement of Materials and Process Engineering", pp. 309-313.

Oreski, G., Wallner, G. (1/2006). "Structure-Infrared Optical Property-Correlations of Polar Ethylene Copolymer Films for Transparent Insulation and Greenhouse Applications", ISES 2005 Solar World Congress, International Solar Energy Society (ISES), Orlando, Florida, USA.

2005

Feichter, C., Major, Z., Lang, R.W. (12/2005). "Experimental determination of fatigue crack growth behavior and surface strain distribution of faint waist pure shear specimens with different crack tip radii", in Proc. "Rubber Expo TM 05; Technical`05, Fall 168th Technical Meeting & Rubber Business Summit", (American Chemical Society, Hrsg.), Pittsburgh, USA.

Ladstätter, E., Pinter, G., Lang, R.W. (11/2005). "Tensile Compression Fatigue Behavior of RTM-Laminates", in Proc. "SAMPE Fall Technical Conference", (Society for the Advancement of Material and Process Engineering, Hrsg.), Seattle, USA.

Feichter, C., Major, Z., Lang, R.W. (10/2005). "Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by finite element simulation and experiments", in Proc. "Constitutive Models for Rubber IV", (Austrell and Kari, Hrsg.), pp. 89-95, Balkema Publ., London, UK.

Feichter, C., Major, Z., Lang, R.W. (10/2005). "Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by image correlation photogrammetry", in Proc. "2nd Youth Symposium on Experimental Solid Mechanics", (University of Bologna, Hrsg.), Parma, I.

Jerabek, M., Major, Z., Ravi-Chancar, K. (10/2005). "Relaxation behavior of heterogeneous polypropylene compounds under uniaxial and confined compression", in Proc. "5th International Conference on Mechanics of Time Dependent Materials", (Aoyama Gakuin University, Hrsg.), pp. 103-106, Karuizawa, J.

Kahlen, S., Wallner, G. Meir, M.G., Rekstad, J. (8/2005). "Investigations of polymeric materials for solar collector absorbers", in Proc. "North Sun 2005", (Applied Sciences Academy, Hrsg.), pp. 32-40.

Maier, G.A., Wallner, G., Lang, R.W., Fratzl, P. (8/2005). "Structural Changes during Plastic Deformation at Crack Tips in PVDF films - a semi-quantitative analysis", in Proc. "15th International Conference on Composite Materials" (ICCM-15).

Berger G.R., Friesenbichler, W., Langecker, G.R., Hödl, H.M. (6/2005). "Characterisation of surface reproduction in injection moulding process", in Proc. "21st Annual of the Polymer Processing Society", (Polymer Processing Society, Hrsg.), pp. XIV-1 - XIV-21 Leipzig, D.

Haager, M., Pinter, G., Balika, W., Lang, R.W. (6/2005). "Risswachstumsverhalten von PE-Rohrwerkstoffen", in Proc. "10. Problemseminar: Deformation und Bruchverhalten von Kunststoffen", (Institut für Polymerwerkstoffe e.V. - Martin Luther Universität, Hrsg.), Merseburg, D.

Hiesch, T., Haager, M., Pinter, G ., W., Lang, R.W. (6/2005). "Ranking von PE-Rohrwerkstoffen mittels Ermüdungsrisswachstum", in Proc. "10. Problemseminar: Deformation und Bruchverhalten von Kunststoffen", (Institut für Polymerwerkstoffe e.V. - Martin Luther Universität, Hrsg.), Merseburg, D.

Balika, W., Pinter, G., Lang, R.W. (5/2005). "Through-thickness process zone characterization at fatigue cracks in PE-HD", in Proc. "ANTEC 2005", (Society of Plastics Engineers, Hrsg.), pp. 3512-3516, Boston, USA.

Haager, M., Zhou, W., Pinter, G., Chudnovsky, A. (5/2005). "Studies of Creep and Fatigue Crack Growth in HD-PE pipe materials", in Proc. "ANTEC 2005", (Society of Plastics Engineers, Hrsg.), pp. 3538-3542, Boston, USA.

Pinter, G., Haager, M., Lang, R.W. (5/2005). "Ranking of PE pipe grades by their failure behavior under impact loads", in Proc. "ANTEC 2005", (Society of Plastics Engineers, Hrsg.), pp. 3551-3555, Boston, USA.

Temmel, S., Spanring, J., Buchgraber, C., Weinberger, M., Kern, W. (5/2005). "Photochemical modification and structuring of polymer surfaces", in Proc. "European Coatings Conference, Smart Coatings Conference, (Vincentz Verlag, Hrsg.), pp. 161-185.

Wolfahrt, M., Pilz, G., Lang, R.W. (4/2005). "Einfluss des Aushärtegrades auf wesentliche Werkstoffeigenschaften eines Epoxidharz-Matrixwerkstoffes", 15. Symposium: Verbundwerkstoffe und Werkstoffverbunde, (Gemeinschaftsausschuss Verbundwerkstoffe, Hrsg.), pp. 199-204, Kassel, D.

Major, Z. (3/2005). "Influence of crack tip sharpness and radius on the stress distribution analyzed using finite element simulation and experiments for rubbers", in Proc. "Fourth European Conference on Constitutive Models for Rubber (ECCMR 2005),.

Seyfriedsberger, G., Kern, W. (2/2005). "Surface Modification of Polymers Towards Antimicrobial Properties", in Proc. "5th International Symposium on Polymer Surface Modification", http://mstconf.com/SurfMod5-abs.htm.

Temmel, S., Kern, W., Luxbacher, T. (2/2005). "Surface Modification of Polyethylene by Photosulfonation", in Proc. "5th International Symposium on Polymer Surface Modification", http://mstconf.com/SurfMod5-abs.htm.

Fauster, E., Schalk, P., O`Leary, P. (1/2005). "Evaluation and Calibration Methods for the Application of a Video-Extensometer to Tensile Testing of Polymer Materials", in Proc "Machine Vision Applications in Industrial Inspection XIII (SPIE Vol. 5679)", (SPIE-IS&T, Hrsg.), pp. 187-198, San Francisco, USA.

Zahnt, B.-A., Lang, R.W. (1/2005). "Fatigue of Glass-Fiber Reinforced Plastics - Characterization Methods and Structure-Property-Relationsships", in Proc. "Series on Advances in Experimental Mechanics Volume 9", (Igor Emri, Hrsg.), pp. 107-144, Ljubljana, SL.

2004

Balika, W., Pinter, G., Lang, R.W. (11/2004). "Local deformation and failure at crack tips in thermoplastics pipe grades", in Proc. "18. Leobener Kunststoffkolloquium - Kunststoffrohre 2004", (Polymer Competence Center Leoben GmbH / Montanuniversität Leoben, Institut für Werkstoffkunde und Prüfung der Kunststoffe / Verband Leobener Kunststofftechniker, Hrsg.), pp. IX-1 - IX-10, Leoben, A.

Fertschej, A., Langecker, G.R., Wieczorek, A. (11/2004). "3D-Berechnung von Wendelverteilersystemen mittels FEM", in Proc. "18. Leobener Kunststoffkolloquium - Kunststoffrohre 2004", (Polymer Competence Center Leoben GmbH / Montanuniversität Leoben, Institut für Werkstoffkunde und Prüfung der Kunststoffe / Verband Leobener Kunststofftechniker, Hrsg.), pp. XVII-1 - XVII-12, Leoben, A.

Godor, I., Major, Z., Müller, H. (11/2004). "Untersuchung von PTFE-Bronze-Compounds für Dichtungszwecke", in Proc. "Reibung und Verschleiß im Spannungsfeld von Fahrzeugherstellern und deren Kunden", (Österreichische Tribologische Gesellschaft, Hrsg.), pp. 41-52, Seibersdorf, A.

Haager, M., Pinter, G., Lang, R.W. (11/2004). "Beschleunigte Prüfmethoden zur Charakterisierung des Langzeitverhaltens von thermoplastischen Rohrwerkstoffen", in Proc. "18. Leobener Kunststoffkolloquium - Kunststoffrohre 2004", (Polymer Competence Center Leoben GmbH / Montanuniversität Leoben, Institut für Werkstoffkunde und Prüfung der Kunststoffe / Verband Leobener Kunststofftechniker, Hrsg.), pp. VI-1 - VI-13, Leoben, A.

Lang, R.W., Pinter, G. (11/2004). "100 years service life guarantee for thermoplastics pipes - reality, potential or illusion", in Proc. "18. Leobener Kunststoffkolloquium - Kunststoffrohre 2004", (Polymer Competence Center Leoben GmbH / Montanuniversität Leoben, Institut für Werkstoffkunde und Prüfung der Kunststoffe / Verband Leobener Kunststofftechniker, Hrsg.), pp. XIII-1 - XIII-3, Leoben, A.

Major, Z., Godor, I., Resch, K. (11/2004). "Some contribution to the characterization of the development of transfer film for PTFE-Compound", in Proc. "Reibung und Verschleiß im Spannungsfeld von Fahrzeugherstellern und deren Kunden", (Österreichische Tribologische Gesellschaft, Hrsg.), pp.221-226, Seibersdorf, A.

Neumann, K., Lang, R.W., Pilz, G., Major, Z. (11/2004). "Dichtheits- und Festigkeitsprüfung von PE 100 Erdgasleitungen für einen Nenndruck von 10 bar", in Proc. "18. Leobener Kunststoffkolloquium - Kunststoffrohre 2004", (Polymer Competence Center Leoben GmbH / Montanuniversität Leoben, Institut für Werkstoffkunde und Prüfung der Kunststoffe / Verband Leobener Kunststofftechniker, Hrsg.), pp. XIV-1 - XIV-9, Leoben, A.

Rinderhofer, A., Pilz, G., Zahnt, B.-A., Major, Z., Lang, R.W. (11/2004). "GRP-UP pipe systems for specific applications - material development as core competence of the pipe manufacturer", in Proc. "18. Leobener Kunststoffkolloquium - Kunststoffrohre 2004", (Polymer Competence Center Leoben GmbH / Montanuniversität Leoben, Institut für Werkstoffkunde und Prüfung der Kunststoffe / Verband Leobener Kunststofftechniker, Hrsg.), pp. XXI-1 - XXI-19, Leoben, A.

Seyfriedsberger, G., Kern, W. (11/2004). "Antimikrobielle Oberflächenausrüstung von Kunststoffrohren", in Proc. "18. Leobener Kunststoffkolloquium - Kunststoffrohre 2004", (Polymer Competence Center Leoben GmbH / Montanuniversität Leoben, Institut für Werkstoffkunde und Prüfung der Kunststoffe / Verband Leobener Kunststofftechniker, Hrsg.), pp. V-1 - V-10, Leoben, A.

Talvensaari, H., Ladstätter, E., Lang, R.W., Billinger, W. (7/2004). "Measuring the Permeability of Preform Packages", in Proc. "7th International Conference on Flow Processes in Composite Materials", pp. 465-469, (University of Delaware, Hrsg.), USA.

Gruber, D., Meinhardt, G., Papousek, W. (6/2004). "Spatial distribution of light absorption in organic photovoltaic devices", in Proc. "EuroSun 2004", (ISES Europe, Hrsg.), pp. 3159-3168, PSE GmbH, Freiburg, D.

Oreski, G., Wallner, G., Skringer, A., Pertl, P., Plessing, A. (6/2004). "Delaminationsverhalten behaviour of multi-layer films for PV encapsulation purposes", in Proc. "EuroSun 2004", (ISES Europe, Hrsg.), pp.2-883-2-888, PSE GmbH, Freiburg, D.

Wallner, G., Hausner, R., Hegedys, H., Schobermayr, H., Lang, R.W. (6/2004). "Application demonstration and performance of a cellulose triacetate polymer film based transparent insulation wall heating system", in Proc. "EuroSun 2004", (PSE GmbH, Hrsg.), pp. 2-713 - 2-718, ISES Europe, Freiburg, D.

Gruber D., Meinhardt, G., Papousek, W. (5/2004). "Modeling the light absorption in organic photovoltaic devices", in Proc. "Solar Scell 2004", (Formatex, Hrsg.), Elsevier, pp. 82, Badajoz, E.

Haager, M., Pinter, G., Lang, R.W. (5/2004). "Applicability and Limitations of the FNCT-Methodology to Predict the Long Term Failure Behavior of Polyethylene-Pipe Materials", in Proc. "ANTEC 2004", (Society of Plastics Engineering, Hrsg.), pp. 4023 - 4027, Chicago, USA.

Ladstätter, E. (5/2004). "RTM-part development - The long way from an idea to serial production", in Proc. "International Symposium on Manufactoring Technology for Composite Aircraft Structures" (Deutsches Zentrum für Luft- und Raumfahrt; National Aerospace Laboratrory, Hrsg.), Braunschweig, D.

Lang R.W., Balika W., Major, Z., Pinter, G. (5/2004). "Applicability and Limitations of Fracture Mechanics Concepts for Lifetime Prediction of Polyethylene Pipes", in Proc. "ANTEC 2004", (Society of Plastics Engineering, Hrsg.), pp. 3976, Chicago, USA.

Pinter, G., Balika, W., Choi, B-H., Lang, R.W. (5/2004). "A Fatigue Approach for Lifetime Prediction of PE-HD Pipe Grades", in Proc. "ANTEC 2004", (Society of Plastics Engineers, Hrsg.), pp. 4028 - 4032, Chicago, USA.

Pinter, G., Ladstätter, E., Billinger, W., Lang, R.W. (5/2004). "Characterization of the Fatigue Behavior of RTM-laminates by Isocyclic Stress-Strain Diagrams", in Proc. "ANTEC 2004", (Society of Plastics Engineering, Hrsg.), pp. 1379-1383, Chicago, USA.

Wallner, G., Resch, K., Hlawacek, G., Teichert, C., Maier, G., Binder, W., Gahleitner, M. (5/2004). "Correlation between material structure, processing conditions and optical properties of PP cast films", in Proc. "ANTEC 2004", (Society of Plastics Engineers, Hrsg.), pp. 1096-1100, Chicago, USA.

Balika, W., Lang, R.W. (4/2004). "Modeling of Slow Crack Growth in PVC-U and PB based on Fatigue Crack Growth Experiments", in Proc. "Plastics Pipes XII" (Plastics Pipes Conference Association, Hrsg), Milano, I.

Ladstätter, E., Lang, R.W., Pinter, G., Billinger, W. (4/2004). "Fatigue behavior of RTM-laminates", in Proc. "SAMPE Europe 25th International Jubilee Conference, Material & Process Technology  - The Driver for tomorrow`s improved performance (K. Drechsler, Hrsg.), pp.95-100, Isenegger AG, Basel, CH.

Pinter, G., Haager, M., Balika, W., Lang, R.W. (4/2004). "Ranking of PE-HD Pipe Grades by Fatigue Crack Growth Performance", in Proc. "Plastics Pipes XII", (Plastics Pipes Conference Association, Hrsg.), Mailand, I.

Ladstätter, E., Pinter, G., Billinger, W., Lang, R.W. (3/2004). "Ermüdungsverhalten karbonfaserverstärkter RTM Laminate", in Proc. "10. Nationales Symposium des SAMPE Deutschland e.V.: Impulse für die Faserverbundtechnologie", (Society for the Advancement of Material and Process Engineering, Hrsg.), pp. 1-10, Dresden, D.

2003

Berger, G.R. (11/2003). "Messtechniken zur Bestimmung der Abformungsgüte von strukturierten Kunststoffoberflächen", in Proc. "17. Leobener Kunststoffkolloqium", (Institut für Kunststoffverarbeitung, o.Univ.-Prof. Dr.-Ing. G.R. Langecker, Hrsg.), pp. XIV-1 - XIV-22, Leoben, A.

Fischer, K., Lucyshyn, T. (11/2003). "Expertensysteme zur durchgängigen Entwicklung von Spritzgießwerkzeugen", in Proc. "17. Leobener Kunststoffkolloqium", (Institut für Kunststoffverarbeitung, Langecker, G.R., Hrsg.), pp. XIII-1 - XIII-12, Leoben, A.

Gruber, D. (11/2003). "Minimierung der Lichtreflexion in organischen Solarzellen", in Proc. "Polymeric Solar Materials", (Lang, R.W., Wallner, G., Hrsg.), pp. XXI 11-13, Leoben, A.

Gruber, D. (11/2003). "Optimierung der Lichtabsorption in organischen Solarzellen", in Proc. "Polymeric Solar Materials" (Lang, R.W., Wallner, G. Hrsg.), pp. XXI-7 - XXI-9, Leoben, A.

Lucyshyn, T., Fischer, K. (11/2003). "Auslegung von Spritzgießwerkzeugen mit Hilfe der FEM-Simulation", in Proc. "17. Leobener Kunststoffkolloqium", (Institut für Kunststoffverarbeitung, Langecker, G.R., Hrsg.), pp. XVI-1 - XVI-20, Leoben, A.

Oreski, G., Wallner, G., Skringer, A., Pertl, P., Plessing, A. (11/2003). "Untersuchung des Delaminationsverhaltens von Folienverbunden für die Einkapselung von PV-Modulen", in Proc. "Polymeric Solar Materials", (Wallner, G., Lang, R.W., Hrsg.), pp.XXI-21 - XXI-22, Leoben, A.

Wallner, G., Lang, R.W. (11/2003). "Entwicklung und Anwendungsdemonstration eines neuartigen transparenten Wärmedämmssystems basierend auf Kunststofffolien", in Proc. "Polymeric Solar Materials", (Wallner, G., Lang, R.W., Hrsg.), pp. XX-1 - XX-11, Leoben, A.

Wallner, G., Maier, G., Fratzl, P. (11/2003). "3D Small Angle X-Ray Scattering (SAXS) on deformed PVDF Foils", in Proc. "MRS Fall Meeting", (Materials Research Society, Hrsg.), pp. 1-7, Boston, USA.

Berger, G.R., Friesenbichler, W. (10/2003). "Beschichtungen an Spritzgießwerkzeugen", in Prod. "Werkstoffkongress: Coating", (Steirische Wirtschaftsförderung, Hrsg.), pp. 20, Leoben, A.

Pilz, G. (10/2003). "Langzeit-Deformationsverhalten polymerer Werkstoffe für Rohranwendungen", in Proc. "Fachtagung: Kunststoffrohrtage", Köln, D.

Pinter, G., Lang, R.W., Pilz, G., Balika, W. (10/2003). "Prüfmethoden für die Entwicklung von Rohrwerkstoffen", in Proc. "Polymeric Solar Materials" (Lang, R.W, Wallner, G., Hrsg.), pp. IXI-1 - IX-8, Leoben, A.

Haager, M., Pinter, G., Lang, R.W. (9/2003). "Einsatz von statischen und zyklischen bruchmechanischen Methoden zur Charakterisierung von Polyethylen Rohrleitungswerkstoffen", in Proc. "6. Bregenzer Rohrleitungstage - Fachaustellung" (ÖVGW, Hrsg.), pp. 16, Bregenz, A.

Langer, G., Keplinger, J., Ruplitsch, A., Saf, R., (9/2003). "Functional polymer surfaces generated by photochemical techniques", in Proc. "6th Austrian Polymer Meeting - XXIst International H.F. Mark - Symposium" (W. Binder, Hrsg.), pp. 45, Vienna, A.

Major, Z., Lang, R.W. (9/2003). "Charaterization of Table Tennis Racket Sandwich Rubbers", In Proc. "Science and Racket Sports III, Eighth International Table Tennis Federation Sports Science Congress and the Third World Congress of Science and Racket Sports", (A. Lees, J.-F. Kahn, I.W. Maynard, Hrsg.), pp. 146-151, Routledge, Paris, F.

Wallner, G., Lang, R.W., Platzer, W., Teichert, C. (9/2003). "Relationships between the structure and the solar optical properties of transparent polymer films", in Proc "PC 2003", (Polymer Science Group, Johannes Kepler Universität Linz, Hrsg.), Linz, A.

Zahnt, B.-A., Lang, R.W., Aumayr, G. (9/2003). "Fatigue of Glass-Fiber Reinforced Polyproylene (PP-GF)", in Proc. "6th Austrian Polymer Meeting - XXIst International H.F. Mark - Symposium" (W. Binder, Hrsg.), pp. 83, Vienna, A.

Wallner, G., Lang, R.W., Schobermayer, H., Hegedys, H., Hausner, R. (6/2003). "Development and application demonstration of a novel polymer film based transparent insulation wall heating system", in Proc. "ISES 2003", (International Solar Energy Society, Hrsg.), pp. 8, Göteborg, S.

Zahnt, B.-A., Lang, R.W. (6/2003). "Charakterisierung des Ermüdungsverhaltens von faserverstärkten Polymerwerkstoffen mittels isozyklischen Spannungs-Dehnungs-Diagrammen", in Proc. "9. Tagung Problemseminar "Deformation und Bruchverhalten von Kunststoffen", (Institut für Polymerwerkstoffe e.V., Fachbereich Ingenieurwissenschaften, Hrsg.),  pp. 273-284, Merseburg, D.

Major, Z., Lang, R.W. (3/2003). "Rate dependent fracture toughness of plastics", in Proc. "MicroCAD", (University of Miskolc, Hrsg.), pp. 77-84, Miskolc, H.

Books

2019

Wiesbrock, F. (09/2019). "Clickable Copoly(2-oxazoline)s for Drug Inclusion / API Attachment and Selective Cell Adhesion, Symposium on Innovative Polymers for the Nanomedicine of the 21st Century

Oreski, G., Omazic, A., Ottersböck, B. (06/2019). "Degradation Processes and Mechanism of Encapsulants", Durability and Reliability of Polymers and other materials in PV modules, pp. 135 - 153, ISBN: 978-0-12-811545-9

Schuecker, C., Fuchs, P. (Hrsg.) (04/2019). "Simulation in der Kunststofftechnik", 28. Leobener Kunststoffkolloquium: Simulation in der Kunststofftechnik, ISBN: 978-950-3248-9-1

2018

Kern, W. (Hrsg). (04/2018). "Print & Coat - Polymere in Druck- und Beschichtungstechnologien", 27. Leobener Kunststoff-Kolloquium: Print & Coat - Polymere in Druck- und Beschichtungstechnologien, ISBN: 978-3-9503248-8-4

 

2017

Kern, W. (Hrsg). (04/2018). "Print & Coat - Polymere in Druck- und Beschichtungstechnologien", 27. Leobener Kunststoff-Kolloquium: Print & Coat - Polymere in Druck- und Beschichtungstechnologien, ISBN: 978-3-9503248-8-4

Margossian, A. (09/2017). "Forming of tailored thermoplastic composite blanks: material characterization, simulation and validation", Taschenbuch, ISBN-12: 978-3843931830, 238 p

Arbeiter, M., Pinter, G., Lang, R. W., Frank, A. (09/2017). "Fracture Mechanics Methods to Assess the Lifetime of Thermoplastic Pipes", Deformation and Fracture Behaviour, Vol. 247, 1st ed. 2017, pp 33 - 54, DOI: 10.1007/978-3-319-41879-7_3

Böker, A. (Hrsg), Wiesbrock, F. (Hrsg). (06/2017). "Young talents in Polymer Science", Polymers, Vol. 1, ISBN 978-3-03842-458-1 (Pbk), ISBN 978-3-03842-459-8 (PDF)

Friesenbichler, W., Berger, G. (Hrsg). (04/2017). "Innovative Spritzgießtechnologie - Trends und aktuelle Entwicklungen", 26. Leobener Kunststoffkolloquium: Innovtive Spritzgießtechnologie - Trends und aktuelle Entsicklungen, ISBN:978-3-9503248-6-0

2016

Wiesbrock, F. (12/2016). "Interdisciplinary Approaches towards Materials with Enhanced Properties for Electrical Engineering", Micro- and Nanocomposites for Electrical Engineering Applications, Vol. 2016, pp XIII - XV

Plesa, I., Notingher, P. V., Schlögl, S., Sumereder, C., Muhr, M. (12/2016). "Properties of Polymer Composites Used in High-Voltage Applications", Micro- and Nanocomposites for Electrical Engineering Applications, Vol. 2016, pp 1 - 91

Moser, A., Feuchter, M. (12/2016). " Mechanical Properties of Composites Used in High-Voltage Applications", Micro- and Nanocomposites for Electrical Engineering Applications, Vol. 2016, pp 92 - 106

Fimberger, M., Tsekmes, I.-A., Kochetov, R., Smit, J. J., Wiesbrock, F. (12/2016). "Crosslinked Poly(2-oxazoline)s as "Green" Materials for Electronic Applications", Micro- and Nanocomposites for Electrical Engineering Applications, Vol. 2016, pp 221 - 236

Andraschek, N., Wanner, A. J., Ebner, C. M., Riess, G. (11/2016). "Mica/Epoxy Composites in Electrical Industry: Applications, Composites for Insulation, and Investigations on Failure Mechanisms for Prospektcive Optimizations", Nano- and Microcomposites for Electical Engineering Applications, Vol. 1, pp 107 - 137

Pinter, G. (Hrsg), Pilz, G. (Hrsg), Payer, M. (04/2016). "25. Leobener Kunststoffkolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt", 25. Leobener Kunststoffkolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt, ISBN: 978-3-9503248-5-3

2015

Fimberger, M., Wiesbrock, F. (12/2015). "MW-Assisted Polymer Syntheses and Modifications towards MW-Assisted Material Fabrication", Buch, Microwave Engineering of Nanomaterials, ISBN: 9789814669429

Holzer, C. (Hrsg), Payer, M. (11/2015). "24. Leobener Kunststoffkolloquium: Festkolloquium Kunststofferbarbeitung GRL 75", 24. Leobener Kunststoffkolloquium: Festkolloqium Kunststoffverarbeitung GRL 75, ISBN: 978-3-9503248-4-6

Holzer, C. (Hrsg), Laske, S. (Hrsg), Payer, M. (09/2015). "Regional Conference Polymer Processing Society Graz 2015, Book of Abstracts", Regional Conference Polymer Processing Society Graz 2015, Book of Abstracts

2014

Schledjewski, R. (Hrsg), Payer, M. (11/2014). "23. Leobener Kunststoffkolloquium: Hocheffiziente Verbundwerkstoffe", 23. Leobener Kunststoffkolloquium: Hocheffiziente Verbundwerkstoffe, ISBN: 978-3-9503248-3-9, pp 201 - 205

Gager, J., (6/2015). "Modeling and Simulation concepts for advanced braided composites", Fortschritt-Berichte VDI, pp 130, ISBN: 978-3-18-333818-4

Mattausch, H. (6/2014). "Properties and applications of nanoclay composites", Polymer Nanoclay Composites

2013

Kern, W. (11/2013). "Schriftenreihe Kunststofftechnik Leoben, Band 03, 22. Leobener Kunststoff-Kolloquium "Oberflächen und Grenzflächen in der Polymertechnologie"", Eigenverlag, Leoben.

2012

Köhl, M., Meir, M. G., Papillon, P., Wallner, G. M., Saile, S., (12/2012). "Polymeric Materials for Solar Thermal Applications", Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Holzer, C. (11/2012). "Schriftenreihe Kunststofftechnik Leoben, Band 02, 21. Leobener Kunststoff-Kolloquium: Mit Compoundieren zum Erfolg", Eigenverlag, Leoben.

2011

Schledjewski, R. (12/2011). "Schriftenreihe Kunststofftechnik Leoben, Band 01, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau", Eigenverlag, Leoben.

Stelzer, F., Wiesbrock, F. (12/2011). "Modern Trends in Polymer Science - EPF`09", Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

2008

Temmel, S., Höfler, T., Kern, W. (10/2008). "Modulation of the surface properties of reactive polymers by photo-Fries rearrangement", in "Contact Angle, Wettability and Adhesion", (K. L. Mittal, ed.), Vol. 5, pp. 229-238, VSP, Leiden, NL.

2007

Temmel, S., Kern, W. ,Luxbacher, T. (3/2007). "Surface modification of polyethylene by photosulfonation", 2007 (ISBN-13: 978 9067644 53 2), VSP Publishers, Utrecht (NL).

2006

Eder, G., Janeschitz-Kriegl, H., Ratajski, E. (5/2006). "Towards the Prediction of Structure Development in Injection Molded Semicrystalline Polymers", in "Precision Injection Molding, Process, Materials and Applications, (J. Greener and R. Wimberger-Friedl, ed.), Hanser Verlag, pp. 137-152.

Wolf, C., Lederer, K. (5/2006). "Stabilisierung von ultra-hochmolekularem Polyethylen (UHMW-PE) für Gelenksendoprothesen mit Tocopherol (Vitamin E)", in "Innovation Steiermark 2006", (Leykam Buchverlagsgesellschaft mbH & Nfg & Co KG, Hrsg.), pp. 55-56, Graz.

2003

Balika, W., Pinter, G., Lang, R.W. (11/2003). "Applicability of linear elastic fracture mechanics to fatigue in amorphous and semi-cristalline polymers", In "The Application of Fracture Mechanics to Polymers, Adhesives and Composites", (Moore, D.R., Hrsg.), Esis Publication 33, pp. 83-92, Elsevier, Oxford, UK.