Scientific Director Sandra Schlögl and Gernot Oreski, Head of Sustainable Polymer Solutions, represented PCCL at Messe Congress Graz on 18 November 2026. Organised by the Styrian Business Promotion Agency (SFG) and JOANNEUM RESEARCH under the motto “LET’S TRANSFORM!”, the event brought together around 1,700 guests from business, research and politics. A dedicated exhibition area focused on advanced materials.
When industrial façades generate electricity
One example from Oreski’s photovoltaic research was the FFG-funded PV Industriefassade project. Together with voestalpine Stahl GmbH, PCCL investigated how solar cells could be integrated directly into large steel façade panels. The steel sheet itself forms part of the module, while a transparent polymer film is designed to replace the conventional front glass. This could allow industrial façades to generate electricity. A key challenge is developing a bond between steel and polymer that can withstand temperature fluctuations, moisture and UV radiation for years.
Custom-fit orthoses made with 3D printing
The FFG-funded 3DFit4Wear project showed how orthoses can be tailored to an individual’s anatomy. The researchers combined 3D scanning, simulation and 3D printing. Using a digital model, they identified where material was needed for support and where it could be removed. For one forearm orthosis, the optimised design reduced material volume by more than 50 per cent while also reducing pressure at critical contact points.
How inspection systems learn to check new components
Following its presentation at the European Robotics and Automation Talks (ERAT), PCCL also showcased the COMET research project FastTeachInspect. The project aims to train automated inspection systems to check new components using just a few samples. The goal is to distinguish genuine surface defects more reliably from irregularities that do not affect component quality. This could shorten inspection times and reduce scrap.
Five layers in a cheese wrapper
The PCCL stand also featured polymers in everyday products. A cross-section under the microscope revealed the five layers of a cheese packaging film. Together, they limit the amount of oxygen entering the pack and help create a reliable seal. In “Guess the Polymer!”, visitors could handle plastic samples, guess what they were made of and check their answers using near-infrared spectroscopy.
Picture Copyright: SFG / moving stills